[PATCH v15 01/32] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices

From: Delphine CC Chiu
Date: Fri Sep 06 2024 - 02:27:43 EST

Next message: Delphine CC Chiu: "[PATCH v15 03/32] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting"
Previous message: Delphine CC Chiu: "[PATCH v15 02/32] ARM: dts: aspeed: yosemite4: Enable adc15"
In reply to: Delphine CC Chiu: "[PATCH v15 02/32] ARM: dts: aspeed: yosemite4: Enable adc15"
Next in thread: Delphine CC Chiu: "[PATCH v15 03/32] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Revise Yosemite 4 devicetree for devices behind i2c-mux
- Add gpio and eeprom behind i2c-mux
- Remove redundant idle-state setting for i2c-mux

Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 381 ++++++++++++++++--
1 file changed, 347 insertions(+), 34 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..ce206e2c461b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -17,6 +17,25 @@ aliases {
serial6 = &uart7;
serial7 = &uart8;
serial8 = &uart9;
+
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+ i2c32 = &imux32;
+ i2c33 = &imux33;
};

chosen {
@@ -259,9 +278,109 @@ &i2c8 {
bus-frequency = <400000>;
i2c-mux@70 {
compatible = "nxp,pca9544";
- idle-state = <0>;
i2c-mux-idle-disconnect;
reg = <0x70>;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
};
};

@@ -270,15 +389,174 @@ &i2c9 {
bus-frequency = <400000>;
i2c-mux@71 {
compatible = "nxp,pca9544";
- idle-state = <0>;
i2c-mux-idle-disconnect;
reg = <0x71>;
+
+ imux20: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+
+ imux21: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+
+ imux22: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
+
+ imux23: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ gpio@49 {
+ compatible = "nxp,pca9537";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ };
};
};

&i2c10 {
status = "okay";
bus-frequency = <400000>;
+ i2c-mux@74 {
+ compatible = "nxp,pca9544";
+ i2c-mux-idle-disconnect;
+ reg = <0x74>;
+
+ imux28: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "","","","",
+ "NIC0_MAIN_PWR_EN","NIC1_MAIN_PWR_EN",
+ "NIC2_MAIN_PWR_EN","NIC3_MAIN_PWR_EN",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
+ };
+ };
+
+ imux29: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
};

&i2c11 {
@@ -440,16 +718,14 @@ eeprom@51 {
reg = <0x51>;
};

- i2c-mux@71 {
- compatible = "nxp,pca9846";
+ i2c-mux@74 {
+ compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
-
- idle-state = <0>;
i2c-mux-idle-disconnect;
- reg = <0x71>;
+ reg = <0x74>;

- i2c@0 {
+ imux30: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
@@ -457,26 +733,26 @@ i2c@0 {
adc@1f {
compatible = "ti,adc128d818";
reg = <0x1f>;
- ti,mode = /bits/ 8 <2>;
+ ti,mode = /bits/ 8 <1>;
};

pwm@20{
- compatible = "max31790";
+ compatible = "maxim,max31790";
+ pwm-as-tach = <4 5>;
reg = <0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
};

gpio@22{
compatible = "ti,tca6424";
reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
};

- pwm@23{
- compatible = "max31790";
- reg = <0x23>;
- #address-cells = <1>;
- #size-cells = <0>;
+ pwm@2f{
+ compatible = "maxim,max31790";
+ pwm-as-tach = <4 5>;
+ reg = <0x2f>;
};

adc@33 {
@@ -499,34 +775,34 @@ gpio@61 {
};
};

- i2c@1 {
+ imux31: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0>;
+ reg = <1>;

adc@1f {
compatible = "ti,adc128d818";
reg = <0x1f>;
- ti,mode = /bits/ 8 <2>;
+ ti,mode = /bits/ 8 <1>;
};

pwm@20{
- compatible = "max31790";
+ compatible = "maxim,max31790";
+ pwm-as-tach = <4 5>;
reg = <0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
};

gpio@22{
compatible = "ti,tca6424";
reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
};

- pwm@23{
- compatible = "max31790";
- reg = <0x23>;
- #address-cells = <1>;
- #size-cells = <0>;
+ pwm@2f{
+ compatible = "maxim,max31790";
+ pwm-as-tach = <4 5>;
+ reg = <0x2f>;
};

adc@33 {
@@ -554,12 +830,10 @@ i2c-mux@73 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
-
- idle-state = <0>;
i2c-mux-idle-disconnect;
reg = <0x73>;

- i2c@0 {
+ imux32: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
@@ -570,10 +844,10 @@ adc@35 {
};
};

- i2c@1 {
+ imux33: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0>;
+ reg = <1>;

adc@35 {
compatible = "maxim,max11617";
@@ -596,9 +870,48 @@ mctp@10 {

i2c-mux@72 {
compatible = "nxp,pca9544";
- idle-state = <0>;
i2c-mux-idle-disconnect;
reg = <0x72>;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
};
};

--
2.25.1

Next message: Delphine CC Chiu: "[PATCH v15 03/32] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting"
Previous message: Delphine CC Chiu: "[PATCH v15 02/32] ARM: dts: aspeed: yosemite4: Enable adc15"
In reply to: Delphine CC Chiu: "[PATCH v15 02/32] ARM: dts: aspeed: yosemite4: Enable adc15"
Next in thread: Delphine CC Chiu: "[PATCH v15 03/32] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]