Re: [PATCH 0/2] Extending PLL LUT for i.MX8MP Samsung HDMI PHY
From: Frieder Schrempf
Date: Wed Sep 11 2024 - 15:03:30 EST
On 11.09.24 08:08, Dominique Martinet wrote:
Dominique Martinet wrote on Wed, Sep 11, 2024 at 09:23:31AM +0900:
so if I find some time I'll whip some loop to check all other values...
There were more differences than I thought there'd be (see diff below)
they're all minor enough to probably not care, but your script finds
exact values for them so it might be worth updating the regs if we keep
the table...
(OTOH these seem to work, and "if it works don't touch it" -- I have no
further opinion now I've checked, curiosity is sated)
Yeah, that's interesting. A lot of those values seem to be a little off.
Or my calculation has some problem, but it's unlikely as everything else
seems to add up so nicely.
The deviations seem very minor, only in the per mill ballpark or even
lower. I wonder how they got these values initially.
It would still be nice to verify the clocks with some real measurements
on the hardware level before we change the existing values.
On a side note, there is drivers/gpu/drm/exynos/exynos_hdmi.c which is
basically for the same kind of PHY, probably an older version of the IP
core. It also has some LUTs for the PLL registers. But I didn't compare
them so far.
Might want to just check 154000000 though, reg6's 0x80 was not set so
SDC was disabled? and it'd get the integer fraction (153600000) instead
if I understand this correctly
I think there are two switches. The fractional-N part can be enabled but
the sigma-delta-part can still be disabled. That's different than having
the fractional-N completely turned off.
My script doesn't cover this case. It assumes the SDC is always enabled
if the fractional-N is enabled.
The problem is that I don't know what part of the calculation is the SDC
value exactly. The reference manual is confusing and probably defective
in some way in regard to this. So I don't really know when to
enable/disable the SDC part.
For the 154 MHz this means even with SDC turned off the fractional-N
part will provide the 400 kHZ to be added to the integer part. At least
that's how I understand it. I might be wrong.
---------
diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
index a5ad51425ee3..72facc7bd045 100644
--- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -73,7 +73,7 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 24024000,
.pll_div_regs = { 0xd1, 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
}, {
- .pixclk = 25175000,
+ .pixclk = 25177981,
.pll_div_regs = { 0xd1, 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
}, {
.pixclk = 26750000,
@@ -82,16 +82,16 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 27027000,
.pll_div_regs = { 0xd1, 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
}, {
- .pixclk = 29500000,
+ .pixclk = 29487500,
.pll_div_regs = { 0xd1, 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
}, {
- .pixclk = 30750000,
+ .pixclk = 30729661,
.pll_div_regs = { 0xd1, 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
}, {
- .pixclk = 30888000,
+ .pixclk = 30848949,
.pll_div_regs = { 0xd1, 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
}, {
- .pixclk = 33750000,
+ .pixclk = 33731250,
.pll_div_regs = { 0xd1, 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
}, {
.pixclk = 35000000,
@@ -106,13 +106,13 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 44500000,
.pll_div_regs = { 0xd1, 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
}, {
- .pixclk = 47000000,
+ .pixclk = 47005000,
.pll_div_regs = { 0xd1, 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
}, {
- .pixclk = 47500000,
+ .pixclk = 47502000,
.pll_div_regs = { 0xd1, 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
}, {
- .pixclk = 50349650,
+ .pixclk = 50355924,
.pll_div_regs = { 0xd1, 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
}, {
.pixclk = 53250000,
@@ -124,16 +124,16 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 54054000,
.pll_div_regs = { 0xd1, 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
}, {
- .pixclk = 59000000,
+ .pixclk = 58975000,
.pll_div_regs = { 0xd1, 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
}, {
- .pixclk = 59340659,
+ .pixclk = 59264777,
.pll_div_regs = { 0xd1, 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
}, {
- .pixclk = 61500000,
+ .pixclk = 61459322,
.pll_div_regs = { 0xd1, 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
}, {
- .pixclk = 63500000,
+ .pixclk = 63437500,
.pll_div_regs = { 0xd1, 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
}, {
.pixclk = 67500000,
@@ -145,25 +145,25 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 72072000,
.pll_div_regs = { 0xd1, 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
}, {
- .pixclk = 74176000,
+ .pixclk = 74175824,
.pll_div_regs = { 0xd1, 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
}, {
.pixclk = 74250000,
.pll_div_regs = { 0xd1, 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
}, {
- .pixclk = 78500000,
+ .pixclk = 78487500,
.pll_div_regs = { 0xd1, 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
}, {
- .pixclk = 82000000,
+ .pixclk = 81945763,
.pll_div_regs = { 0xd1, 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
}, {
- .pixclk = 82500000,
+ .pixclk = 82486555,
.pll_div_regs = { 0xd1, 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
}, {
- .pixclk = 89000000,
+ .pixclk = 89075000,
.pll_div_regs = { 0xd1, 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
}, {
- .pixclk = 90000000,
+ .pixclk = 89950000,
.pll_div_regs = { 0xd1, 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
}, {
.pixclk = 94000000,
@@ -178,7 +178,7 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 99000000,
.pll_div_regs = { 0xd1, 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
}, {
- .pixclk = 100699300,
+ .pixclk = 100711847,
.pll_div_regs = { 0xd1, 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
}, {
.pixclk = 102500000,
@@ -196,16 +196,16 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 108108000,
.pll_div_regs = { 0xd1, 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
}, {
- .pixclk = 118000000,
+ .pixclk = 117950000,
.pll_div_regs = { 0xd1, 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
}, {
- .pixclk = 123000000,
+ .pixclk = 122918644,
.pll_div_regs = { 0xd1, 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
}, {
- .pixclk = 127000000,
+ .pixclk = 126875000,
.pll_div_regs = { 0xd1, 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
}, {
- .pixclk = 135000000,
+ .pixclk = 134925000,
.pll_div_regs = { 0xd1, 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
}, {
.pixclk = 135580000,
@@ -214,20 +214,20 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 137520000,
.pll_div_regs = { 0xd1, 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
}, {
- .pixclk = 138750000,
+ .pixclk = 138658397,
.pll_div_regs = { 0xd1, 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
}, {
- .pixclk = 140000000,
+ .pixclk = 140040000,
.pll_div_regs = { 0xd1, 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
}, {
- .pixclk = 148352000,
+ .pixclk = 148265128,
.pll_div_regs = { 0xd1, 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
}, {
- .pixclk = 148500000,
+ .pixclk = 148396403,
.pll_div_regs = { 0xd1, 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
}, {
.pixclk = 154000000,
- .pll_div_regs = { 0xd1, 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
+ .pll_div_regs = { 0xd1, 0x40, 0x18, 0x83, 0x01, 0x80, 0x40 },
}, {
.pixclk = 157000000,
.pll_div_regs = { 0xd1, 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
@@ -268,10 +268,10 @@ static const struct phy_config phy_pll_cfg[] = {
.pixclk = 254000000,
.pll_div_regs = { 0xd1, 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
}, {
- .pixclk = 277500000,
+ .pixclk = 277316794,
.pll_div_regs = { 0xd1, 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
}, {
- .pixclk = 297000000,
+ .pixclk = 296792806,
.pll_div_regs = { 0xd1, 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
},
};
-------------