Re: [PATCH V3] i2c: imx-lpi2c: add target mode support

[Andi Shyti]

Hi Carlos,

On Wed, Sep 11, 2024 at 03:07:42PM GMT, Carlos Song wrote:
> > LPI2C support master controller and target controller enabled simultaneously.
> > Both controllers share same SDA/SCL lines and interrupt source but has
> > separate control and status registers.
> > Even if target mode is enabled, LPI2C can still work normally as master
> > controller at the same time.
> > 
> > This patch supports basic target data read/write operations in 7-bit target
> > address. LPI2C target mode can be enabled by using I2C slave backend. I2C
> > slave backend behave like a standard I2C client. For simple use and test, Linux
> > I2C slave EEPROM backend can be used.
> > 
> 
> Hi, Andi
> 
> Just now I found I still have work to do! Before I notice to need to enrich commit log only.
> Oh..It's a little embarrassing. Sorry for missing other comment. I will send V4 then finish the rest:).

no problem, no need to be embarrassed :-)

Take your time!

Andi