Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table

[Andi Shyti]

On Mon, Sep 09, 2024 at 09:56:25AM GMT, Tyrone Ting wrote:
> Hi Andi:
> 
> Thank you for your review.
> 
> Andi Shyti <andi.shyti@xxxxxxxxxx> 於 2024年9月6日 週五 上午5:43寫道：
> >
> > Hi,
> >
> > On Fri, Aug 30, 2024 at 11:46:39AM GMT, Tyrone Ting wrote:
> > > Modify i2c frequency from table parameters
> > > for NPCM i2c modules.
> > >
> > > Supported frequencies are:
> > >
> > > 1. 100KHz
> > > 2. 400KHz
> > > 3. 1MHz
> >
> > I agree with Andy, please add a good explanation for this change.
> >
> > > Signed-off-by: Tyrone Ting <kfting@xxxxxxxxxxx>
> > > ---
> > >  drivers/i2c/busses/i2c-npcm7xx.c | 230 +++++++++++++++++++------------
> > >  1 file changed, 144 insertions(+), 86 deletions(-)
> > >
> > > diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
> > > index 67d156ed29b9..cac4ea0b69b8 100644
> > > --- a/drivers/i2c/busses/i2c-npcm7xx.c
> > > +++ b/drivers/i2c/busses/i2c-npcm7xx.c
> > > @@ -263,6 +263,121 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
> > >  #define I2C_FREQ_MIN_HZ                      10000
> > >  #define I2C_FREQ_MAX_HZ                      I2C_MAX_FAST_MODE_PLUS_FREQ
> > >
> > > +struct SMB_TIMING_T {
> >
> > Please run checkpatch.pl before sending the patches.
> I did run the checkpatch.pl against this patch.
> Here is the log from the checkpatch.pl:
> -------------------------------------------------------------
> ./patch_i2c_v2/v2-0006-i2c-npcm-use-i2c-frequency-table.patch
> -------------------------------------------------------------
> total: 0 errors, 0 warnings, 265 lines checked
> 
> ./patch_i2c_v2/v2-0006-i2c-npcm-use-i2c-frequency-table.patch has no
> obvious style problems and is ready for submission.

mmhhh... I thought checkpatch hated capital letter declarations.

Please, then, use only lower character names for declarations.

Thanks,
Andi