[PATCH v2 00/11] media: ov5645: Add support for streams

From: Prabhakar
Date: Tue Sep 10 2024 - 13:06:32 EST

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Hi All,

This patch series aims to add the below features,
- Support subdev active state
- Support for streams
- Support for virtual channel
- Code cleanup

Note, these patches are dependent on below:
1] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-27-sakari.ailus@xxxxxxxxxxxxxxx/
2] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-26-sakari.ailus@xxxxxxxxxxxxxxx/

RFC->v2
- Dropped setting of VC using routes
- Defaulted the native format to MEDIA_BUS_FMT_SBGGR8_1X8
- Fixed ov5645_enum_frame_size and ov5645_enum_mbus_code
for internal image pad

RFC patch,
Link: https://lore.kernel.org/all/20240904210719.52466-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/

Test logs:
====================================

root@smarc-rzg2l:~# media-ctl -p
.....
- entity 4: ov5645 0-003c (2 pads, 1 link, 1 route)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev1
routes:
1/0 -> 0/0 [ACTIVE]
pad0: SOURCE
[stream:0 fmt:UYVY8_1X16/1920x1080 field:none colorspace:srgb
crop:(0,0)/1920x1080]
-> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE]
pad1: SINK,0x8
[stream:0 fmt:SBGGR8_1X8/2592x1944 field:none colorspace:srgb
crop:(0,0)/1920x1080]
.....

root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=0
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0,stream=0)
0x200f: MEDIA_BUS_FMT_UYVY8_1X16
root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=1
ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=1,stream=0)
0x3001: MEDIA_BUS_FMT_SBGGR8_1X8
root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=1,code=0x3001
ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=1,stream=0)
Size Range: 2592x1944 - 2592x1944
root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=0,code=0x200f
ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=0,stream=0)
Size Range: 1280x960 - 1280x960
Size Range: 1920x1080 - 1920x1080
Size Range: 2592x1944 - 2592x1944
root@smarc-rzg2l:~#

v4l2-compliance log:
-------------------
root@smarc-rzg2l:~# v4l2-compliance -u /dev/v4l-subdev1
v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t
v4l2-compliance SHA: fc15e229d9d3 2024-07-23 19:22:15

Compliance test for device /dev/v[ 6347.789338] ov5645 0-003c: ================= START STATUS =================
4l-subdev1:

Driver In[ 6347.798197] ov5645 0-003c: ================== END STATUS ==================
fo:
Driver version : 6.11.0
Capabilities : 0x00000002
Streams Support
Client Capabilities: 0x0000000000000003
streams interval-uses-which
Required ioctls:
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK

Allow for multiple opens:
test second /dev/v4l-subdev1 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK

Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)

Sub-Device routing ioctls:
test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK
test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK

Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 12 Private Controls: 0

Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)

Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)

Total for device /dev/v4l-subdev1: 47, Succeeded: 47, Failed: 0, Warnings: 0

Lad Prabhakar (11):
media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
media: i2c: ov5645: Use local `dev` pointer for subdev device
assignment
media: i2c: ov5645: Enable runtime PM after
v4l2_async_register_subdev()
media: i2c: ov5645: Use dev_err_probe instead of dev_err
media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
media: i2c: ov5645: Drop `power_lock` mutex
media: i2c: ov5645: Use subdev active state
media: i2c: ov5645: Switch to {enable,disable}_streams
media: i2c: ov5645: Add internal image sink pad
media: i2c: ov5645: Report internal routes to userspace
media: i2c: ov5645: Report streams using frame descriptors

drivers/media/i2c/ov5645.c | 433 ++++++++++++++++++++-----------------
1 file changed, 240 insertions(+), 193 deletions(-)

--
2.34.1