Re: [PATCH v6 3/3] hwmon: (isl28022) support shunt voltage for ISL28022 power monitor
From: Krzysztof Kozlowski
Date: Fri Sep 06 2024 - 03:31:43 EST
On 06/09/2024 08:14, Delphine CC Chiu wrote:
> Added support reading shunt voltage in mV and revise code
> for Renesas ISL28022.
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> ---
> drivers/hwmon/isl28022.c | 93 ++++++++++++++++++++++++++++------------
> 1 file changed, 66 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/hwmon/isl28022.c b/drivers/hwmon/isl28022.c
> index f0494c3bd483..01220fad813d 100644
> --- a/drivers/hwmon/isl28022.c
> +++ b/drivers/hwmon/isl28022.c
> @@ -85,8 +85,6 @@ struct isl28022_data {
> u32 shunt;
> u32 gain;
> u32 average;
> - u16 config;
> - u16 calib;
> };
>
> static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
> @@ -95,20 +93,61 @@ static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
> struct isl28022_data *data = dev_get_drvdata(dev);
> unsigned int regval;
> int err;
> + u16 sign_bit;
>
> switch (type) {
> case hwmon_in:
> - switch (attr) {
> - case hwmon_in_input:
> - err = regmap_read(data->regmap,
> - ISL28022_REG_BUS, ®val);
> - if (err < 0)
> - return err;
> - /* driver supports only 60V mode (BRNG 11) */
> - *val = (long)(((u16)regval) & 0xFFFC);
> + switch (channel) {
> + case 0:
> + switch (attr) {
> + case hwmon_in_input:
> + err = regmap_read(data->regmap,
> + ISL28022_REG_BUS, ®val);
> + if (err < 0)
> + return err;
> + /* driver supports only 60V mode (BRNG 11) */
> + *val = (long)(((u16)regval) & 0xFFFC);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> + break;
> + case 1:
> + switch (attr) {
> + case hwmon_in_input:
> + err = regmap_read(data->regmap,
> + ISL28022_REG_SHUNT, ®val);
> + if (err < 0)
> + return err;
> + switch (data->gain) {
> + case 8:
> + sign_bit = (regval >> 15) & 0x01;
> + *val = (long)((((u16)regval) & 0x7FFF) -
> + (sign_bit * 32768)) / 100;
> + break;
> + case 4:
> + sign_bit = (regval >> 14) & 0x01;
> + *val = (long)((((u16)regval) & 0x3FFF) -
> + (sign_bit * 16384)) / 100;
> + break;
> + case 2:
> + sign_bit = (regval >> 13) & 0x01;
> + *val = (long)((((u16)regval) & 0x1FFF) -
> + (sign_bit * 8192)) / 100;
> + break;
> + case 1:
> + sign_bit = (regval >> 12) & 0x01;
> + *val = (long)((((u16)regval) & 0x0FFF) -
> + (sign_bit * 4096)) / 100;
> + break;
> + }
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> break;
> default:
> - return -EINVAL;
> + return -EOPNOTSUPP;
> }
> break;
> case hwmon_curr:
> @@ -122,7 +161,7 @@ static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
> (long)data->shunt;
> break;
> default:
> - return -EINVAL;
> + return -EOPNOTSUPP;
> }
> break;
> case hwmon_power:
> @@ -136,11 +175,11 @@ static int isl28022_read(struct device *dev, enum hwmon_sensor_types type,
> (long)data->shunt) * (long)regval;
> break;
> default:
> - return -EINVAL;
> + return -EOPNOTSUPP;
> }
> break;
> default:
> - return -EINVAL;
> + return -EOPNOTSUPP;
> }
>
> return 0;
> @@ -182,7 +221,8 @@ static umode_t isl28022_is_visible(const void *data, enum hwmon_sensor_types typ
>
> static const struct hwmon_channel_info *isl28022_info[] = {
> HWMON_CHANNEL_INFO(in,
> - HWMON_I_INPUT), /* channel 0: bus voltage (mV) */
> + HWMON_I_INPUT, /* channel 0: bus voltage (mV) */
> + HWMON_I_INPUT), /* channel 1: shunt voltage (mV) */
> HWMON_CHANNEL_INFO(curr,
> HWMON_C_INPUT), /* channel 1: current (mA) */
> HWMON_CHANNEL_INFO(power,
> @@ -368,24 +408,22 @@ static int isl28022_read_properties(struct device *dev, struct isl28022_data *da
> static int isl28022_config(struct isl28022_data *data)
> {
> int err;
> + u16 config;
> + u16 calib;
>
> - data->config = (ISL28022_MODE_CONT_SB << ISL28022_MODE_SHIFT) |
> + config = (ISL28022_MODE_CONT_SB << ISL28022_MODE_SHIFT) |
> (ISL28022_BRNG_60 << ISL28022_BRNG_SHIFT) |
> (__ffs(data->gain) << ISL28022_PG_SHIFT) |
> ((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_SADC_SHIFT) |
> ((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_BADC_SHIFT);
>
> - data->calib = data->shunt ? 0x8000 / data->gain : 0;
> -
> - err = regmap_write(data->regmap, ISL28022_REG_CONFIG, data->config);
> - if (err < 0)
> - return err;
> + calib = data->shunt ? 0x8000 / data->gain : 0;
>
> - err = regmap_write(data->regmap, ISL28022_REG_CALIB, data->calib);
> + err = regmap_write(data->regmap, ISL28022_REG_CONFIG, config);
> if (err < 0)
> return err;
>
> - return 0;
> + return regmap_write(data->regmap, ISL28022_REG_CALIB, calib);
> }
>
> static int isl28022_probe(struct i2c_client *client)
> @@ -396,8 +434,8 @@ static int isl28022_probe(struct i2c_client *client)
> int err;
>
> if (!i2c_check_functionality(client->adapter,
> - I2C_FUNC_SMBUS_BYTE_DATA |
> - I2C_FUNC_SMBUS_WORD_DATA))
> + I2C_FUNC_SMBUS_BYTE_DATA |
> + I2C_FUNC_SMBUS_WORD_DATA))
> return -ENODEV;
>
> data = devm_kzalloc(dev, sizeof(struct isl28022_data), GFP_KERNEL);
> @@ -418,7 +456,7 @@ static int isl28022_probe(struct i2c_client *client)
>
> isl28022_debugfs_init(client, data);
>
> - hwmon_dev = devm_hwmon_device_register_with_info(dev, "isl28022_hwmon",
> + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
> data, &isl28022_chip_info, NULL);
> if (IS_ERR(hwmon_dev))
> return PTR_ERR(hwmon_dev);
> @@ -437,8 +475,9 @@ static struct i2c_driver isl28022_driver = {
> .class = I2C_CLASS_HWMON,
> .driver = {
> .name = "isl28022",
> + .of_match_table = of_match_ptr(isl28022_of_match),
This is both unrelated and wrong. Your of_match_ptr causes here warnings.
Organize your patchset in logical chunks and be sure EACH has no
warnings. Your patch #1 now has such warnings. Please run standard
kernel tools for static analysis, like coccinelle, smatch and sparse,
and fix reported warnings. Also please check for warnings when building
with W=1. Most of these commands (checks or W=1 build) can build
specific targets, like some directory, to narrow the scope to only your
code. The code here looks like it needs a fix. Feel free to get in touch
if the warning is not clear.
Best regards,
Krzysztof