[PATCH v4 0/7] pressure: bmp280: Minor cleanup and interrupt support

From: Vasileios Amoiridis
Date: Wed Aug 28 2024 - 16:53:02 EST


Depends on this: https://lore.kernel.org/linux-iio/20240823172017.9028-1-vassilisamir@xxxxxxxxx

Changes in v4:

[PATCH v4 1/7]:
- Use better names and split value assignments for better readability.

[PATCH v4 2/7]:
- Move to fsleep() and add comment on top
- Use appropriate return error value in bmp280_preinit()

[PATCH v4 3/7]:
- Split lines for logical and better readability

[PATCH v4 4/7]:
- Change style in static const array assignments
- Use BIT() function instead of bit shifting
- Change usleep_range() to fsleep() and add comments

[PATCH v4 5/7]:
- Add allOf:if in order to allow the interrupt in the device-tree
only in sensors who support it.

[PATCH v4 6/7]:
- Change function pointer return type to irq_handler_t
- Remove extra check in dev_fwnode()
- Fix check in fwnode_irq_get()
- Fix shadowed error check
- Remove extra check in irq_get_irq_data(irq);
- Improve indentation
- Fix return values in certain cases
- Fix identation and if checks

[PATCH v4 7/7]:
- Fix commit message

Vasileios Amoiridis (7):
iio: pressure: bmp280: Use bulk read for humidity calibration data
iio: pressure: bmp280: Add support for bmp280 soft reset
iio: pressure: bmp280: Remove config error check for IIR filter
updates
iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and
BMP5xx devices
iio: pressure: bmp280: Add data ready trigger support
iio: pressure: bmp280: Move bmp085 interrupt to new configuration

.../bindings/iio/pressure/bmp085.yaml | 22 +-
drivers/iio/pressure/bmp280-core.c | 692 +++++++++++++++---
drivers/iio/pressure/bmp280-i2c.c | 4 +-
drivers/iio/pressure/bmp280-spi.c | 4 +-
drivers/iio/pressure/bmp280.h | 52 ++
5 files changed, 684 insertions(+), 90 deletions(-)


base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95
prerequisite-patch-id: e4f81f31f4fbb2aa872c0c74ed4511893eee0c9a
--
2.25.1