Re: [PATCH net-next v5 4/5] net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload

From: Roger Quadros
Date: Tue Sep 10 2024 - 15:15:19 EST

Next message: David Hildenbrand: "[PATCH v1 0/5] virtio-mem: s390x support"
Previous message: Rasmus Villemoes: "Re: [PATCH 2/2] rtc: isl12022: Add alarm support"
In reply to: Anwar, Md Danish: "Re: [PATCH net-next v5 4/5] net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 10/09/2024 21:27, Anwar, Md Danish wrote:
>
>
> On 9/10/2024 11:36 PM, Roger Quadros wrote:
>>
>>
>> On 10/09/2024 20:52, Anwar, Md Danish wrote:
>>> Hi Roger,
>>>
>>> On 9/10/2024 11:08 PM, Roger Quadros wrote:
>>>>
>>>>
>>>> On 06/09/2024 14:15, MD Danish Anwar wrote:
>>>>> From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
>>>>>
>>>>> The HSR stack allows to offload its Tx packet duplication functionality to
>>>>> the hardware. Enable this offloading feature for ICSSG driver. Add support
>>>>> to offload HSR Tx Tag Insertion and Rx Tag Removal and duplicate discard.
>>>>>
>>>>> Inorder to enable hsr-tag-ins-offload, hsr-dup-offload must also be enabled
>>>>
>>>> "In order"
>>>>
>>>>> as these are tightly coupled in the firmware implementation.
>>>>>
>>>>> Duplicate discard is done as part of RX tag removal and it is
>>>>> done by the firmware. When driver sends the r30 command
>>>>> ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE, firmware does RX tag removal as well as
>>>>> duplicate discard.
>>>>>
>>>>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
>>>>> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx>
>>>>> ---
>>>>> drivers/net/ethernet/ti/icssg/icssg_common.c | 18 ++++++++++---
>>>>> drivers/net/ethernet/ti/icssg/icssg_config.c | 4 ++-
>>>>> drivers/net/ethernet/ti/icssg/icssg_config.h | 2 ++
>>>>> drivers/net/ethernet/ti/icssg/icssg_prueth.c | 28 +++++++++++++++++++-
>>>>> drivers/net/ethernet/ti/icssg/icssg_prueth.h | 3 +++
>>>>> 5 files changed, 50 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_common.c b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>>> index b9d8a93d1680..fdebeb2f84e0 100644
>>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_common.c
>>>>> @@ -660,14 +660,15 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>>>>> {
>>>>> struct cppi5_host_desc_t *first_desc, *next_desc, *cur_desc;
>>>>> struct prueth_emac *emac = netdev_priv(ndev);
>>>>> + struct prueth *prueth = emac->prueth;
>>>>> struct netdev_queue *netif_txq;
>>>>> struct prueth_tx_chn *tx_chn;
>>>>> dma_addr_t desc_dma, buf_dma;
>>>>> + u32 pkt_len, dst_tag_id;
>>>>> int i, ret = 0, q_idx;
>>>>> bool in_tx_ts = 0;
>>>>> int tx_ts_cookie;
>>>>> void **swdata;
>>>>> - u32 pkt_len;
>>>>> u32 *epib;
>>>>>
>>>>> pkt_len = skb_headlen(skb);
>>>>> @@ -712,9 +713,20 @@ enum netdev_tx icssg_ndo_start_xmit(struct sk_buff *skb, struct net_device *ndev
>>>>>
>>>>> /* set dst tag to indicate internal qid at the firmware which is at
>>>>> * bit8..bit15. bit0..bit7 indicates port num for directed
>>>>> - * packets in case of switch mode operation
>>>>> + * packets in case of switch mode operation and port num 0
>>>>> + * for undirected packets in case of HSR offload mode
>>>>> */
>>>>> - cppi5_desc_set_tags_ids(&first_desc->hdr, 0, (emac->port_id | (q_idx << 8)));
>>>>> + dst_tag_id = emac->port_id | (q_idx << 8);
>>>>> +
>>>>> + if (prueth->is_hsr_offload_mode &&
>>>>> + (ndev->features & NETIF_F_HW_HSR_DUP))
>>>>> + dst_tag_id = PRUETH_UNDIRECTED_PKT_DST_TAG;
>>>>> +
>>>>> + if (prueth->is_hsr_offload_mode &&
>>>>> + (ndev->features & NETIF_F_HW_HSR_TAG_INS))
>>>>> + epib[1] |= PRUETH_UNDIRECTED_PKT_TAG_INS;
>>>>> +
>>>>> + cppi5_desc_set_tags_ids(&first_desc->hdr, 0, dst_tag_id);
>>>>> k3_udma_glue_tx_dma_to_cppi5_addr(tx_chn->tx_chn, &buf_dma);
>>>>> cppi5_hdesc_attach_buf(first_desc, buf_dma, pkt_len, buf_dma, pkt_len);
>>>>> swdata = cppi5_hdesc_get_swdata(first_desc);
>>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>>> index 7b2e6c192ff3..72ace151d8e9 100644
>>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
>>>>> @@ -531,7 +531,9 @@ static const struct icssg_r30_cmd emac_r32_bitmask[] = {
>>>>> {{EMAC_NONE, 0xffff4000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx ENABLE*/
>>>>> {{EMAC_NONE, 0xbfff0000, EMAC_NONE, EMAC_NONE}}, /* Preemption on Tx DISABLE*/
>>>>> {{0xffff0010, EMAC_NONE, 0xffff0010, EMAC_NONE}}, /* VLAN AWARE*/
>>>>> - {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}} /* VLAN UNWARE*/
>>>>> + {{0xffef0000, EMAC_NONE, 0xffef0000, EMAC_NONE}}, /* VLAN UNWARE*/
>>>>> + {{0xffff2000, EMAC_NONE, EMAC_NONE, EMAC_NONE}}, /* HSR_RX_OFFLOAD_ENABLE */
>>>>> + {{0xdfff0000, EMAC_NONE, EMAC_NONE, EMAC_NONE}} /* HSR_RX_OFFLOAD_DISABLE */
>>>>> };
>>>>>
>>>>> int icssg_set_port_state(struct prueth_emac *emac,
>>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>>> index 1ac60283923b..92c2deaa3068 100644
>>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
>>>>> @@ -80,6 +80,8 @@ enum icssg_port_state_cmd {
>>>>> ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
>>>>> ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
>>>>> ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
>>>>> + ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE,
>>>>> + ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE,
>>>>> ICSSG_EMAC_PORT_MAX_COMMANDS
>>>>> };
>>>>>
>>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>>> index 676168d6fded..9af06454ba64 100644
>>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
>>>>> @@ -41,7 +41,10 @@
>>>>> #define DEFAULT_PORT_MASK 1
>>>>> #define DEFAULT_UNTAG_MASK 1
>>>>>
>>>>> -#define NETIF_PRUETH_HSR_OFFLOAD_FEATURES NETIF_F_HW_HSR_FWD
>>>>> +#define NETIF_PRUETH_HSR_OFFLOAD_FEATURES (NETIF_F_HW_HSR_FWD | \
>>>>> + NETIF_F_HW_HSR_DUP | \
>>>>> + NETIF_F_HW_HSR_TAG_INS | \
>>>>> + NETIF_F_HW_HSR_TAG_RM)
>>>>>
>>>>> /* CTRLMMR_ICSSG_RGMII_CTRL register bits */
>>>>> #define ICSSG_CTRL_RGMII_ID_MODE BIT(24)
>>>>> @@ -758,6 +761,21 @@ static void emac_change_hsr_feature(struct net_device *ndev,
>>>>> }
>>>>> }
>>>>>
>>>>> +static netdev_features_t emac_ndo_fix_features(struct net_device *ndev,
>>>>> + netdev_features_t features)
>>>>> +{
>>>>> + /* In order to enable hsr tag insertion offload, hsr dup offload must
>>>>> + * also be enabled as these two are tightly coupled in firmware
>>>>> + * implementation.
>>>>> + */
>>>>> + if (features & NETIF_F_HW_HSR_TAG_INS)
>>>>> + features |= NETIF_F_HW_HSR_DUP;
>>>>
>>>> What if only NETIF_F_HW_HSR_DUP was set? Don't you have to set NETIF_F_HW_HSR_TAG_INS as well?
>>>>
>>>>> + else
>>>>> + features &= ~NETIF_F_HW_HSR_DUP;
>>>>
>>>> what if NETIF_F_HW_HSR_DUP was still set?
>>>>
>>>> I think you need to write a logic like follows.
>>>> if both are already cleared in ndev->features and any one is set in features you set both in features.
>>>> if both are already set in ndev->features and any one is cleared in features you clear both in features.
>>>>
>>>> is this reasonable?
>>>>
>>>
>>> Yes that does sound reasonable,
>>> How does below code look to you.
>>>
>>> if (!(ndev->features & NETIF_F_HW_HSR_DUP) &&
>>> !(ndev->features & NETIF_F_HW_HSR_TAG_INS))
>>
>> While this is OK. it could also be
>> if (!(ndev->features & (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS)))
>> Your choice.
>>
>>> if ((features & NETIF_F_HW_HSR_DUP) ||
>>> (features & NETIF_F_HW_HSR_TAG_INS)) {
>>> features |= NETIF_F_HW_HSR_DUP;
>>> features |= NETIF_F_HW_HSR_TAG_INS;
>> how about one line?
>> features |= NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS;
>>> }
>>
>> then you can get rid of the braces.
>>
>
> Yes I could do this but this make the line length go beyond 80
> characters. That's why I thought of putting this in two lines.

then you can split the line
e.g.
features |= NETIF_F_HW_HSR_DUP |
NETIF_F_HW_HSR_TAG_INS;
>
>>>
>>> if ((ndev->features & NETIF_F_HW_HSR_DUP) &&
>>> (ndev->features & NETIF_F_HW_HSR_TAG_INS))
>>> if (!(features & NETIF_F_HW_HSR_DUP) ||
>>> !(features & NETIF_F_HW_HSR_TAG_INS)) {
>>> features &= ~NETIF_F_HW_HSR_DUP;
>>> features &= ~NETIF_F_HW_HSR_TAG_INS;
>>
>> features &= ~(NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_TAG_INS);
>>
>>> }
>>>
>>>>> +
>>>>> + return features;
>>>>> +}
>>>>> +
>>>>> static int emac_ndo_set_features(struct net_device *ndev,
>>>>> netdev_features_t features)
>>>>> {
>>>>> @@ -780,6 +798,7 @@ static const struct net_device_ops emac_netdev_ops = {
>>>>> .ndo_eth_ioctl = icssg_ndo_ioctl,
>>>>> .ndo_get_stats64 = icssg_ndo_get_stats64,
>>>>> .ndo_get_phys_port_name = icssg_ndo_get_phys_port_name,
>>>>> + .ndo_fix_features = emac_ndo_fix_features,
>>>>> .ndo_set_features = emac_ndo_set_features,
>>>>> };
>>>>>
>>>>> @@ -1007,6 +1026,13 @@ static void icssg_change_mode(struct prueth *prueth)
>>>>>
>>>>> for (mac = PRUETH_MAC0; mac < PRUETH_NUM_MACS; mac++) {
>>>>> emac = prueth->emac[mac];
>>>>> + if (prueth->is_hsr_offload_mode) {
>>>>> + if (emac->ndev->features & NETIF_F_HW_HSR_TAG_RM)
>>>>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_ENABLE);
>>>>> + else
>>>>> + icssg_set_port_state(emac, ICSSG_EMAC_HSR_RX_OFFLOAD_DISABLE);
>>>>> + }
>>>>> +
>>>>> if (netif_running(emac->ndev)) {
>>>>> icssg_fdb_add_del(emac, eth_stp_addr, prueth->default_vlan,
>>>>> ICSSG_FDB_ENTRY_P0_MEMBERSHIP |
>>>>> diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>>> index a4b025fae797..bba6da2e6bd8 100644
>>>>> --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>>> +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
>>>>> @@ -59,6 +59,9 @@
>>>>>
>>>>> #define IEP_DEFAULT_CYCLE_TIME_NS 1000000 /* 1 ms */
>>>>>
>>>>> +#define PRUETH_UNDIRECTED_PKT_DST_TAG 0
>>>>> +#define PRUETH_UNDIRECTED_PKT_TAG_INS BIT(30)
>>>>> +
>>>>> /* Firmware status codes */
>>>>> #define ICSS_HS_FW_READY 0x55555555
>>>>> #define ICSS_HS_FW_DEAD 0xDEAD0000 /* lower 16 bits contain error code */
>>>>
>>>
>>
>

--
cheers,
-roger

Next message: David Hildenbrand: "[PATCH v1 0/5] virtio-mem: s390x support"
Previous message: Rasmus Villemoes: "Re: [PATCH 2/2] rtc: isl12022: Add alarm support"
In reply to: Anwar, Md Danish: "Re: [PATCH net-next v5 4/5] net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]