[PATCH v2 0/2] iio: temperature: tmp006: support for drdy irq

[Antoni Pokusinski]

This patch series adds support for the data ready interrupt of tmp006
sensor. The interrupt line is pulled down once there is a measurement
available to be read. Hence, triggered buffers are used in order to
support continuous data capture for the sensor.

Changes since v1:
  * dt-binding: improve the commit message
  * tmp006_read_raw: use iio_device_claim_direct_scoped()
  * tmp006_channels[] : add trailing commas
  * tmp006_trigger_handler: use s32 to check return value of read_word_data()
  * tmp006_set_trigger_state: fix data alignment
  * tmp006_probe: check return value of devm_iio_triggered_buffer_setup()
  * tmp006_probe: remove IRQF_TRIGGER_FALLING from irqflags argument of
    devm_request_threaded_irq()
  * tmp006_probe: set avaliable_scan_masks to tmp006_scan_masks[]

Antoni Pokusinski (2):
  iio: temperature: tmp006: add triggered buffer support
  dt-bindings: iio: temperature: tmp006: document interrupt

 .../bindings/iio/temperature/ti,tmp006.yaml   |   6 +
 drivers/iio/temperature/Kconfig               |   2 +
 drivers/iio/temperature/tmp006.c              | 134 ++++++++++++++++--
 3 files changed, 129 insertions(+), 13 deletions(-)

-- 
2.25.1