Re: [PATCH v1 1/1] platform/x86: x86-android-tablets: Fix spelling in the comments

From: Hans de Goede
Date: Wed Sep 04 2024 - 14:22:29 EST

Next message: Krzysztof Kozlowski: "Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P"
Previous message: Dmitry Torokhov: "Re: [PATCH 12/22] Input: iqs269a - use guard notation when acquiring mutex"
In reply to: Andy Shevchenko: "[PATCH v1 1/1] platform/x86: x86-android-tablets: Fix spelling in the comments"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On 9/2/24 5:06 PM, Andy Shevchenko wrote:
> Fix spelling across comments (besides obvious grammar issues):
> - spell words in full, e.g., 'img' --> 'image'
> - refer to 'gpio-keys' consistently
> - refer to acpi_power_off() clearly as to function
> - make sure that the first line is only for the affected model(s)
> - miscellaneous improvements
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans

> ---
> .../platform/x86/x86-android-tablets/Kconfig | 2 +-
> .../platform/x86/x86-android-tablets/asus.c | 8 ++---
> .../platform/x86/x86-android-tablets/core.c | 20 ++++++-------
> .../platform/x86/x86-android-tablets/dmi.c | 11 +++----
> .../platform/x86/x86-android-tablets/lenovo.c | 22 +++++++-------
> .../platform/x86/x86-android-tablets/other.c | 30 +++++++++----------
> .../x86/x86-android-tablets/shared-psy-info.c | 4 +--
> .../x86-android-tablets/x86-android-tablets.h | 2 +-
> 8 files changed, 50 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/platform/x86/x86-android-tablets/Kconfig b/drivers/platform/x86/x86-android-tablets/Kconfig
> index b591419de80c..88d9e8f2ff24 100644
> --- a/drivers/platform/x86/x86-android-tablets/Kconfig
> +++ b/drivers/platform/x86/x86-android-tablets/Kconfig
> @@ -20,4 +20,4 @@ config X86_ANDROID_TABLETS
> are missing from the DSDT.
>
> If you have a x86 Android tablet say Y or M here, for a generic x86
> - distro config say M here.
> + distro configuration say M here.
> diff --git a/drivers/platform/x86/x86-android-tablets/asus.c b/drivers/platform/x86/x86-android-tablets/asus.c
> index 227afbb51078..07fbeab2319a 100644
> --- a/drivers/platform/x86/x86-android-tablets/asus.c
> +++ b/drivers/platform/x86/x86-android-tablets/asus.c
> @@ -37,7 +37,7 @@ static const struct x86_gpio_button asus_me176c_tf103c_lid __initconst = {
> .pin = 12,
> };
>
> -/* Asus ME176C tablets have an Android factory img with everything hardcoded */
> +/* Asus ME176C tablets have an Android factory image with everything hardcoded */
> static const char * const asus_me176c_accel_mount_matrix[] = {
> "-1", "0", "0",
> "0", "1", "0",
> @@ -112,7 +112,7 @@ static const struct x86_i2c_client_info asus_me176c_i2c_clients[] __initconst =
> },
> .adapter_path = "\\_SB_.I2C5",
> }, {
> - /* kxtj21009 accel */
> + /* kxtj21009 accelerometer */
> .board_info = {
> .type = "kxtj21009",
> .addr = 0x0f,
> @@ -181,7 +181,7 @@ const struct x86_dev_info asus_me176c_info __initconst = {
> .modules = bq24190_modules,
> };
>
> -/* Asus TF103C tablets have an Android factory img with everything hardcoded */
> +/* Asus TF103C tablets have an Android factory image with everything hardcoded */
> static const char * const asus_tf103c_accel_mount_matrix[] = {
> "0", "-1", "0",
> "-1", "0", "0",
> @@ -280,7 +280,7 @@ static const struct x86_i2c_client_info asus_tf103c_i2c_clients[] __initconst =
> },
> .adapter_path = "\\_SB_.I2C5",
> }, {
> - /* kxtj21009 accel */
> + /* kxtj21009 accelerometer */
> .board_info = {
> .type = "kxtj21009",
> .addr = 0x0f,
> diff --git a/drivers/platform/x86/x86-android-tablets/core.c b/drivers/platform/x86/x86-android-tablets/core.c
> index 919ef4471229..1427a9a39008 100644
> --- a/drivers/platform/x86/x86-android-tablets/core.c
> +++ b/drivers/platform/x86/x86-android-tablets/core.c
> @@ -26,19 +26,19 @@
> static struct platform_device *x86_android_tablet_device;
>
> /*
> - * This helper allows getting a gpio_desc *before* the actual device consuming
> - * the GPIO has been instantiated. This function _must_ only be used to handle
> - * this special case such as e.g. :
> + * This helper allows getting a GPIO descriptor *before* the actual device
> + * consuming it has been instantiated. This function MUST only be used to
> + * handle this special case such as, e.g.:
> *
> * 1. Getting an IRQ from a GPIO for i2c_board_info.irq which is passed to
> * i2c_client_new() to instantiate i2c_client-s; or
> - * 2. Calling desc_to_gpio() to get an old style GPIO number for gpio_keys
> + * 2. Calling desc_to_gpio() to get an old style GPIO number for gpio-keys
> * platform_data which still uses old style GPIO numbers.
> *
> - * Since the consuming device has not been instatiated yet a dynamic lookup
> - * is generated using the special x86_android_tablet dev for dev_id.
> + * Since the consuming device has not been instantiated yet a dynamic lookup
> + * is generated using the special x86_android_tablet device for dev_id.
> *
> - * For normal GPIO lookups a standard static gpiod_lookup_table _must_ be used.
> + * For normal GPIO lookups a standard static struct gpiod_lookup_table MUST be used.
> */
> int x86_android_tablet_get_gpiod(const char *chip, int pin, const char *con_id,
> bool active_low, enum gpiod_flags dflags,
> @@ -87,7 +87,7 @@ int x86_acpi_irq_helper_get(const struct x86_acpi_irq_data *data)
> /*
> * The DSDT may already reference the GSI in a device skipped by
> * acpi_quirk_skip_i2c_client_enumeration(). Unregister the GSI
> - * to avoid EBUSY errors in this case.
> + * to avoid -EBUSY errors in this case.
> */
> acpi_unregister_gsi(data->index);
> irq = acpi_register_gsi(NULL, data->index, data->trigger, data->polarity);
> @@ -379,7 +379,7 @@ static __init int x86_android_tablet_probe(struct platform_device *pdev)
> }
> }
>
> - /* + 1 to make space for (optional) gpio_keys_button pdev */
> + /* + 1 to make space for the (optional) gpio_keys_button platform device */
> pdevs = kcalloc(dev_info->pdev_count + 1, sizeof(*pdevs), GFP_KERNEL);
> if (!pdevs) {
> x86_android_tablet_remove(pdev);
> @@ -432,7 +432,7 @@ static __init int x86_android_tablet_probe(struct platform_device *pdev)
>
> buttons[i] = dev_info->gpio_button[i].button;
> buttons[i].gpio = desc_to_gpio(gpiod);
> - /* Release gpiod so that gpio-keys can request it */
> + /* Release GPIO descriptor so that gpio-keys can request it */
> devm_gpiod_put(&x86_android_tablet_device->dev, gpiod);
> }
>
> diff --git a/drivers/platform/x86/x86-android-tablets/dmi.c b/drivers/platform/x86/x86-android-tablets/dmi.c
> index 387dd092c4dd..034f97a8ff27 100644
> --- a/drivers/platform/x86/x86-android-tablets/dmi.c
> +++ b/drivers/platform/x86/x86-android-tablets/dmi.c
> @@ -99,14 +99,15 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
> {
> /* Lenovo Yoga Book X91F / X91L */
> .matches = {
> - /* Non exact match to match F + L versions */
> + /* Inexact match to match F + L versions */
> DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"),
> },
> .driver_data = (void *)&lenovo_yogabook_x91_info,
> },
> {
> /*
> - * Lenovo Yoga Tablet 2 Pro 1380F/L (13") This has more or less
> + * Lenovo Yoga Tablet 2 Pro 1380F/L (13")
> + * This has more or less
> * the same BIOS as the 830F/L or 1050F/L (8" and 10") below,
> * but unlike the 8" / 10" models which share the same mainboard
> * this model has a different mainboard.
> @@ -124,8 +125,8 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
> },
> {
> /*
> - * Lenovo Yoga Tablet 2 830F/L or 1050F/L (The 8" and 10"
> - * Lenovo Yoga Tablet 2 use the same mainboard)
> + * Lenovo Yoga Tablet 2 830F/L or 1050F/L
> + * The 8" and 10" * Lenovo Yoga Tablet 2 use the same mainboard.
> */
> .matches = {
> DMI_MATCH(DMI_SYS_VENDOR, "Intel Corp."),
> @@ -163,7 +164,7 @@ const struct dmi_system_id x86_android_tablet_ids[] __initconst = {
> .driver_data = (void *)&nextbook_ares8_info,
> },
> {
> - /* Nextbook Ares 8A (CHT version)*/
> + /* Nextbook Ares 8A (CHT version) */
> .matches = {
> DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
> DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
> diff --git a/drivers/platform/x86/x86-android-tablets/lenovo.c b/drivers/platform/x86/x86-android-tablets/lenovo.c
> index 74f39b658d2c..ae087f1471c1 100644
> --- a/drivers/platform/x86/x86-android-tablets/lenovo.c
> +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c
> @@ -59,7 +59,7 @@ static struct lp855x_platform_data lenovo_lp8557_reg_only_pdata = {
> .initial_brightness = 128,
> };
>
> -/* Lenovo Yoga Book X90F / X90L's Android factory img has everything hardcoded */
> +/* Lenovo Yoga Book X90F / X90L's Android factory image has everything hardcoded */
>
> static const struct property_entry lenovo_yb1_x90_wacom_props[] = {
> PROPERTY_ENTRY_U32("hid-descr-addr", 0x0001),
> @@ -262,7 +262,7 @@ const struct x86_dev_info lenovo_yogabook_x90_info __initconst = {
> .init = lenovo_yb1_x90_init,
> };
>
> -/* Lenovo Yoga Book X91F/L Windows tablet needs manual instantiation of the fg client */
> +/* Lenovo Yoga Book X91F/L Windows tablet needs manual instantiation of the fuel-gauge client */
> static const struct x86_i2c_client_info lenovo_yogabook_x91_i2c_clients[] __initconst = {
> {
> /* BQ27542 fuel-gauge */
> @@ -281,7 +281,7 @@ const struct x86_dev_info lenovo_yogabook_x91_info __initconst = {
> .i2c_client_count = ARRAY_SIZE(lenovo_yogabook_x91_i2c_clients),
> };
>
> -/* Lenovo Yoga Tablet 2 1050F/L's Android factory img has everything hardcoded */
> +/* Lenovo Yoga Tablet 2 1050F/L's Android factory image has everything hardcoded */
> static const struct property_entry lenovo_yoga_tab2_830_1050_bq24190_props[] = {
> PROPERTY_ENTRY_STRING_ARRAY_LEN("supplied-from", tusb1211_chg_det_psy, 1),
> PROPERTY_ENTRY_REF("monitored-battery", &generic_lipo_hv_4v35_battery_node),
> @@ -521,9 +521,9 @@ static int __init lenovo_yoga_tab2_830_1050_init_codec(void)
> }
>
> /*
> - * These tablet's DSDT does not set acpi_gbl_reduced_hardware, so acpi_power_off
> + * These tablet's DSDT does not set acpi_gbl_reduced_hardware, so acpi_power_off()
> * gets used as pm_power_off handler. This causes "poweroff" on these tablets
> - * to hang hard. Requiring pressing the powerbutton for 30 seconds *twice*
> + * to hang hard. Requiring pressing the power button for 30 seconds *twice*
> * followed by a normal 3 second press to recover. Avoid this by doing an EFI
> * poweroff instead.
> */
> @@ -546,7 +546,7 @@ static int __init lenovo_yoga_tab2_830_1050_init(struct device *dev)
> if (ret)
> return ret;
>
> - /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */
> + /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off() */
> lenovo_yoga_tab2_830_1050_sys_off_handler =
> register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1,
> lenovo_yoga_tab2_830_1050_power_off, NULL);
> @@ -742,7 +742,7 @@ static int __init lenovo_yoga_tab2_1380_init(struct device *dev)
> if (ret)
> return ret;
>
> - /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off */
> + /* SYS_OFF_PRIO_FIRMWARE + 1 so that it runs before acpi_power_off() */
> lenovo_yoga_tab2_830_1050_sys_off_handler =
> register_sys_off_handler(SYS_OFF_MODE_POWER_OFF, SYS_OFF_PRIO_FIRMWARE + 1,
> lenovo_yoga_tab2_830_1050_power_off, NULL);
> @@ -799,7 +799,7 @@ static const struct software_node fg_bq25890_1_supply_node = {
> .properties = fg_bq25890_1_supply_props,
> };
>
> -/* bq25892 charger settings for the flat lipo battery behind the screen */
> +/* bq25892 charger settings for the flat LiPo battery behind the screen */
> static const struct property_entry lenovo_yt3_bq25892_0_props[] = {
> PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_0_suppliers),
> PROPERTY_ENTRY_U32("linux,iinlim-percentage", 40),
> @@ -833,7 +833,7 @@ static const struct software_node lenovo_yt3_hideep_ts_node = {
>
> static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = {
> {
> - /* bq27500 fuel-gauge for the flat lipo battery behind the screen */
> + /* bq27500 fuel-gauge for the flat LiPo battery behind the screen */
> .board_info = {
> .type = "bq27500",
> .addr = 0x55,
> @@ -842,7 +842,7 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = {
> },
> .adapter_path = "\\_SB_.PCI0.I2C1",
> }, {
> - /* bq25892 charger for the flat lipo battery behind the screen */
> + /* bq25892 charger for the flat LiPo battery behind the screen */
> .board_info = {
> .type = "bq25892",
> .addr = 0x6b,
> @@ -859,7 +859,7 @@ static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = {
> .con_id = "bq25892_0_irq",
> },
> }, {
> - /* bq27500 fuel-gauge for the round li-ion cells in the hinge */
> + /* bq27500 fuel-gauge for the round Li-ion cells in the hinge */
> .board_info = {
> .type = "bq27500",
> .addr = 0x55,
> diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
> index eb0e55c69dfe..aad7114c43c3 100644
> --- a/drivers/platform/x86/x86-android-tablets/other.c
> +++ b/drivers/platform/x86/x86-android-tablets/other.c
> @@ -20,7 +20,7 @@
> #include "shared-psy-info.h"
> #include "x86-android-tablets.h"
>
> -/* Acer Iconia One 7 B1-750 has an Android factory img with everything hardcoded */
> +/* Acer Iconia One 7 B1-750 has an Android factory image with everything hardcoded */
> static const char * const acer_b1_750_mount_matrix[] = {
> "-1", "0", "0",
> "0", "1", "0",
> @@ -98,7 +98,7 @@ const struct x86_dev_info acer_b1_750_info __initconst = {
> * Advantech MICA-071
> * This is a standard Windows tablet, but it has an extra "quick launch" button
> * which is not described in the ACPI tables in anyway.
> - * Use the x86-android-tablets infra to create a gpio-button device for this.
> + * Use the x86-android-tablets infra to create a gpio-keys device for this.
> */
> static const struct x86_gpio_button advantech_mica_071_button __initconst = {
> .button = {
> @@ -209,7 +209,7 @@ const struct x86_dev_info chuwi_hi8_info __initconst = {
> * This comes in both Windows and Android versions and even on Android
> * the DSDT is mostly sane. This tablet has 2 extra general purpose buttons
> * in the button row with the power + volume-buttons labeled P and F.
> - * Use the x86-android-tablets infra to create a gpio-button device for these.
> + * Use the x86-android-tablets infra to create a gpio-keys device for these.
> */
> static const struct x86_gpio_button cyberbook_t116_buttons[] __initconst = {
> {
> @@ -276,7 +276,7 @@ const struct x86_dev_info czc_p10t __initconst = {
> .init = czc_p10t_init,
> };
>
> -/* Medion Lifetab S10346 tablets have an Android factory img with everything hardcoded */
> +/* Medion Lifetab S10346 tablets have an Android factory image with everything hardcoded */
> static const char * const medion_lifetab_s10346_accel_mount_matrix[] = {
> "0", "1", "0",
> "1", "0", "0",
> @@ -305,7 +305,7 @@ static const struct software_node medion_lifetab_s10346_touchscreen_node = {
>
> static const struct x86_i2c_client_info medion_lifetab_s10346_i2c_clients[] __initconst = {
> {
> - /* kxtj21009 accel */
> + /* kxtj21009 accelerometer */
> .board_info = {
> .type = "kxtj21009",
> .addr = 0x0f,
> @@ -359,7 +359,7 @@ const struct x86_dev_info medion_lifetab_s10346_info __initconst = {
> .gpiod_lookup_tables = medion_lifetab_s10346_gpios,
> };
>
> -/* Nextbook Ares 8 (BYT) tablets have an Android factory img with everything hardcoded */
> +/* Nextbook Ares 8 (BYT) tablets have an Android factory image with everything hardcoded */
> static const char * const nextbook_ares8_accel_mount_matrix[] = {
> "0", "-1", "0",
> "-1", "0", "0",
> @@ -387,7 +387,7 @@ static const struct software_node nextbook_ares8_touchscreen_node = {
>
> static const struct x86_i2c_client_info nextbook_ares8_i2c_clients[] __initconst = {
> {
> - /* Freescale MMA8653FC accel */
> + /* Freescale MMA8653FC accelerometer */
> .board_info = {
> .type = "mma8653",
> .addr = 0x1d,
> @@ -428,7 +428,7 @@ const struct x86_dev_info nextbook_ares8_info __initconst = {
> .gpiod_lookup_tables = nextbook_ares8_gpios,
> };
>
> -/* Nextbook Ares 8A (CHT) tablets have an Android factory img with everything hardcoded */
> +/* Nextbook Ares 8A (CHT) tablets have an Android factory image with everything hardcoded */
> static const char * const nextbook_ares8a_accel_mount_matrix[] = {
> "1", "0", "0",
> "0", "-1", "0",
> @@ -446,7 +446,7 @@ static const struct software_node nextbook_ares8a_accel_node = {
>
> static const struct x86_i2c_client_info nextbook_ares8a_i2c_clients[] __initconst = {
> {
> - /* Freescale MMA8653FC accel */
> + /* Freescale MMA8653FC accelerometer */
> .board_info = {
> .type = "mma8653",
> .addr = 0x1d,
> @@ -497,7 +497,7 @@ const struct x86_dev_info nextbook_ares8a_info __initconst = {
> * Peaq C1010
> * This is a standard Windows tablet, but it has a special Dolby button.
> * This button has a WMI interface, but that is broken. Instead of trying to
> - * use the broken WMI interface, instantiate a gpio_keys device for this.
> + * use the broken WMI interface, instantiate a gpio-keys device for this.
> */
> static const struct x86_gpio_button peaq_c1010_button __initconst = {
> .button = {
> @@ -521,7 +521,7 @@ const struct x86_dev_info peaq_c1010_info __initconst = {
> * Whitelabel (sold as various brands) TM800A550L tablets.
> * These tablet's DSDT contains a whole bunch of bogus ACPI I2C devices
> * (removed through acpi_quirk_skip_i2c_client_enumeration()) and
> - * the touchscreen fwnode has the wrong GPIOs.
> + * the touchscreen firmware node has the wrong GPIOs.
> */
> static const char * const whitelabel_tm800a550l_accel_mount_matrix[] = {
> "-1", "0", "0",
> @@ -566,7 +566,7 @@ static const struct x86_i2c_client_info whitelabel_tm800a550l_i2c_clients[] __in
> .polarity = ACPI_ACTIVE_HIGH,
> },
> }, {
> - /* kxcj91008 accel */
> + /* kxcj91008 accelerometer */
> .board_info = {
> .type = "kxcj91008",
> .addr = 0x0f,
> @@ -598,12 +598,12 @@ const struct x86_dev_info whitelabel_tm800a550l_info __initconst = {
> };
>
> /*
> - * The fwnode for ktd2026 on Xaomi pad2. It composed of a RGB LED node
> + * The firmware node for ktd2026 on Xaomi pad2. It composed of a RGB LED node
> * with three subnodes for each color (B/G/R). The RGB LED node is named
> * "multi-led" to align with the name in the device tree.
> */
>
> -/* main fwnode for ktd2026 */
> +/* Main firmware node for ktd2026 */
> static const struct software_node ktd2026_node = {
> .name = "ktd2026",
> };
> @@ -665,7 +665,7 @@ static const struct software_node *ktd2026_node_group[] = {
> };
>
> /*
> - * For the LEDs which backlight the menu / home / back capacitive buttons on
> + * For the LEDs which backlight the Menu / Home / Back capacitive buttons on
> * the bottom bezel. These are attached to a TPS61158 LED controller which
> * is controlled by the "pwm_soc_lpss_2" PWM output.
> */
> diff --git a/drivers/platform/x86/x86-android-tablets/shared-psy-info.c b/drivers/platform/x86/x86-android-tablets/shared-psy-info.c
> index d2d0aa51bc3f..a46fa15acfb1 100644
> --- a/drivers/platform/x86/x86-android-tablets/shared-psy-info.c
> +++ b/drivers/platform/x86/x86-android-tablets/shared-psy-info.c
> @@ -39,7 +39,7 @@ const struct software_node fg_bq25890_supply_node = {
> .properties = fg_bq25890_supply_props,
> };
>
> -/* LiPo HighVoltage (max 4.35V) settings used by most devs with a HV bat. */
> +/* LiPo HighVoltage (max 4.35V) settings used by most devs with a HV battery */
> static const struct property_entry generic_lipo_hv_4v35_battery_props[] = {
> PROPERTY_ENTRY_STRING("compatible", "simple-battery"),
> PROPERTY_ENTRY_STRING("device-chemistry", "lithium-ion"),
> @@ -80,7 +80,7 @@ const char * const bq24190_modules[] __initconst = {
> NULL
> };
>
> -/* Generic pdevs array and gpio-lookups for micro USB ID pin handling */
> +/* Generic platform device array and GPIO lookup table for micro USB ID pin handling */
> const struct platform_device_info int3496_pdevs[] __initconst = {
> {
> /* For micro USB ID pin handling */
> diff --git a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
> index 86402b9b46a3..5517e438c7b6 100644
> --- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
> +++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h
> @@ -61,7 +61,7 @@ struct x86_serdev_info {
> const char *ctrl_uid;
> const char *ctrl_devname;
> /*
> - * ATM the serdev core only supports of or ACPI matching; and sofar all
> + * ATM the serdev core only supports of or ACPI matching; and so far all
> * Android x86 tablets DSDTs have usable serdev nodes, but sometimes
> * under the wrong controller. So we just tie the existing serdev ACPI
> * node to the right controller.

Next message: Krzysztof Kozlowski: "Re: [PATCH 3/3] interconnect: qcom: Add EPSS L3 support on SA8775P"
Previous message: Dmitry Torokhov: "Re: [PATCH 12/22] Input: iqs269a - use guard notation when acquiring mutex"
In reply to: Andy Shevchenko: "[PATCH v1 1/1] platform/x86: x86-android-tablets: Fix spelling in the comments"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]