[PATCH V10 net-next 00/10] Add support of HIBMCGE Ethernet Driver

From: Jijie Shao
Date: Wed Sep 11 2024 - 22:57:46 EST


This patch set adds the support of Hisilicon BMC Gigabit Ethernet Driver.

This patch set includes basic Rx/Tx functionality. It also includes
the registration and interrupt codes.

This work provides the initial support to the HIBMCGE and
would incrementally add features or enhancements.

---
ChangeLog:
v9 -> v10:
- Drop patch "add ndo_validate_addr check in dev_set_mac_address"
- Add validation for mac address in hbg_net_set_mac_address()
- Add "select MOTORCOMM_PHY" and "select REALTEK_PHY" in Kconfig.
- Use ETH_DATA_LEN instead of HBG_DEFAULT_MTU_SIZE, suggested by Andrew.
- Delete error description about genphy in commit log, suggested by Andrew.
v9: https://lore.kernel.org/all/20240910075942.1270054-1-shaojijie@xxxxxxxxxx/
v8 -> v9:
- Remove HBG_NIC_STATE_OPEN in ndo.open() and ndo.stop(),
suggested by Kalesh and Andrew
v8: https://lore.kernel.org/all/20240909023141.3234567-1-shaojijie@xxxxxxxxxx/
v7 -> v8:
- Set netdev->pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS, suggested by Jakub
v7: https://lore.kernel.org/all/20240905143120.1583460-1-shaojijie@xxxxxxxxxx/
v6 -> v7:
- Move the define inside the function body to the top of the .c file,
suggested by Paolo and Andrew.
- Respect the reverse x-mas tree order, suggested by Paolo.
- Add check for netif_txq_maybe_stop(), suggested by Paolo.
- Use dev_sw_netstats_tx_add() instead of dev->stats, suggested by Paolo.
- Modify net_dev to netdev, suggested by Paolo.
v6: https://lore.kernel.org/all/20240830121604.2250904-12-shaojijie@xxxxxxxxxx/
v5 -> v6:
- Delete netif_carrier_off() in .ndo_open() and .ndo_stop(),
suggested by Jakub and Andrew.
- Remove hbg_txrx_init() from probe path, alloc ring buffer in .ndo_open(),
and release ring buffer in .ndo_stop(), suggested by Jakub and Andrew.
v5: https://lore.kernel.org/all/20240827131455.2919051-1-shaojijie@xxxxxxxxxx/
v4 -> v5:
- Delete unnecessary semicolon, suggested by Jakub.
v4: https://lore.kernel.org/all/20240826081258.1881385-1-shaojijie@xxxxxxxxxx/
v3 -> v4:
- Delete INITED_STATE in priv, suggested by Andrew.
- Delete unnecessary defensive code in hbg_phy_start()
and hbg_phy_stop(), suggested by Andrew.
v3: https://lore.kernel.org/all/20240822093334.1687011-1-shaojijie@xxxxxxxxxx/
v2 -> v3:
- Add "select PHYLIB" in Kconfig, reported by Jakub.
- Use ndo_validate_addr() instead of is_valid_ether_addr()
in dev_set_mac_address(), suggested by Jakub and Andrew.
v2: https://lore.kernel.org/all/20240820140154.137876-1-shaojijie@xxxxxxxxxx/
v1 -> v2:
- fix build errors reported by kernel test robot <lkp@xxxxxxxxx>
Closes: https://lore.kernel.org/oe-kbuild-all/202408192219.zrGff7n1-lkp@xxxxxxxxx/
Closes: https://lore.kernel.org/oe-kbuild-all/202408200026.q20EuSHC-lkp@xxxxxxxxx/
v1: https://lore.kernel.org/all/20240819071229.2489506-1-shaojijie@xxxxxxxxxx/
RFC v2 -> v1:
- Use FIELD_PREP/FIELD_GET instead of union, suggested by Andrew.
- Delete unnecessary defensive code, suggested by Andrew.
- A few other minor changes.
RFC v2: https://lore.kernel.org/all/20240813135640.1694993-1-shaojijie@xxxxxxxxxx/
RFC v1 -> RFC v2:
- Replace linkmode_copy() with phy_remove_link_mode() to
simplify the PHY configuration process, suggested by Andrew.
- Delete hbg_get_link_status() from the scheduled task, suggested by Andrew.
- Delete validation for mtu in hbg_net_change_mtu(), suggested by Andrew.
- Delete validation for mac address in hbg_net_set_mac_address(),
suggested by Andrew.
- Use napi_complete_done() to simplify the process, suggested by Joe Damato.
- Use ethtool_op_get_link(), phy_ethtool_get_link_ksettings(),
and phy_ethtool_set_link_ksettings() to simplify the code, suggested by Andrew.
- Add the check on the return value of phy_connect_direct(),
suggested by Jonathan.
- Adjusted the layout to place the fields and register definitions
in one place, suggested by Jonathan.
- Replace request_irq with devm_request_irq, suggested by Jonathan.
- Replace BIT_MASK() with BIT(), suggested by Jonathan.
- Introduce irq_handle in struct hbg_irq_info in advance to reduce code changes,
suggested by Jonathan.
- Delete workqueue for this patch set, suggested by Jonathan.
- Support to compile this driver on all arch in Kconfig,
suggested by Andrew and Jonathan.
- Add a patch to add is_valid_ether_addr check in dev_set_mac_address,
suggested by Andrew.
- A few other minor changes.
RFC v1: https://lore.kernel.org/all/20240731094245.1967834-1-shaojijie@xxxxxxxxxx/
---

Jijie Shao (10):
net: hibmcge: Add pci table supported in this module
net: hibmcge: Add read/write registers supported through the bar space
net: hibmcge: Add mdio and hardware configuration supported in this
module
net: hibmcge: Add interrupt supported in this module
net: hibmcge: Implement some .ndo functions
net: hibmcge: Implement .ndo_start_xmit function
net: hibmcge: Implement rx_poll function to receive packets
net: hibmcge: Implement some ethtool_ops functions
net: hibmcge: Add a Makefile and update Kconfig for hibmcge
net: hibmcge: Add maintainer for hibmcge

MAINTAINERS | 7 +
drivers/net/ethernet/hisilicon/Kconfig | 18 +-
drivers/net/ethernet/hisilicon/Makefile | 1 +
.../net/ethernet/hisilicon/hibmcge/Makefile | 10 +
.../ethernet/hisilicon/hibmcge/hbg_common.h | 133 ++++++
.../ethernet/hisilicon/hibmcge/hbg_ethtool.c | 17 +
.../ethernet/hisilicon/hibmcge/hbg_ethtool.h | 11 +
.../net/ethernet/hisilicon/hibmcge/hbg_hw.c | 279 ++++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_hw.h | 59 +++
.../net/ethernet/hisilicon/hibmcge/hbg_irq.c | 125 ++++++
.../net/ethernet/hisilicon/hibmcge/hbg_irq.h | 11 +
.../net/ethernet/hisilicon/hibmcge/hbg_main.c | 267 +++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_mdio.c | 244 ++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_mdio.h | 12 +
.../net/ethernet/hisilicon/hibmcge/hbg_reg.h | 143 ++++++
.../net/ethernet/hisilicon/hibmcge/hbg_txrx.c | 420 ++++++++++++++++++
.../net/ethernet/hisilicon/hibmcge/hbg_txrx.h | 37 ++
17 files changed, 1793 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/Makefile
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_common.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_ethtool.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_irq.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_irq.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_main.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_mdio.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_mdio.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_reg.h
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.c
create mode 100644 drivers/net/ethernet/hisilicon/hibmcge/hbg_txrx.h

--
2.33.0