Re: [PATCH RESEND v27 2/3] reset: npcm: register npcm8xx clock auxiliary bus device
From: Tomer Maimon
Date: Thu Sep 12 2024 - 15:18:40 EST
Hi Philipp,
Thanks for your review.
Done in Version 28 :-)
Best regards,
Tomer
On Thu, 12 Sept 2024 at 18:18, Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
>
> On Do, 2024-08-15 at 18:02 +0300, Tomer Maimon wrote:
> > Add NPCM8xx clock controller auxiliary bus device registration.
> >
> > The NPCM8xx clock controller is registered as an aux device because the
> > reset and the clock controller share the same register region.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> > Tested-by: Benjamin Fair <benjaminfair@xxxxxxxxxx>
> > ---
> > drivers/reset/Kconfig | 1 +
> > drivers/reset/reset-npcm.c | 74 ++++++++++++++++++++++++++++-
> > include/soc/nuvoton/clock-npcm8xx.h | 16 +++++++
> > 3 files changed, 90 insertions(+), 1 deletion(-)
> > create mode 100755 include/soc/nuvoton/clock-npcm8xx.h
> >
> > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> > index 67bce340a87e..c6bf5275cca2 100644
> > --- a/drivers/reset/Kconfig
> > +++ b/drivers/reset/Kconfig
> > @@ -157,6 +157,7 @@ config RESET_MESON_AUDIO_ARB
> > config RESET_NPCM
> > bool "NPCM BMC Reset Driver" if COMPILE_TEST
> > default ARCH_NPCM
> > + select AUXILIARY_BUS
> > help
> > This enables the reset controller driver for Nuvoton NPCM
> > BMC SoCs.
> > diff --git a/drivers/reset/reset-npcm.c b/drivers/reset/reset-npcm.c
> > index 8935ef95a2d1..aa68b947226a 100644
> > --- a/drivers/reset/reset-npcm.c
> > +++ b/drivers/reset/reset-npcm.c
> > @@ -1,6 +1,7 @@
> > // SPDX-License-Identifier: GPL-2.0
> > // Copyright (c) 2019 Nuvoton Technology corporation.
> >
> > +#include <linux/auxiliary_bus.h>
> > #include <linux/delay.h>
> > #include <linux/err.h>
> > #include <linux/io.h>
> > @@ -10,11 +11,14 @@
> > #include <linux/property.h>
> > #include <linux/reboot.h>
> > #include <linux/reset-controller.h>
> > +#include <linux/slab.h>
> > #include <linux/spinlock.h>
> > #include <linux/mfd/syscon.h>
> > #include <linux/regmap.h>
> > #include <linux/of_address.h>
> >
> > +#include <soc/nuvoton/clock-npcm8xx.h>
> > +
> > /* NPCM7xx GCR registers */
> > #define NPCM_MDLR_OFFSET 0x7C
> > #define NPCM7XX_MDLR_USBD0 BIT(9)
> > @@ -89,6 +93,7 @@ struct npcm_rc_data {
> > const struct npcm_reset_info *info;
> > struct regmap *gcr_regmap;
> > u32 sw_reset_number;
> > + struct device *dev;
> > void __iomem *base;
> > spinlock_t lock;
> > };
> > @@ -372,6 +377,67 @@ static const struct reset_control_ops npcm_rc_ops = {
> > .status = npcm_rc_status,
> > };
> >
> > +static void npcm_clock_unregister_adev(void *_adev)
> > +{
> > + struct auxiliary_device *adev = _adev;
> > +
> > + auxiliary_device_delete(adev);
> > + auxiliary_device_uninit(adev);
> > +}
> > +
> > +static void npcm_clock_adev_release(struct device *dev)
> > +{
> > + struct auxiliary_device *adev = to_auxiliary_dev(dev);
> > + struct npcm_clock_adev *rdev = to_npcm_clock_adev(adev);
> > +
> > + kfree(rdev);
> > +}
> > +
> > +static struct auxiliary_device *npcm_clock_adev_alloc(struct npcm_rc_data *rst_data, char *clk_name)
> > +{
> > + struct npcm_clock_adev *rdev;
> > + struct auxiliary_device *adev;
> > + int ret;
> > +
> > + rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
> > + if (!rdev)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + rdev->base = rst_data->base;
> > +
> > + adev = &rdev->adev;
> > + adev->name = clk_name;
> > + adev->dev.parent = rst_data->dev;
> > + adev->dev.release = npcm_clock_adev_release;
> > + adev->id = 555u;
> > +
> > + ret = auxiliary_device_init(adev);
> > + if (ret) {
> > + kfree(rdev);
> > + return ERR_PTR(ret);
> > + }
> > +
> > + return adev;
> > +}
> > +
> > +static int npcm8xx_clock_controller_register(struct npcm_rc_data *rst_data, char *clk_name)
> > +{
> > + struct auxiliary_device *adev;
> > + int ret;
> > +
> > + adev = npcm_clock_adev_alloc(rst_data, clk_name);
> > + if (IS_ERR(adev))
> > + return PTR_ERR(adev);
> > +
> > + ret = auxiliary_device_add(adev);
> > + if (ret) {
> > + auxiliary_device_uninit(adev);
> > + return ret;
> > + }
> > +
> > + return devm_add_action_or_reset(rst_data->dev, npcm_clock_unregister_adev, adev);
> > +}
> > +
> > static int npcm_rc_probe(struct platform_device *pdev)
> > {
> > struct npcm_rc_data *rc;
> > @@ -392,6 +458,7 @@ static int npcm_rc_probe(struct platform_device *pdev)
> > rc->rcdev.of_node = pdev->dev.of_node;
> > rc->rcdev.of_reset_n_cells = 2;
> > rc->rcdev.of_xlate = npcm_reset_xlate;
> > + rc->dev = &pdev->dev;
> >
> > ret = devm_reset_controller_register(&pdev->dev, &rc->rcdev);
> > if (ret) {
> > @@ -413,7 +480,12 @@ static int npcm_rc_probe(struct platform_device *pdev)
> > }
> > }
> >
> > - return ret;
> > + switch (rc->info->bmc_id) {
> > + case BMC_NPCM8XX:
>
> Here ret is ignored, which may be the return value from
> register_restart_handler() above.
>
> > + return npcm8xx_clock_controller_register(rc, "clk-npcm8xx");
> > + default:
> > + return ret;
> > + }
> > }
> >
> > static struct platform_driver npcm_rc_driver = {
> > diff --git a/include/soc/nuvoton/clock-npcm8xx.h b/include/soc/nuvoton/clock-npcm8xx.h
> > new file mode 100755
> > index 000000000000..139130e98c51
> > --- /dev/null
> > +++ b/include/soc/nuvoton/clock-npcm8xx.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +#ifndef __SOC_NPCM8XX_CLOCK_H
> > +#define __SOC_NPCM8XX_CLOCK_H
> > +
> > +#include <linux/auxiliary_bus.h>
> > +#include <linux/container_of.h>
> > +
> > +struct npcm_clock_adev {
> > + void __iomem *base;
> > + struct auxiliary_device adev;
> > +};
> > +
> > +#define to_npcm_clock_adev(_adev) \
> > + container_of((_adev), struct npcm_clock_adev, adev)
>
> Could you make this an inline function instead?
>
> With those two issues addressed,
>
> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
>
> regards
> Philipp