[PATCH v1] regulator: Fix typos in the comment

[Yu Jiaoliang]

Fixed some confusing typographical errors:
comptabile->compatible,
asignment->assignment,
Verison->Version,
meansurement->measurement,
offets->offsets.

Signed-off-by: Yu Jiaoliang <yujiaoliang@xxxxxxxx>
---
 drivers/regulator/da903x-regulator.c    | 2 +-
 drivers/regulator/da9063-regulator.c    | 2 +-
 drivers/regulator/fan53555.c            | 2 +-
 drivers/regulator/max5970-regulator.c   | 2 +-
 drivers/regulator/qcom_spmi-regulator.c | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/da903x-regulator.c b/drivers/regulator/da903x-regulator.c
index f79337079a45..2f85897183b3 100644
--- a/drivers/regulator/da903x-regulator.c
+++ b/drivers/regulator/da903x-regulator.c
@@ -61,7 +61,7 @@
 #define DA9034_MDTV2		(0x33)
 #define DA9034_MVRC		(0x34)
 
-/* DA9035 Registers. DA9034 Registers are comptabile to DA9035. */
+/* DA9035 Registers. DA9034 Registers are compatible to DA9035. */
 #define DA9035_OVER3		(0x12)
 #define DA9035_VCC2		(0x1f)
 #define DA9035_3DTV1		(0x2c)
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 82bf321ae06f..e7dcfe40a278 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -133,7 +133,7 @@ struct da9063_regulator_info {
 	.suspend_vsel_reg = DA9063_REG_V##regl_name##_B, \
 	.mode = BFIELD(DA9063_REG_##regl_name##_CFG, DA9063_BUCK_MODE_MASK)
 
-/* Defines asignment of regulators info table to chip model */
+/* Defines assignment of regulators info table to chip model */
 struct da9063_dev_model {
 	const struct da9063_regulator_info	*regulator_info;
 	unsigned int				n_regulators;
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 17c9bf204385..bd9447dac596 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -46,7 +46,7 @@
 /* VSEL bit definitions */
 #define VSEL_BUCK_EN		BIT(7)
 #define VSEL_MODE		BIT(6)
-/* Chip ID and Verison */
+/* Chip ID and Version */
 #define DIE_ID			0x0F	/* ID1 */
 #define DIE_REV			0x0F	/* ID2 */
 /* Control bit definitions */
diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c
index 8bbcd983a74a..4a568b1b0107 100644
--- a/drivers/regulator/max5970-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -70,7 +70,7 @@ static int max5970_read(struct device *dev, enum hwmon_sensor_types type,
 			 * millivolts) and then divide it by the maximum value of the 10-bit ADC.
 			 */
 			*val = (*val * ddata->irng) >> 10;
-			/* Convert the voltage meansurement across shunt resistor to current */
+			/* Convert the voltage measurement across shunt resistor to current */
 			*val = (*val * 1000) / ddata->shunt_micro_ohms;
 			return 0;
 		default:
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 89657e8eea82..d66a0f61637e 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -245,7 +245,7 @@ enum spmi_saw3_registers {
 	SAW3_VERSION				= 0xFD0,
 };
 
-/* Used for indexing into ctrl_reg.  These are offets from 0x40 */
+/* Used for indexing into ctrl_reg.  These are offsets from 0x40 */
 enum spmi_common_control_register_index {
 	SPMI_COMMON_IDX_VOLTAGE_RANGE		= 0,
 	SPMI_COMMON_IDX_VOLTAGE_SET		= 1,
-- 
2.34.1