[PATCH 1/8] phy: qcom-qmp: pcs-pcie: Add v6.30 register offsets

[Qiang Yu]

x1e80100 SoC uses QMP phy with version v6.30 for PCIe Gen4 x8. Add the new
PCS PCIE specific offsets in a dedicated header file.

Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
---
 .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h    | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h
new file mode 100644
index 000000000000..5a58ff197e6e
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_30_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V6_30_H_
+
+/* Only for QMP V6_30 PHY - PCIE have different offsets than V6 */
+#define QPHY_PCIE_V6_30_PCS_POWER_STATE_CONFIG2		0x014
+#define QPHY_PCIE_V6_30_PCS_TX_RX_CONFIG		0x020
+#define QPHY_PCIE_V6_30_PCS_ENDPOINT_REFCLK_DRIVE	0x024
+#define QPHY_PCIE_V6_30_PCS_OSC_DTCT_ACTIONS		0x098
+#define QPHY_PCIE_V6_30_PCS_EQ_CONFIG1			0x0a8
+#define QPHY_PCIE_V6_30_PCS_G3_RXEQEVAL_TIME		0x0f8
+#define QPHY_PCIE_V6_30_PCS_G4_RXEQEVAL_TIME		0x0fc
+#define QPHY_PCIE_V6_30_PCS_G4_EQ_CONFIG5		0x110
+#define QPHY_PCIE_V6_30_PCS_G4_PRE_GAIN			0x164
+#define QPHY_PCIE_V6_30_PCS_RX_MARGINING_CONFIG1	0x184
+#define QPHY_PCIE_V6_30_PCS_RX_MARGINING_CONFIG3	0x18c
+#define QPHY_PCIE_V6_30_PCS_RX_MARGINING_CONFIG5	0x194
+#define QPHY_PCIE_V6_30_PCS_G3_FOM_EQ_CONFIG5		0x1b4
+#define QPHY_PCIE_V6_30_PCS_G4_FOM_EQ_CONFIG5		0x1c8
+
+#endif
-- 
2.34.1