Re: [PATCH 3/9] dt-bindings: media: Add amlogic,c3-mipi-adapter.yaml

[Krzysztof Kozlowski]

On 03/09/2024 08:57, Keke Li via B4 Relay wrote:
> From: Keke Li <keke.li@xxxxxxxxxxx>
> 
> c3-mipi-adapter is used to organize mipi data and
> send raw data to ISP module.
> 
> Signed-off-by: Keke Li <keke.li@xxxxxxxxxxx>
> ---
>  .../bindings/media/amlogic,c3-mipi-adapter.yaml    | 114 +++++++++++++++++++++
>  1 file changed, 114 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
> new file mode 100644
> index 000000000000..e1873fe829c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-adapter.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic C3 MIPI adapter receiver
> +
> +maintainers:
> +  - Keke Li <keke.li@xxxxxxxxxxx>
> +
> +description: |-

Same comment.

> +  MIPI adapter is used to convert the MIPI CSI-2 data
> +  into an ISP supported data format.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,c3-mipi-adapter
> +
> +  reg:
> +    minItems: 3

Same comment.

> +    maxItems: 3
> +
> +  reg-names:
> +    items:
> +      - const: adap_top
> +      - const: adap_fd
> +      - const: adap_rd

Same comment.

> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2

Same comment.

> +
> +  clock-names:
> +    items:
> +      - const: vapb
> +      - const: adap
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: input port node.
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: output port node.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - power-domains
> +  - clocks
> +  - clock-names
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
> +    #include <dt-bindings/power/amlogic,c3-pwrc.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        adap: adap@ff010000 {
> +            compatible = "amlogic,c3-mipi-adapter";
> +

Same comments.



Best regards,
Krzysztof