[PATCH] dt-bindings: clock: convert amlogic,meson8b-clkc.txt to dtschema

[Neil Armstrong]

Convert the Amlogic Meson8, Meson8b and Meson8m2 Clock and
Reset Controller to dt-schema.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 .../bindings/clock/amlogic,meson8-clkc.yaml        | 45 +++++++++++++++++++
 .../bindings/clock/amlogic,meson8b-clkc.txt        | 51 ----------------------
 2 files changed, 45 insertions(+), 51 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-clkc.yaml
new file mode 100644
index 000000000000..ab73d4654171
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-clkc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,meson8-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@xxxxxxxxxx>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson8-clkc
+          - amlogic,meson8b-clkc
+      - items:
+          - const: amlogic,meson8m2-clkc
+          - const: amlogic,meson8-clkc
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: xtal
+      - const: ddr_pll
+      - const: clk_32k
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#reset-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
deleted file mode 100644
index cc51e4746b3b..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
-
-The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
-supplies clock to various controllers within the SoC.
-
-Required Properties:
-
-- compatible: must be one of:
-	- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
-	- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
-	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-- clocks: list of clock phandles, one for each entry in clock-names
-- clock-names: should contain the following:
-  * "xtal": the 24MHz system oscillator
-  * "ddr_pll": the DDR PLL clock
-  * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
-
-Parent node should have the following properties :
-- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
-- reg: base address and size of the HHI system control register space.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
-used in device tree sources.
-
-Similarly a preprocessor macro for each reset line is defined in
-dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
-device tree sources).
-
-
-Example: Clock controller node:
-
-	clkc: clock-controller {
-		compatible = "amlogic,meson8b-clkc";
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart_AO: serial@c81004c0 {
-		compatible = "amlogic,meson-uart";
-		reg = <0xc81004c0 0x14>;
-		interrupts = <0 90 1>;
-		clocks = <&clkc CLKID_CLK81>;
-	};

---
base-commit: 47ac09b91befbb6a235ab620c32af719f8208399
change-id: 20240911-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson8-clkc-7dec15a0a5f0

Best regards,
-- 
Neil Armstrong <neil.armstrong@xxxxxxxxxx>