Re: [PATCH v4 0/3] iio: adc: add new ad7625 driver

[Trevor Gamblin]

On 2024-09-04 3:14 p.m., Trevor Gamblin wrote:
> This series adds a new driver for the Analog Devices Inc. AD7625,
> AD7626, AD7960, and AD7961. These chips are part of a family of
> LVDS-based SAR ADCs. The initial driver implementation does not support
> the devices' self-clocked mode, although that can be added later.
>
> The devices make use of two offset PWM signals, one to trigger
> conversions and the other as a burst signal for transferring data to the
> host. These rely on the new PWM waveform functionality being
> reviewed in [1] and also available at [2].
>
> This work is being done by BayLibre and on behalf of Analog Devices
> Inc., hence the maintainers are @analog.com.
>
> Special thanks to David Lechner for his guidance and reviews.
>
> [1]: https://lore.kernel.org/linux-pwm/cover.1722261050.git.u.kleine-koenig@xxxxxxxxxxxx
> [2]: https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git/log/?h=pwm/chardev
>
> Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
Realizing that I forgot to pick up Conor's Reviewed-by on the v3 binding 
before sending. Can that be picked up?
> ---
> Changes in v4:
> - Link to v3: https://lore.kernel.org/r/20240819-ad7625_r1-v3-0-75d5217c76b5@xxxxxxxxxxxx
> - Rebase on top of latest pwm/chardev branch at:
>    https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git/log/?h=pwm/chardev
>
>    [PATCH 1/3]
>    - No change
>
>    [PATCH 2/3]
>    - Add 'depends on PWM' under 'CONFIG AD7625' in
>      drivers/iio/adc/Kconfig, based on v3 discussions
>    - Cleanup whitespace usage in Kconfig, bandwidth logic to match
>      Jonathan's suggestions
>
>    [PATCH 3/3]
>    - No change
>
> Changes in v3:
> - Link to v2: https://lore.kernel.org/r/20240809-ad7625_r1-v2-0-f85e7ac83150@xxxxxxxxxxxx
>    
>    [PATCH 1/3]
>    - Add gpio bindings header, en0-gpios and en1-gpios to binding example
>    - Remove unnecessary comments
>
>    [PATCH 2/3]
>    - No change
>
>    [PATCH 3/3]
>    - No change
>
> Changes in v2:
> - Link to v1 (marked as RFC): https://lore.kernel.org/r/20240731-ad7625_r1-v1-0-a1efef5a2ab9@xxxxxxxxxxxx
> - Include link to required PWM patch series in cover letter (missing before)
> - Include new link to the pwm/chardev branch of Uwe's kernel tree
>    
>    [PATCH 1/3]
>    - Rework dt bindings to be compliant using make dt_binding_check
>    - Add "adi,no-dco" flag to address indication of how DCO lines are
>      configured
>    - Fix binding patch message
>    - Remove chip packaging info from binding description
>    - Move comments around to be clearer
>
>    [PATCH 2/3]
>    - Remove ad7625_pwm_disable(), call pwm_disable() directly
>    - Add ad7625_buffer_preenable() and ad7625_buffer_postdisable()
>      functions
>    - Add devm_ad7625_regulator_setup() function, move all regulator logic
>      to it, consolidate the comment blocks related to it above
>    - Add have_refin flag in ad7625_state struct
>    - Add pwm_waveform structs to ad7625_state struct for storing
>      requested waveform characteristics
>    - Refactor ad7625_set_sampling_freq() to set the pwm_waveform struct
>      values in ad7625_state, limiting PWM enable/disable to
>      preenable/postdisable functions
>    - Remove redundant dev_err_probe() after devm_ad7625_pwm_get()
>    - Use device_property_read_bool() instead of device_property_present()
>    - General alignment and line wrapping fixes
>
>    [PATCH 3/3]
>    - No change
>
> ---
> Trevor Gamblin (3):
>        dt-bindings: iio: adc: add AD762x/AD796x ADCs
>        iio: adc: ad7625: add driver
>        docs: iio: new docs for ad7625 driver
>
>   .../devicetree/bindings/iio/adc/adi,ad7625.yaml    | 176 ++++++
>   Documentation/iio/ad7625.rst                       |  91 +++
>   MAINTAINERS                                        |  11 +
>   drivers/iio/adc/Kconfig                            |  16 +
>   drivers/iio/adc/Makefile                           |   1 +
>   drivers/iio/adc/ad7625.c                           | 684 +++++++++++++++++++++
>   6 files changed, 979 insertions(+)
> ---
> base-commit: 1ebd3850421749eb44bd040b249bd4db88d35b33
> change-id: 20240730-ad7625_r1-60d17ea28958
>
> Best regards,