Re: [PATCH v2 2/3] input: touchscreen: ad7877: add dt support

[Dmitry Torokhov]

Hi Antoniu,

On Mon, Sep 02, 2024 at 11:24:32AM +0300, Antoniu Miclaus wrote:
> Add devicetree support within the driver.
> 
> Make the old platform data approach optional.

Nobody is using it, so simply remove it.

> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---
> new in v2.
>  drivers/input/touchscreen/ad7877.c | 68 +++++++++++++++++++++++++++++-
>  1 file changed, 66 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
> index 7886454a19c6..3fa38043b561 100644
> --- a/drivers/input/touchscreen/ad7877.c
> +++ b/drivers/input/touchscreen/ad7877.c
> @@ -27,6 +27,7 @@
>  #include <linux/input.h>
>  #include <linux/interrupt.h>
>  #include <linux/pm.h>
> +#include <linux/property.h>
>  #include <linux/slab.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spi/ad7877.h>
> @@ -667,6 +668,68 @@ static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts)
>  	}
>  }
>  
> +static struct ad7877_platform_data *ad7877_parse_props(struct device *dev)
> +{
> +	struct ad7877_platform_data *pdata;
> +	u32 value, average;
> +
> +	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata)
> +		return ERR_PTR(-ENOMEM);
> +
> +	pdata->model = (uintptr_t)device_get_match_data(dev);
> +
> +	device_property_read_u8(dev, "adi,stopacq-polarity",
> +				&pdata->stopacq_polarity);
> +	device_property_read_u8(dev, "adi,first-conv-delay",
> +				&pdata->first_conversion_delay);
> +	device_property_read_u8(dev, "adi,pen-down-acc-interval",
> +				&pdata->pen_down_acc_interval);
> +	device_property_read_u8(dev, "adi,acquisition-time",
> +				&pdata->acquisition_time);
> +
> +	device_property_read_u16(dev, "adi,vref-delay-usecs",
> +				 &pdata->vref_delay_usecs);
> +
> +	device_property_read_u32(dev, "touchscreen-x-plate-ohms", &value);
> +	pdata->x_plate_ohms = (u16)value;
> +	device_property_read_u32(dev, "touchscreen-y-plate-ohms", &value);
> +	pdata->y_plate_ohms = (u16)value;
> +	device_property_read_u32(dev, "touchscreen-min-x", &value);
> +	pdata->x_min = (u16)value;
> +	device_property_read_u32(dev, "touchscreen-min-y", &value);
> +	pdata->y_min = (u16)value;
> +	device_property_read_u32(dev, "touchscreen-max-x", &value);
> +	pdata->x_max = (u16)value;
> +	device_property_read_u32(dev, "touchscreen-max-y", &value);
> +	pdata->y_max = (u16)value;
> +	device_property_read_u32(dev, "touchscreen-max-pressure", &value);
> +	pdata->pressure_max = (u16)value;
> +	device_property_read_u32(dev, "touchscreen-min-pressure", &value);
> +	pdata->pressure_min = (u16)value;

Please use touchscreen_parse_properties() and also apply transformations
via touchscreen_report_pos() instead of rolling your own logic.

Thanks.

-- 
Dmitry