Re: [RFC 1/2] dt-bindings: connector: Add property to set pd timer values

[Amit Sunil Dhamne]

Hi Dmitry,

On 9/12/24 3:05 AM, Dmitry Baryshkov wrote:
> On Tue, Sep 10, 2024 at 05:07:05PM GMT, Amit Sunil Dhamne wrote:
> > This commit adds a new property "pd-timers" to enable setting of
> > platform/board specific pd timer values for timers that have a range of
> > acceptable values.
> >
> > Cc: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
> > Cc: linux-usb@xxxxxxxxxxxxxxx
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Signed-off-by: Amit Sunil Dhamne <amitsd@xxxxxxxxxx>
> > ---
> >   .../bindings/connector/usb-connector.yaml     | 23 +++++++++++++++++++
> >   include/dt-bindings/usb/pd.h                  |  8 +++++++
> >   2 files changed, 31 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > index fb216ce68bb3..9be4ed12f13c 100644
> > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > @@ -253,6 +253,16 @@ properties:
> >   
> >       additionalProperties: false
> >   
> > +  pd-timers:
> > +    description: An array of u32 integers, where an even index (i) is the timer (referenced in
> > +      dt-bindings/usb/pd.h) and the odd index (i+1) is the timer value in ms (refer
> > +      "Table 6-68 Time Values" of "USB Power Delivery Specification Revision 3.0, Version 1.2 " for
> > +      the appropriate value). For certain timers the PD spec defines a range rather than a fixed
> > +      value. The timers may need to be tuned based on the platform. This dt property allows the user
> > +      to assign specific values based on the platform. If these values are not explicitly defined,
> > +      TCPM will use a valid default value for such timers.
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> Is it really necessary to use the array property? I think it's easier
> and more logical to define corresponding individual properties, one per
> the timer.

Thanks for the review. The reason I did it this way was for
convenience. If in the future someone else wants add a new timer,
it'd be convenient to just add it as a new macro definition in pd.h
rather than having to define a new property each time, especially
if folks want to add more timers (scales better).
There are 3 timers already and I am working to add a fourth in a
follow up patch if the current RFC gets accepted.

Please let me know what do you think?

Regards,

Amit

> > +
> >   dependencies:
> >     sink-vdos-v1: [ sink-vdos ]
> >     sink-vdos: [ sink-vdos-v1 ]
> > @@ -478,3 +488,16 @@ examples:
> >               };
> >           };
> >       };
> > +
> > +  # USB-C connector with PD timers
> > +  - |
> > +    #include <dt-bindings/usb/pd.h>
> > +    usb {
> > +        connector {
> > +            compatible = "usb-c-connector";
> > +            label = "USB-C";
> > +            pd-timers =
> > +                <PD_TIMER_SINK_WAIT_CAP 600>,
> > +                <PD_TIMER_CC_DEBOUNCE 170>;
> > +        };
> > +    };
> > diff --git a/include/dt-bindings/usb/pd.h b/include/dt-bindings/usb/pd.h
> > index e6526b138174..6c58c30f3f39 100644
> > --- a/include/dt-bindings/usb/pd.h
> > +++ b/include/dt-bindings/usb/pd.h
> > @@ -465,4 +465,12 @@
> >   	 | ((vbm) & 0x3) << 15 | (curr) << 14 | ((vbi) & 0x3f) << 7	\
> >   	 | ((gi) & 0x3f) << 1 | (ct))
> >   
> > +/* PD Timer definitions */
> > +/* tTypeCSinkWaitCap (Table 6-68 Time Values, USB PD3.1 Spec) */
> > +#define PD_TIMER_SINK_WAIT_CAP		0
> > +/* tPSSourceOff (Table 6-68 Time Values, USB PD3.1 Spec) */
> > +#define PD_TIMER_PS_SOURCE_OFF		1
> > +/* tCCDebounce (Table 4-33 CC Timing, USB Type-C Cable & Connector Spec Rel2.2) */
> > +#define PD_TIMER_CC_DEBOUNCE		2
> > +
> >   #endif /* __DT_POWER_DELIVERY_H */
> > --
> > 2.46.0.598.g6f2099f65c-goog