[PATCH net-next v30 12/13] realtek: Update the Makefile and Kconfig in the realtek folder

[Justin Lai]

1. Add the RTASE entry in the Kconfig.
2. Add the CONFIG_RTASE entry in the Makefile.

Signed-off-by: Justin Lai <justinlai0215@xxxxxxxxxxx>
---
 drivers/net/ethernet/realtek/Kconfig  | 19 +++++++++++++++++++
 drivers/net/ethernet/realtek/Makefile |  1 +
 2 files changed, 20 insertions(+)

diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 03015b665f4e..8a8ea51c639e 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -120,4 +120,23 @@ config R8169_LEDS
 	  Optional support for controlling the NIC LED's with the netdev
 	  LED trigger.
 
+config RTASE
+	tristate "Realtek Automotive Switch 9054/9068/9072/9075/9068/9071 PCIe Interface support"
+	depends on PCI
+	select CRC32
+	select PAGE_POOL
+	help
+	  Say Y here and it will be compiled and linked with the kernel
+	  if you have a Realtek Ethernet adapter belonging to the
+	  following families:
+	  RTL9054 5GBit Ethernet
+	  RTL9068 5GBit Ethernet
+	  RTL9072 5GBit Ethernet
+	  RTL9075 5GBit Ethernet
+	  RTL9068 5GBit Ethernet
+	  RTL9071 5GBit Ethernet
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rtase. This is recommended.
+
 endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index 635491d8826e..046adf503ff4 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ATP) += atp.o
 r8169-y += r8169_main.o r8169_firmware.o r8169_phy_config.o
 r8169-$(CONFIG_R8169_LEDS) += r8169_leds.o
 obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_RTASE) += rtase/
-- 
2.34.1