Re: [PATCH 6/8] serial: qcom-geni: fix console corruption

[Doug Anderson]

Hi,

On Mon, Sep 2, 2024 at 8:26 AM Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
>
> +static void qcom_geni_serial_drain_fifo(struct uart_port *uport)
> +{
> +       struct qcom_geni_serial_port *port = to_dev_port(uport);
> +
> +       if (!qcom_geni_serial_main_active(uport))
> +               return;

It seems like all callers already do the check and only ever call you
if the port is active. Do you really need to re-check?


> @@ -308,6 +311,17 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
>         return qcom_geni_serial_poll_bitfield(uport, offset, field, set ? field : 0);
>  }
>
> +static void qcom_geni_serial_drain_fifo(struct uart_port *uport)
> +{
> +       struct qcom_geni_serial_port *port = to_dev_port(uport);
> +
> +       if (!qcom_geni_serial_main_active(uport))
> +               return;
> +
> +       qcom_geni_serial_poll_bitfield(uport, SE_GENI_M_GP_LENGTH, GP_LENGTH,
> +                       port->tx_queued);

nit: indent "port->tx_queued" to match open parenthesis?

...also: as the kernel test robot reported, w/ certain CONFIGs this is
defined / not used.

Aside from the nit / robot issue, this solution looks reasonable to
me. It's been long enough that I've already paged out much of the past
digging I did into this driver, but this seems like it should work.
Feel free to add my Reviewed-by when the robot issue is fixed.



-Doug