Re: [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch

[Tyrone Ting]

Hi Andi:

Thank you for your feedback.

Andi Shyti <andi.shyti@xxxxxxxxxx> 於 2024年9月9日 週一 下午9:00寫道：
>
> Hi,
>
> On Fri, Aug 30, 2024 at 11:46:33AM GMT, Tyrone Ting wrote:
> > This patchset includes the following fixes:
> >
> > - Restore the npcm_i2caddr array length to fix the smatch warning.
> > - Enable the target functionality in the interrupt handling routine
> >   when the i2c transfer is about to finish.
> > - Correct the read/write operation procedure.
> > - Introduce a software flag to handle the bus error (BER) condition
> >   which is not caused by the i2c transfer.
> > - Modify timeout calculation.
> > - Assign the client address earlier logically.
> > - Use an i2c frequency table for the frequency parameters assignment.
> > - Coding style fix.
> >
> > The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards.
>
> first of all, Thanks Tali for your reviews.
>
> Second, Tyronne, can we please incorporate Tali's comments into
> commit messages and improve the code comments so that we don't
> leave room for more questions?
>
Understood. They'll be incorporated in next patch set.

> Consider that not everyone knows the device and we need good
> reasons for accepting the changes.
>
> Thanks,
> Andi
>
>
> > Addressed comments from:
> > - kernel test robot : https://lore.kernel.org/oe-kbuild-all/
> >   202408080319.de2B6PgU-lkp@xxxxxxxxx/
> > - Dan Carpenter : https://lore.kernel.org/all/202408130818
> >   .FgDP5uNm-lkp@xxxxxxxxx/
> > - Andrew Jeffery : https://lore.kernel.org/lkml/
> >   20240807100244.16872-7-kfting@xxxxxxxxxxx/T/
> >   #m3ed3351bf59675bfe0de89c75aae1fb26cad5567
> >
> > Changes since version 1:
> > - Restore the npcm_i2caddr array length to fix the smatch warning.
> > - Remove unused variables.
> > - Handle the condition where scl_table_cnt reaches to the maximum value.
> > - Fix the checkpatch warning.
> >
> > Charles Boyer (1):
> >   i2c: npcm: Enable slave in eob interrupt
> >
> > Tyrone Ting (6):
> >   i2c: npcm: restore slave addresses array length
> >   i2c: npcm: correct the read/write operation procedure
> >   i2c: npcm: use a software flag to indicate a BER condition
> >   i2c: npcm: Modify timeout evaluation mechanism
> >   i2c: npcm: Modify the client address assignment
> >   i2c: npcm: use i2c frequency table
> >
> >  drivers/i2c/busses/i2c-npcm7xx.c | 276 +++++++++++++++++++------------
> >  1 file changed, 172 insertions(+), 104 deletions(-)
> >
> >
> > base-commit: 5be63fc19fcaa4c236b307420483578a56986a37
> > --
> > 2.34.1
> >

Thank you.

Regards,
Tyrone