Re: [PATCH v2] arm64: dts: ti: k3-am642-sr-som: mux ethernet phy reset signals input

[Nishanth Menon]

On 11:52-20240903, Josua Mayer wrote:
> Specifically on AM64 SoM design, the DP83869 phys have a chance to lock
> up if reset gpio changes state. Update the pinmux to input-only,
> strongly enforcing that these signals are left floating at all times.
> 
> This avoids sporadic phy initialisation errors mostly encountered during
> power-on and reset. In this state the phys respond to all mdio messages
> with a constant response, recovering only after power-cycle.
> 
> Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
> ---
> Changes in v2:
> - update commit message with additional details
> - rebased on v6.11-rc1
> - Link to v1: https://lore.kernel.org/r/20240704-am64-phy-lockup-v1-1-4a38ded44f9d@xxxxxxxxxxxxx
> ---
>  arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> index c19d0b8bbf0f..b1f06071df4c 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
> @@ -320,7 +320,7 @@ AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* EXTINTn.GPIO1_70 */
>  	ethernet_phy0_default_pins: ethernet-phy0-default-pins {
>  		pinctrl-single,pins = <
>  			/* reset */
> -			AM64X_IOPAD(0x0154, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO19.GPIO0_84 */
> +			AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* PRG1_PRU1_GPO19.GPIO0_84 */
>  			/* reference clock */
>  			AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* EXT_REFCLK1.CLKOUT0 */
>  		>;
> @@ -329,7 +329,7 @@ AM64X_IOPAD(0x0274, PIN_OUTPUT, 5) /* EXT_REFCLK1.CLKOUT0 */
>  	ethernet_phy1_default_pins: ethernet-phy1-default-pins {
>  		pinctrl-single,pins = <
>  			/* reset */
> -			AM64X_IOPAD(0x0150, PIN_OUTPUT, 7) /* PRG1_PRU1_GPO18.GPIO0_20 */
> +			AM64X_IOPAD(0x0150, PIN_INPUT, 7) /* PRG1_PRU1_GPO18.GPIO0_20 */
>  			/* led0, external pull-down on SoM */
>  			AM64X_IOPAD(0x0128, PIN_INPUT, 7) /* PRG1_PRU1_GPO8.GPIO0_73 */
>  			/* led1/rxer */
> @@ -340,7 +340,7 @@ AM64X_IOPAD(0x011c, PIN_INPUT, 7) /* PRG1_PRU1_GPO5.GPIO0_70 */
>  	ethernet_phy2_default_pins: ethernet-phy2-default-pins {
>  		pinctrl-single,pins = <
>  			/* reset */
> -			AM64X_IOPAD(0x00d4, PIN_OUTPUT, 7) /* PRG1_PRU0_GPO7.GPIO0_52 */
> +			AM64X_IOPAD(0x00d4, PIN_INPUT, 7) /* PRG1_PRU0_GPO7.GPIO0_52 */

PIN_INPUT is bi-directional despite what the name states. Either way, it
is a bit late for me to pick things up.

>  			/* led0, external pull-down on SoM */
>  			AM64X_IOPAD(0x00d8, PIN_INPUT, 7) /* PRG1_PRU0_GPO8.GPIO0_53 */
>  			/* led1/rxer */
> 
> ---
> base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b
> change-id: 20240704-am64-phy-lockup-107ea5ffa228
> 
> Best regards,
> -- 
> Josua Mayer <josua@xxxxxxxxxxxxx>
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D