[PATCH v4 8/8] iio: adc: ad7606: add support for AD7606C-{16,18} parts
From: Alexandru Ardelean
Date: Thu Sep 05 2024 - 04:26:22 EST
The AD7606C-16 and AD7606C-18 are pretty similar with the AD7606B.
The main difference between AD7606C-16 & AD7606C-18 is the precision in
bits (16 vs 18).
Because of that, some scales need to be defined for the 18-bit variants, as
they need to be computed against 2**18 (vs 2**16 for the 16 bit-variants).
Because the AD7606C-16,18 also supports bipolar & differential channels,
for SW-mode, the default range of 10 V or ±10V should be set at probe.
On reset, the default range (in the registers) is set to value 0x3 which
corresponds to '±10 V single-ended range', regardless of bipolar or
differential configuration.
Aside from the scale/ranges, the AD7606C-16 is similar to the AD7606B.
The AD7606C-18 variant offers 18-bit precision. Because of this, the
requirement to use this chip is that the SPI controller supports padding
of 18-bit sequences to 32-bit arrays.
Datasheet links:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-18.pdf
Signed-off-by: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
---
drivers/iio/adc/ad7606.c | 266 +++++++++++++++++++++++++++++++----
drivers/iio/adc/ad7606.h | 17 ++-
drivers/iio/adc/ad7606_spi.c | 55 ++++++++
3 files changed, 309 insertions(+), 29 deletions(-)
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 4c3fbb28f790..999c4411859e 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -28,14 +28,44 @@
#include "ad7606.h"
+typedef void (*ad7606c_chan_setup_cb_t)(struct ad7606_state *st, int ch,
+ bool bipolar, bool differential);
+
/*
* Scales are computed as 5000/32768 and 10000/32768 respectively,
* so that when applied to the raw values they provide mV values
*/
-static const unsigned int ad7606_scale_avail[2] = {
+static const unsigned int ad7606_16bit_hw_scale_avail[2] = {
152588, 305176
};
+static const unsigned int ad7606_18bit_hw_scale_avail[2] = {
+ 38147, 76294
+};
+
+static const unsigned int ad7606c_16_scale_single_ended_unipolar_avail[3] = {
+ 76294, 152588, 190735,
+};
+
+static const unsigned int ad7606c_16_scale_single_ended_bipolar_avail[5] = {
+ 76294, 152588, 190735, 305176, 381470
+};
+
+static const unsigned int ad7606c_16_scale_differential_bipolar_avail[4] = {
+ 152588, 305176, 381470, 610352
+};
+
+static const unsigned int ad7606c_18_scale_single_ended_unipolar_avail[3] = {
+ 19073, 38147, 47684
+};
+
+static const unsigned int ad7606c_18_scale_single_ended_bipolar_avail[5] = {
+ 19073, 38147, 47684, 76294, 95367
+};
+
+static const unsigned int ad7606c_18_scale_differential_bipolar_avail[4] = {
+ 38147, 76294, 95367, 152588
+};
static const unsigned int ad7616_sw_scale_avail[3] = {
76293, 152588, 305176
@@ -82,11 +112,19 @@ static int ad7606_reg_access(struct iio_dev *indio_dev,
}
}
-static int ad7606_read_samples(struct ad7606_state *st)
+static int ad7606_read_samples(struct ad7606_state *st, bool sign_extend_samples)
{
+ unsigned int storagebits = st->chip_info->channels[1].scan_type.storagebits;
unsigned int num = st->chip_info->num_channels - 1;
- u16 *data = st->data;
- int ret;
+ u32 *data32 = st->data.d32;
+ u16 *data16 = st->data.d16;
+ void *data;
+ int i, ret;
+
+ if (storagebits > 16)
+ data = data32;
+ else
+ data = data16;
/*
* The frstdata signal is set to high while and after reading the sample
@@ -108,11 +146,25 @@ static int ad7606_read_samples(struct ad7606_state *st)
return -EIO;
}
- data++;
+ if (storagebits > 16)
+ data32++;
+ else
+ data16++;
num--;
}
- return st->bops->read_block(st->dev, num, data);
+ ret = st->bops->read_block(st->dev, num, data);
+ if (ret)
+ return ret;
+
+ if (storagebits == 16 || !sign_extend_samples)
+ return 0;
+
+ /* For 18 bit samples, we need to sign-extend samples to 32 bits */
+ for (i = 0; i < num; i++)
+ data32[i] = sign_extend32(data32[i], 17);
+
+ return 0;
}
static irqreturn_t ad7606_trigger_handler(int irq, void *p)
@@ -124,11 +176,11 @@ static irqreturn_t ad7606_trigger_handler(int irq, void *p)
guard(mutex)(&st->lock);
- ret = ad7606_read_samples(st);
+ ret = ad7606_read_samples(st, true);
if (ret)
goto error_ret;
- iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+ iio_push_to_buffers_with_timestamp(indio_dev, st->data.d16,
iio_get_time_ns(indio_dev));
error_ret:
iio_trigger_notify_done(indio_dev->trig);
@@ -142,6 +194,7 @@ static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch,
int *val)
{
struct ad7606_state *st = iio_priv(indio_dev);
+ unsigned int storagebits = st->chip_info->channels[1].scan_type.storagebits;
int ret;
gpiod_set_value(st->gpio_convst, 1);
@@ -152,9 +205,13 @@ static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch,
goto error_ret;
}
- ret = ad7606_read_samples(st);
- if (ret == 0)
- *val = sign_extend32(st->data[ch], 15);
+ ret = ad7606_read_samples(st, false);
+ if (ret == 0) {
+ if (storagebits > 16)
+ *val = sign_extend32(st->data.d32[ch], 17);
+ else
+ *val = sign_extend32(st->data.d16[ch], 15);
+ }
error_ret:
gpiod_set_value(st->gpio_convst, 0);
@@ -267,7 +324,7 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
ch = chan->address;
cs = &st->chan_scales[ch];
i = find_closest(val2, cs->scale_avail, cs->num_scales);
- ret = st->write_scale(indio_dev, ch, i);
+ ret = st->write_scale(indio_dev, ch, i + cs->reg_offset);
if (ret < 0)
return ret;
cs->range = i;
@@ -350,6 +407,18 @@ static const struct iio_chan_spec ad7606_channels_16bit[] = {
AD7606_CHANNEL(7, 16),
};
+static const struct iio_chan_spec ad7606_channels_18bit[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ AD7606_CHANNEL(0, 18),
+ AD7606_CHANNEL(1, 18),
+ AD7606_CHANNEL(2, 18),
+ AD7606_CHANNEL(3, 18),
+ AD7606_CHANNEL(4, 18),
+ AD7606_CHANNEL(5, 18),
+ AD7606_CHANNEL(6, 18),
+ AD7606_CHANNEL(7, 18),
+};
+
/*
* The current assumption that this driver makes for AD7616, is that it's
* working in Hardware Mode with Serial, Burst and Sequencer modes activated.
@@ -410,6 +479,18 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
.oversampling_avail = ad7606_oversampling_avail,
.oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
},
+ [ID_AD7606C_16] = {
+ .channels = ad7606_channels_16bit,
+ .num_channels = 9,
+ .oversampling_avail = ad7606_oversampling_avail,
+ .oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+ },
+ [ID_AD7606C_18] = {
+ .channels = ad7606_channels_18bit,
+ .num_channels = 9,
+ .oversampling_avail = ad7606_oversampling_avail,
+ .oversampling_num = ARRAY_SIZE(ad7606_oversampling_avail),
+ },
[ID_AD7616] = {
.channels = ad7616_channels,
.num_channels = 17,
@@ -581,7 +662,122 @@ static const struct iio_trigger_ops ad7606_trigger_ops = {
.validate_device = iio_trigger_validate_own_device,
};
-static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
+static void ad7606c_18_chan_setup(struct ad7606_state *st, int ch,
+ bool bipolar, bool differential)
+{
+ struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
+ if (differential) {
+ cs->scale_avail =
+ ad7606c_18_scale_differential_bipolar_avail;
+ cs->num_scales =
+ ARRAY_SIZE(ad7606c_18_scale_differential_bipolar_avail);
+ /* Bipolar differential ranges start at 8 (b1000) */
+ cs->reg_offset = 8;
+ cs->range = 1;
+ } else if (bipolar) {
+ cs->scale_avail =
+ ad7606c_18_scale_single_ended_bipolar_avail;
+ cs->num_scales =
+ ARRAY_SIZE(ad7606c_18_scale_single_ended_bipolar_avail);
+ cs->range = 3;
+ } else {
+ cs->scale_avail =
+ ad7606c_18_scale_single_ended_unipolar_avail;
+ cs->num_scales =
+ ARRAY_SIZE(ad7606c_18_scale_single_ended_unipolar_avail);
+ /* Unipolar single-ended ranges start at 5 (b0101) */
+ cs->reg_offset = 5;
+ cs->range = 1;
+ }
+}
+
+static void ad7606c_16_chan_setup(struct ad7606_state *st, int ch,
+ bool bipolar, bool differential)
+{
+ struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
+ if (differential) {
+ cs->scale_avail =
+ ad7606c_16_scale_differential_bipolar_avail;
+ cs->num_scales =
+ ARRAY_SIZE(ad7606c_16_scale_differential_bipolar_avail);
+ /* Bipolar differential ranges start at 8 (b1000) */
+ cs->reg_offset = 8;
+ cs->range = 1;
+ } else if (bipolar) {
+ cs->scale_avail =
+ ad7606c_16_scale_single_ended_bipolar_avail;
+ cs->num_scales =
+ ARRAY_SIZE(ad7606c_16_scale_single_ended_bipolar_avail);
+ cs->range = 3;
+ } else {
+ cs->scale_avail =
+ ad7606c_16_scale_single_ended_unipolar_avail;
+ cs->num_scales =
+ ARRAY_SIZE(ad7606c_16_scale_single_ended_unipolar_avail);
+ /* Unipolar single-ended ranges start at 5 (b0101) */
+ cs->reg_offset = 5;
+ cs->range = 1;
+ }
+}
+
+static int ad7606c_sw_mode_setup_channels(struct iio_dev *indio_dev,
+ ad7606c_chan_setup_cb_t chan_setup_cb)
+{
+ unsigned int num_channels = indio_dev->num_channels - 1;
+ struct ad7606_state *st = iio_priv(indio_dev);
+ bool chan_configured[AD760X_MAX_CHANNELS] = {};
+ struct device *dev = st->dev;
+ int ret;
+ u32 ch;
+
+ /* We need to hook this first */
+ ret = st->bops->sw_mode_config(indio_dev);
+ if (ret)
+ return ret;
+
+ device_for_each_child_node_scoped(dev, child) {
+ bool bipolar, differential;
+ u32 pins[2];
+
+ ret = fwnode_property_read_u32(child, "reg", &ch);
+ if (ret)
+ continue;
+
+ /* channel number (here) is from 1 to num_channels */
+ if (ch == 0 || ch > num_channels) {
+ dev_warn(st->dev,
+ "Invalid channel number (ignoring): %d\n", ch);
+ continue;
+ }
+
+ bipolar = fwnode_property_present(child, "bipolar");
+
+ ret = fwnode_property_read_u32_array(child, "diff-channels",
+ pins, ARRAY_SIZE(pins));
+ /* Channel is differential, if pins are the same as 'reg' */
+ if (ret == 0 && pins[0] == ch && pins[1] == ch)
+ differential = true;
+ else
+ differential = false;
+
+ ch--;
+
+ chan_setup_cb(st, ch, bipolar, differential);
+ chan_configured[ch] = true;
+ }
+
+ /* Apply default configuration to unconfigured (via DT) channels */
+ for (ch = 0; ch < num_channels; ch++) {
+ if (!chan_configured[ch])
+ chan_setup_cb(st, ch, false, false);
+ }
+
+ return 0;
+}
+
+static int ad7606_sw_mode_setup(struct iio_dev *indio_dev, unsigned int id)
{
unsigned int num_channels = indio_dev->num_channels - 1;
struct ad7606_state *st = iio_priv(indio_dev);
@@ -596,17 +792,30 @@ static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
indio_dev->info = &ad7606_info_sw_mode;
- /* Scale of 0.076293 is only available in sw mode */
- /* After reset, in software mode, ±10 V is set by default */
- for (ch = 0; ch < num_channels; ch++) {
- struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+ switch (id) {
+ case ID_AD7606C_18:
+ ret = ad7606c_sw_mode_setup_channels(indio_dev,
+ ad7606c_18_chan_setup);
+ break;
+ case ID_AD7606C_16:
+ ret = ad7606c_sw_mode_setup_channels(indio_dev,
+ ad7606c_16_chan_setup);
+ break;
+ default:
+ /* Scale of 0.076293 is only available in sw mode */
+ /* After reset, in software mode, ±10 V is set by default */
+ for (ch = 0; ch < num_channels; ch++) {
+ struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
+ cs->scale_avail = ad7616_sw_scale_avail;
+ cs->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
+ cs->range = 2;
+ }
- cs->scale_avail = ad7616_sw_scale_avail;
- cs->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
- cs->range = 2;
+ ret = st->bops->sw_mode_config(indio_dev);
+ break;
}
- ret = st->bops->sw_mode_config(indio_dev);
if (ret)
return ret;
@@ -655,9 +864,16 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
st->oversampling = 1;
cs = &st->chan_scales[0];
- cs->range = 0;
- cs->scale_avail = ad7606_scale_avail;
- cs->num_scales = ARRAY_SIZE(ad7606_scale_avail);
+ switch (id) {
+ case ID_AD7606C_18:
+ cs->scale_avail = ad7606_18bit_hw_scale_avail;
+ cs->num_scales = ARRAY_SIZE(ad7606_18bit_hw_scale_avail);
+ break;
+ default:
+ cs->scale_avail = ad7606_16bit_hw_scale_avail;
+ cs->num_scales = ARRAY_SIZE(ad7606_16bit_hw_scale_avail);
+ break;
+ }
ret = devm_regulator_get_enable(dev, "avcc");
if (ret)
@@ -706,7 +922,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
st->write_scale = ad7606_write_scale_hw;
st->write_os = ad7606_write_os_hw;
- ret = ad7606_sw_mode_setup(indio_dev);
+ ret = ad7606_sw_mode_setup(indio_dev, id);
if (ret)
return ret;
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index 2113ad460c0f..6b0897aa2dc7 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -22,7 +22,7 @@
.scan_type = { \
.sign = 's', \
.realbits = (bits), \
- .storagebits = (bits), \
+ .storagebits = (bits) > 16 ? 32 : 16, \
.endianness = IIO_CPU, \
}, \
}
@@ -45,7 +45,7 @@
.scan_type = { \
.sign = 's', \
.realbits = (bits), \
- .storagebits = (bits), \
+ .storagebits = (bits) > 16 ? 32 : 16, \
.endianness = IIO_CPU, \
}, \
}
@@ -88,6 +88,8 @@ struct ad7606_chip_info {
* such that it can be read via the 'read_avail' hook
* @num_scales number of elements stored in the scale_avail array
* @range voltage range selection, selects which scale to apply
+ * @reg_offset offset for the register value, to be applied when
+ * writing the value of 'range' to the register value
*/
struct ad7606_chan_scale {
#define AD760X_MAX_SCALE_SHOW (AD760X_MAX_CHANNELS * 2)
@@ -95,6 +97,7 @@ struct ad7606_chan_scale {
int scale_avail_show[AD760X_MAX_SCALE_SHOW];
unsigned int num_scales;
unsigned int range;
+ unsigned int reg_offset;
};
/**
@@ -151,9 +154,13 @@ struct ad7606_state {
/*
* DMA (thus cache coherency maintenance) may require the
* transfer buffers to live in their own cache lines.
- * 16 * 16-bit samples + 64-bit timestamp
+ * 16 * 16-bit samples + 64-bit timestamp - for AD7616
+ * 8 * 32-bit samples + 64-bit timestamp - for AD7616C-18 (and similar)
*/
- unsigned short data[20] __aligned(IIO_DMA_MINALIGN);
+ union {
+ unsigned short d16[20];
+ unsigned int d32[10];
+ } data __aligned(IIO_DMA_MINALIGN);
__be16 d16[2];
};
@@ -192,6 +199,8 @@ enum ad7606_supported_device_ids {
ID_AD7606_6,
ID_AD7606_4,
ID_AD7606B,
+ ID_AD7606C_16,
+ ID_AD7606C_18,
ID_AD7616,
};
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
index e00f58a6a0e9..b8d630ad156d 100644
--- a/drivers/iio/adc/ad7606_spi.c
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -77,6 +77,18 @@ static const struct iio_chan_spec ad7606b_sw_channels[] = {
AD7606_SW_CHANNEL(7, 16),
};
+static const struct iio_chan_spec ad7606c_18_sw_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ AD7606_SW_CHANNEL(0, 18),
+ AD7606_SW_CHANNEL(1, 18),
+ AD7606_SW_CHANNEL(2, 18),
+ AD7606_SW_CHANNEL(3, 18),
+ AD7606_SW_CHANNEL(4, 18),
+ AD7606_SW_CHANNEL(5, 18),
+ AD7606_SW_CHANNEL(6, 18),
+ AD7606_SW_CHANNEL(7, 18),
+};
+
static const unsigned int ad7606B_oversampling_avail[9] = {
1, 2, 4, 8, 16, 32, 64, 128, 256
};
@@ -120,6 +132,19 @@ static int ad7606_spi_read_block(struct device *dev,
return 0;
}
+static int ad7606_spi_read_block18to32(struct device *dev,
+ int count, void *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer xfer = {
+ .bits_per_word = 18,
+ .len = count,
+ .rx_buf = buf,
+ };
+
+ return spi_sync_transfer(spi, &xfer, 1);
+}
+
static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)
{
struct spi_device *spi = to_spi_device(st->dev);
@@ -283,6 +308,19 @@ static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
return 0;
}
+static int ad7606c_18_sw_mode_config(struct iio_dev *indio_dev)
+{
+ int ret;
+
+ ret = ad7606B_sw_mode_config(indio_dev);
+ if (ret)
+ return ret;
+
+ indio_dev->channels = ad7606c_18_sw_channels;
+
+ return 0;
+}
+
static const struct ad7606_bus_ops ad7606_spi_bops = {
.read_block = ad7606_spi_read_block,
};
@@ -305,6 +343,15 @@ static const struct ad7606_bus_ops ad7606B_spi_bops = {
.sw_mode_config = ad7606B_sw_mode_config,
};
+static const struct ad7606_bus_ops ad7606c_18_spi_bops = {
+ .read_block = ad7606_spi_read_block18to32,
+ .reg_read = ad7606_spi_reg_read,
+ .reg_write = ad7606_spi_reg_write,
+ .write_mask = ad7606_spi_write_mask,
+ .rd_wr_cmd = ad7606B_spi_rd_wr_cmd,
+ .sw_mode_config = ad7606c_18_sw_mode_config,
+};
+
static int ad7606_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
@@ -315,8 +362,12 @@ static int ad7606_spi_probe(struct spi_device *spi)
bops = &ad7616_spi_bops;
break;
case ID_AD7606B:
+ case ID_AD7606C_16:
bops = &ad7606B_spi_bops;
break;
+ case ID_AD7606C_18:
+ bops = &ad7606c_18_spi_bops;
+ break;
default:
bops = &ad7606_spi_bops;
break;
@@ -333,6 +384,8 @@ static const struct spi_device_id ad7606_id_table[] = {
{ "ad7606-6", ID_AD7606_6 },
{ "ad7606-8", ID_AD7606_8 },
{ "ad7606b", ID_AD7606B },
+ { "ad7606c-16", ID_AD7606C_16 },
+ { "ad7606c-18", ID_AD7606C_18 },
{ "ad7616", ID_AD7616 },
{ }
};
@@ -344,6 +397,8 @@ static const struct of_device_id ad7606_of_match[] = {
{ .compatible = "adi,ad7606-6" },
{ .compatible = "adi,ad7606-8" },
{ .compatible = "adi,ad7606b" },
+ { .compatible = "adi,ad7606c-16" },
+ { .compatible = "adi,ad7606c-18" },
{ .compatible = "adi,ad7616" },
{ }
};
--
2.46.0