[PATCH] spi: spi-fsl-lpspi: Use IRQF_NO_AUTOEN flag in request_irq()

[Jinjie Ruan]

disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Fixes: 9728fb3ce117 ("spi: lpspi: disable lpspi module irq in DMA mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
---
 drivers/spi/spi-fsl-lpspi.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 8f8496578d6b..7ab251e911a8 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -891,7 +891,7 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = devm_request_irq(&pdev->dev, irq, fsl_lpspi_isr, 0,
+	ret = devm_request_irq(&pdev->dev, irq, fsl_lpspi_isr, IRQF_NO_AUTOEN,
 			       dev_name(&pdev->dev), fsl_lpspi);
 	if (ret) {
 		dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
@@ -948,14 +948,10 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller);
 	if (ret == -EPROBE_DEFER)
 		goto out_pm_get;
-	if (ret < 0)
+	if (ret < 0) {
 		dev_warn(&pdev->dev, "dma setup error %d, use pio\n", ret);
-	else
-		/*
-		 * disable LPSPI module IRQ when enable DMA mode successfully,
-		 * to prevent the unexpected LPSPI module IRQ events.
-		 */
-		disable_irq(irq);
+		enable_irq(irq);
+	}
 
 	ret = devm_spi_register_controller(&pdev->dev, controller);
 	if (ret < 0) {
-- 
2.34.1