[PATCH v3 1/2] x86, KVM:SVM: Move sev specific parsing into arch/x86/virt/svm

[Pavan Kumar Paluri]

Move SEV specific kernel command line option parsing support from
arch/x86/coco/sev/core.c to arch/x86/virt/svm/cmdline.c so that both
host and guest related SEV command line options can be supported.

No functional changes intended.

Signed-off-by: Pavan Kumar Paluri <papaluri@xxxxxxx>
Reviewed-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
---
 arch/x86/coco/sev/core.c          | 44 -------------------------------
 arch/x86/include/asm/sev-common.h | 30 +++++++++++++++++++++
 arch/x86/virt/svm/Makefile        |  1 +
 arch/x86/virt/svm/cmdline.c       | 32 ++++++++++++++++++++++
 4 files changed, 63 insertions(+), 44 deletions(-)
 create mode 100644 arch/x86/virt/svm/cmdline.c

diff --git a/arch/x86/coco/sev/core.c b/arch/x86/coco/sev/core.c
index de1df0cb45da..ff19e805e7a1 100644
--- a/arch/x86/coco/sev/core.c
+++ b/arch/x86/coco/sev/core.c
@@ -141,33 +141,6 @@ static DEFINE_PER_CPU(struct sev_es_save_area *, sev_vmsa);
 static DEFINE_PER_CPU(struct svsm_ca *, svsm_caa);
 static DEFINE_PER_CPU(u64, svsm_caa_pa);
 
-struct sev_config {
-	__u64 debug		: 1,
-
-	      /*
-	       * Indicates when the per-CPU GHCB has been created and registered
-	       * and thus can be used by the BSP instead of the early boot GHCB.
-	       *
-	       * For APs, the per-CPU GHCB is created before they are started
-	       * and registered upon startup, so this flag can be used globally
-	       * for the BSP and APs.
-	       */
-	      ghcbs_initialized	: 1,
-
-	      /*
-	       * Indicates when the per-CPU SVSM CA is to be used instead of the
-	       * boot SVSM CA.
-	       *
-	       * For APs, the per-CPU SVSM CA is created as part of the AP
-	       * bringup, so this flag can be used globally for the BSP and APs.
-	       */
-	      use_cas		: 1,
-
-	      __reserved	: 61;
-};
-
-static struct sev_config sev_cfg __read_mostly;
-
 static __always_inline bool on_vc_stack(struct pt_regs *regs)
 {
 	unsigned long sp = regs->sp;
@@ -2374,23 +2347,6 @@ static int __init report_snp_info(void)
 }
 arch_initcall(report_snp_info);
 
-static int __init init_sev_config(char *str)
-{
-	char *s;
-
-	while ((s = strsep(&str, ","))) {
-		if (!strcmp(s, "debug")) {
-			sev_cfg.debug = true;
-			continue;
-		}
-
-		pr_info("SEV command-line option '%s' was not recognized\n", s);
-	}
-
-	return 1;
-}
-__setup("sev=", init_sev_config);
-
 static void update_attest_input(struct svsm_call *call, struct svsm_attest_call *input)
 {
 	/* If (new) lengths have been returned, propagate them up */
diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 98726c2b04f8..d3e7f97e2a4a 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -8,6 +8,9 @@
 #ifndef __ASM_X86_SEV_COMMON_H
 #define __ASM_X86_SEV_COMMON_H
 
+#include <asm/cache.h>
+#include <asm/pgtable_types.h>
+
 #define GHCB_MSR_INFO_POS		0
 #define GHCB_DATA_LOW			12
 #define GHCB_MSR_INFO_MASK		(BIT_ULL(GHCB_DATA_LOW) - 1)
@@ -220,4 +223,31 @@ struct snp_psc_desc {
 #define GHCB_ERR_INVALID_INPUT		5
 #define GHCB_ERR_INVALID_EVENT		6
 
+struct sev_config {
+	__u64 debug		: 1,
+
+	      /*
+	       * Indicates when the per-CPU GHCB has been created and registered
+	       * and thus can be used by the BSP instead of the early boot GHCB.
+	       *
+	       * For APs, the per-CPU GHCB is created before they are started
+	       * and registered upon startup, so this flag can be used globally
+	       * for the BSP and APs.
+	       */
+	      ghcbs_initialized	: 1,
+
+	      /*
+	       * Indicates when the per-CPU SVSM CA is to be used instead of the
+	       * boot SVSM CA.
+	       *
+	       * For APs, the per-CPU SVSM CA is created as part of the AP
+	       * bringup, so this flag can be used globally for the BSP and APs.
+	       */
+	      use_cas		: 1,
+
+	      __reserved	: 61;
+};
+
+extern struct sev_config sev_cfg __read_mostly;
+
 #endif
diff --git a/arch/x86/virt/svm/Makefile b/arch/x86/virt/svm/Makefile
index ef2a31bdcc70..eca6d71355fa 100644
--- a/arch/x86/virt/svm/Makefile
+++ b/arch/x86/virt/svm/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 
 obj-$(CONFIG_KVM_AMD_SEV) += sev.o
+obj-$(CONFIG_CPU_SUP_AMD) += cmdline.o
diff --git a/arch/x86/virt/svm/cmdline.c b/arch/x86/virt/svm/cmdline.c
new file mode 100644
index 000000000000..964677ab02d6
--- /dev/null
+++ b/arch/x86/virt/svm/cmdline.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD SVM-SEV command line parsing support
+ *
+ * Copyright (C) 2023 - 2024 Advanced Micro Devices, Inc.
+ *
+ * Author: Michael Roth <michael.roth@xxxxxxx>
+ */
+
+#include <linux/string.h>
+#include <linux/printk.h>
+
+#include <asm/sev-common.h>
+
+struct sev_config sev_cfg;
+
+static int __init init_sev_config(char *str)
+{
+	char *s;
+
+	while ((s = strsep(&str, ","))) {
+		if (!strcmp(s, "debug")) {
+			sev_cfg.debug = true;
+			continue;
+		}
+
+		pr_info("SEV command-line option '%s' was not recognized\n", s);
+	}
+
+	return 1;
+}
+__setup("sev=", init_sev_config);
-- 
2.34.1