RE: [PATCH] can: m_can: Enable NAPI before enabling interrupts

[Hamby, Jake (US)]

> If any error flags are set when bringing up the CAN device, e.g. due to
> CAN bus traffic before initializing the device, when m_can_start is
> called and interrupts are enabled, m_can_isr is called immediately,
> which disables all CAN interrupts and calls napi_schedule.

My apologies for the duplicate post. I had to change Outlook from Windows to UTF-8 encoding and then I wasn't patient enough to wait to see if that fixed my failure to post.

Best Regards,
Jake Hamby