Re: [PATCH net-next V2 2/5] net: lan743x: Add support to software-nodes for sfp

[Andrew Lunn]

> diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
> index 2e3eb37a45cd..9c08a4af257a 100644
> --- a/drivers/net/ethernet/microchip/Kconfig
> +++ b/drivers/net/ethernet/microchip/Kconfig
> @@ -50,6 +50,8 @@ config LAN743X
>  	select CRC16
>  	select CRC32
>  	select PHYLINK
> +	select I2C_PCI1XXXX
> +	select GP_PCI1XXXX

GP_ is odd. GPIO drivers usually use GPIO_. Saying that, GPIO_PCI1XXXX
is not in 6.11-rc7. Is it in gpio-next?

> +static void *pci1xxxx_perif_drvdata_get(struct lan743x_adapter *adapter,
> +					u16 perif_id)
> +{
> +	struct pci_dev *pdev = adapter->pdev;
> +	struct pci_bus *perif_bus;
> +	struct pci_dev *perif_dev;
> +	struct pci_dev *br_dev;
> +	struct pci_bus *br_bus;
> +	struct pci_dev *dev;
> +
> +	/* PCI11x1x devices' PCIe topology consists of a top level pcie
> +	 * switch with up to four downstream ports, some of which have
> +	 * integrated endpoints connected to them. One of the downstream ports
> +	 * has an embedded single function pcie ethernet controller which is
> +	 * handled by this driver. Another downstream port has an
> +	 * embedded multifunction pcie endpoint, with four pcie functions
> +	 * (the "peripheral controllers": I2C controller, GPIO controller,
> +	 * UART controllers, SPIcontrollers)
> +	 * The code below navigates the PCI11x1x topology
> +	 * to find (by matching its PCI device ID) the peripheral controller
> +	 * that should be paired to the embedded ethernet controller.
> +	 */
> +	br_dev = pci_upstream_bridge(pdev);
> +	if (!br_dev) {
> +		netif_err(adapter, drv, adapter->netdev,
> +			  "upstream bridge not found\n");
> +		return br_dev;
> +	}
> +
> +	br_bus = br_dev->bus;
> +	list_for_each_entry(dev, &br_bus->devices, bus_list) {
> +		if (dev->vendor == PCI1XXXX_VENDOR_ID &&
> +		    (dev->device & ~PCI1XXXX_DEV_MASK) ==
> +		     PCI1XXXX_BR_PERIF_ID) {
> +			perif_bus = dev->subordinate;
> +			list_for_each_entry(perif_dev, &perif_bus->devices,
> +					    bus_list) {
> +				if (perif_dev->vendor == PCI1XXXX_VENDOR_ID &&
> +				    (perif_dev->device & ~PCI1XXXX_DEV_MASK) ==
> +				     perif_id)
> +					return pci_get_drvdata(perif_dev);
> +			}
> +		}
> +	}

It would be good to have the PCI Maintainers review of this. Maybe
pull this out into a patch of its own and Cc: Bjorn Helgaas
<bhelgaas@xxxxxxxxxx>

	Andrew