[PATCH v4 RESEND 0/3] coresight: Add static trace id support

[Mao Jinlong]

Some HW has static trace id which cannot be changed via
software programming. For this case, configure the trace id
in device tree with "arm,static-trace-id = <xxx>", and
call coresight_trace_id_get_static_system_id with the trace id value
in device probe function. The id will be reserved for the HW
all the time if the device is probed.

Changes since V3:
1. Adda new API function
int coresight_trace_id_get_system_static_id(int trace_id).
2. Use the term "static trace id" for these devices where
the hardware sets a non-programmable trace ID. 

Changes since V2:
1. Change "trace-id" to "arm,trace-id".
2. Add trace id flag for getting preferred id or ODD id.

Changes since V1:
1. Add argument to coresight_trace_id_get_system_id for preferred id
instead of adding new function coresight_trace_id_reserve_system_id.
2. Add constraint to trace-id in dt-binding file.

Mao Jinlong (3):
  dt-bindings: arm: Add arm,trace-id for coresight dummy source
  coresight: Add support to get static id for system trace sources
  coresight: dummy: Add static trace id support for dummy source

 .../sysfs-bus-coresight-devices-dummy-source  | 15 +++++
 .../arm/arm,coresight-dummy-source.yaml       |  6 ++
 drivers/hwtracing/coresight/coresight-dummy.c | 59 +++++++++++++++++--
 .../hwtracing/coresight/coresight-platform.c  | 26 ++++++++
 .../hwtracing/coresight/coresight-trace-id.c  | 38 ++++++++----
 .../hwtracing/coresight/coresight-trace-id.h  |  9 +++
 include/linux/coresight.h                     |  1 +
 7 files changed, 140 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-dummy-source

-- 
2.46.0