Re: [PATCH v2] iTCO_wdt: mask NMI_NOW bit for update_no_reboot_bit() call

From: Guenter Roeck
Date: Thu Sep 12 2024 - 17:15:41 EST


On 9/12/24 07:19, Oleksandr Ocheretnyi wrote:
Commit da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake
PCH iTCO") does not mask NMI_NOW bit during TCO1_CNT register's
value comparison for update_no_reboot_bit() call causing following
failure:

...
iTCO_vendor_support: vendor-support=0
iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
...

and this can lead to unexpected NMIs later during regular
crashkernel's workflow because of watchdog probe call failures.

This change masks NMI_NOW bit for TCO1_CNT register values to
avoid unexpected NMI_NOW bit inversions.

Fixes: da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@xxxxxxxxx>
---
drivers/watchdog/iTCO_wdt.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 264857d314da..46c09359588f 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -82,6 +82,12 @@
#define TCO2_CNT(p) (TCOBASE(p) + 0x0a) /* TCO2 Control Register */
#define TCOv2_TMR(p) (TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/
+/* NMI_NOW is bit 8 of TCO1_CNT register
+ * Read/Write
+ * This bit is implemented as RW but has no effect on HW.
+ */
+#define NMI_NOW BIT(8)
+
/* internal variables */
struct iTCO_wdt_private {
struct watchdog_device wddev;
@@ -217,15 +223,24 @@ static int update_no_reboot_bit_mem(void *priv, bool set)
static int update_no_reboot_bit_cnt(void *priv, bool set)
{
struct iTCO_wdt_private *p = priv;
- u16 val, newval;
-
- val = inw(TCO1_CNT(p));
+ u16 val, newval, mask = (~NMI_NOW);
+
Unnecessary (). Either case, please just mask against ~NMI_NOW directly.
The mask variable is not necessary.

+ /* writing back 1b1 to NMI_NOW of TCO1_CNT register

Standard multi-line comments, please.

Thanks,
Guenter

+ * causes NMI_NOW bit inversion what consequently does
+ * not allow to perform the register's value comparison
+ * properly.
+ *
+ * NMI_NOW bit masking for TCO1_CNT register values
+ * helps to avoid possible NMI_NOW bit inversions on
+ * following write operation.
+ */
+ val = inw(TCO1_CNT(p)) & mask;
if (set)
val |= BIT(0);
else
val &= ~BIT(0);
outw(val, TCO1_CNT(p));
- newval = inw(TCO1_CNT(p));
+ newval = inw(TCO1_CNT(p)) & mask;
/* make sure the update is successful */
return val != newval ? -EIO : 0;