[PATCH v2 3/3] iio: light: opt3001: add support for TI's opt3002 light sensor
From: Emil Gedenryd
Date: Fri Sep 13 2024 - 05:58:19 EST
TI's opt3002 light sensor shares most properties with the opt3001
model, with the exception of supporting a wider spectrum range.
Add support for TI's opt3002 by extending the TI opt3001 driver.
Datasheet: https://www.ti.com/product/OPT3002
Signed-off-by: Emil Gedenryd <emil.gedenryd@xxxxxxxx>
---
drivers/iio/light/Kconfig | 2 +-
drivers/iio/light/opt3001.c | 169 +++++++++++++++++++++++++++++++++++---------
2 files changed, 138 insertions(+), 33 deletions(-)
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index b68dcc1fbaca..c35bf962dae6 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -461,7 +461,7 @@ config OPT3001
depends on I2C
help
If you say Y or M here, you get support for Texas Instruments
- OPT3001 Ambient Light Sensor.
+ OPT3001 Ambient Light Sensor, OPT3002 Light-to-Digital Sensor.
If built as a dynamically linked module, it will be called
opt3001.
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index 176e54bb48c3..83c49f4517b7 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -70,6 +70,21 @@
#define OPT3001_RESULT_READY_SHORT 150
#define OPT3001_RESULT_READY_LONG 1000
+struct opt3001_scale {
+ int val;
+ int val2;
+};
+
+struct opt300x_chip_info {
+ const struct iio_chan_spec (*channels)[2];
+ enum iio_chan_type chan_type;
+ const struct opt3001_scale (*scales)[12];
+ int factor_whole;
+ int factor_integer;
+ int factor_decimal;
+ bool has_id;
+};
+
struct opt3001 {
struct i2c_client *client;
struct device *dev;
@@ -79,6 +94,7 @@ struct opt3001 {
bool result_ready;
wait_queue_head_t result_ready_queue;
u16 result;
+ const struct opt300x_chip_info *chip_info;
u32 int_time;
u32 mode;
@@ -92,11 +108,6 @@ struct opt3001 {
bool use_irq;
};
-struct opt3001_scale {
- int val;
- int val2;
-};
-
static const struct opt3001_scale opt3001_scales[] = {
{
.val = 40,
@@ -148,21 +159,68 @@ static const struct opt3001_scale opt3001_scales[] = {
},
};
+static const struct opt3001_scale opt3002_scales[] = {
+ {
+ .val = 4914,
+ .val2 = 0,
+ },
+ {
+ .val = 9828,
+ .val2 = 0,
+ },
+ {
+ .val = 19656,
+ .val2 = 0,
+ },
+ {
+ .val = 39312,
+ .val2 = 0,
+ },
+ {
+ .val = 78624,
+ .val2 = 0,
+ },
+ {
+ .val = 157248,
+ .val2 = 0,
+ },
+ {
+ .val = 314496,
+ .val2 = 0,
+ },
+ {
+ .val = 628992,
+ .val2 = 0,
+ },
+ {
+ .val = 1257984,
+ .val2 = 0,
+ },
+ {
+ .val = 2515968,
+ .val2 = 0,
+ },
+ {
+ .val = 5031936,
+ .val2 = 0,
+ },
+ {
+ .val = 10063872,
+ .val2 = 0,
+ },
+};
+
static int opt3001_find_scale(const struct opt3001 *opt, int val,
int val2, u8 *exponent)
{
int i;
-
- for (i = 0; i < ARRAY_SIZE(opt3001_scales); i++) {
- const struct opt3001_scale *scale = &opt3001_scales[i];
-
+ for (i = 0; i < ARRAY_SIZE(*opt->chip_info->scales); i++) {
+ const struct opt3001_scale *scale = &(*opt->chip_info->scales)[i];
/*
- * Combine the integer and micro parts for comparison
- * purposes. Use milli lux precision to avoid 32-bit integer
- * overflows.
+ * Compare the integer and micro parts to determine value scale.
*/
- if ((val * 1000 + val2 / 1000) <=
- (scale->val * 1000 + scale->val2 / 1000)) {
+ if (val < scale->val ||
+ (val == scale->val && val2 <= scale->val2)) {
*exponent = i;
return 0;
}
@@ -174,11 +232,14 @@ static int opt3001_find_scale(const struct opt3001 *opt, int val,
static void opt3001_to_iio_ret(struct opt3001 *opt, u8 exponent,
u16 mantissa, int *val, int *val2)
{
- int lux;
+ int ret;
+ int whole = opt->chip_info->factor_whole;
+ int integer = opt->chip_info->factor_integer;
+ int decimal = opt->chip_info->factor_decimal;
- lux = 10 * (mantissa << exponent);
- *val = lux / 1000;
- *val2 = (lux - (*val * 1000)) * 1000;
+ ret = whole * (mantissa << exponent);
+ *val = ret / integer;
+ *val2 = (ret - (*val * integer)) * decimal;
}
static void opt3001_set_mode(struct opt3001 *opt, u16 *reg, u16 mode)
@@ -225,7 +286,18 @@ static const struct iio_chan_spec opt3001_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(1),
};
-static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
+static const struct iio_chan_spec opt3002_channels[] = {
+ {
+ .type = IIO_INTENSITY,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ .event_spec = opt3001_event_spec,
+ .num_event_specs = ARRAY_SIZE(opt3001_event_spec),
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int opt3001_get_processed(struct opt3001 *opt, int *val, int *val2)
{
int ret;
u16 mantissa;
@@ -397,14 +469,14 @@ static int opt3001_read_raw(struct iio_dev *iio,
if (opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS)
return -EBUSY;
- if (chan->type != IIO_LIGHT)
+ if (chan->type != opt->chip_info->chan_type)
return -EINVAL;
mutex_lock(&opt->lock);
switch (mask) {
case IIO_CHAN_INFO_PROCESSED:
- ret = opt3001_get_lux(opt, val, val2);
+ ret = opt3001_get_processed(opt, val, val2);
break;
case IIO_CHAN_INFO_INT_TIME:
ret = opt3001_get_int_time(opt, val, val2);
@@ -428,7 +500,7 @@ static int opt3001_write_raw(struct iio_dev *iio,
if (opt->mode == OPT3001_CONFIGURATION_M_CONTINUOUS)
return -EBUSY;
- if (chan->type != IIO_LIGHT)
+ if (chan->type != opt->chip_info->chan_type)
return -EINVAL;
if (mask != IIO_CHAN_INFO_INT_TIME)
@@ -479,6 +551,9 @@ static int opt3001_write_event_value(struct iio_dev *iio,
{
struct opt3001 *opt = iio_priv(iio);
int ret;
+ int whole;
+ int integer;
+ int decimal;
u16 mantissa;
u16 value;
@@ -497,7 +572,12 @@ static int opt3001_write_event_value(struct iio_dev *iio,
goto err;
}
- mantissa = (((val * 1000) + (val2 / 1000)) / 10) >> exponent;
+ whole = opt->chip_info->factor_whole;
+ integer = opt->chip_info->factor_integer;
+ decimal = opt->chip_info->factor_decimal;
+
+ mantissa = (((val * integer) + (val2 / decimal)) / whole) >> exponent;
+
value = (exponent << 12) | mantissa;
switch (dir) {
@@ -610,7 +690,7 @@ static int opt3001_read_id(struct opt3001 *opt)
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_DEVICE_ID);
if (ret < 0) {
dev_err(opt->dev, "failed to read register %02x\n",
- OPT3001_DEVICE_ID);
+ OPT3001_DEVICE_ID);
return ret;
}
@@ -692,6 +772,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
struct opt3001 *opt = iio_priv(iio);
int ret;
bool wake_result_ready_queue = false;
+ enum iio_chan_type chan_type = opt->chip_info->chan_type;
if (!opt->ok_to_ignore_lock)
mutex_lock(&opt->lock);
@@ -707,13 +788,13 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
OPT3001_CONFIGURATION_M_CONTINUOUS) {
if (ret & OPT3001_CONFIGURATION_FH)
iio_push_event(iio,
- IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+ IIO_UNMOD_EVENT_CODE(chan_type, 0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_RISING),
iio_get_time_ns(iio));
if (ret & OPT3001_CONFIGURATION_FL)
iio_push_event(iio,
- IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0,
+ IIO_UNMOD_EVENT_CODE(chan_type, 0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_FALLING),
iio_get_time_ns(iio));
@@ -746,7 +827,7 @@ static int opt3001_probe(struct i2c_client *client)
struct iio_dev *iio;
struct opt3001 *opt;
int irq = client->irq;
- int ret;
+ int ret = 0;
iio = devm_iio_device_alloc(dev, sizeof(*opt));
if (!iio)
@@ -755,12 +836,14 @@ static int opt3001_probe(struct i2c_client *client)
opt = iio_priv(iio);
opt->client = client;
opt->dev = dev;
+ opt->chip_info = device_get_match_data(&client->dev);
mutex_init(&opt->lock);
init_waitqueue_head(&opt->result_ready_queue);
i2c_set_clientdata(client, iio);
- ret = opt3001_read_id(opt);
+ if (opt->chip_info->has_id)
+ ret = opt3001_read_id(opt);
if (ret)
return ret;
@@ -769,8 +852,8 @@ static int opt3001_probe(struct i2c_client *client)
return ret;
iio->name = client->name;
- iio->channels = opt3001_channels;
- iio->num_channels = ARRAY_SIZE(opt3001_channels);
+ iio->channels = *opt->chip_info->channels;
+ iio->num_channels = ARRAY_SIZE(*opt->chip_info->channels);
iio->modes = INDIO_DIRECT_MODE;
iio->info = &opt3001_info;
@@ -825,14 +908,36 @@ static void opt3001_remove(struct i2c_client *client)
}
}
+static const struct opt300x_chip_info opt3001_chip_info = {
+ .channels = &opt3001_channels,
+ .chan_type = IIO_LIGHT,
+ .scales = &opt3001_scales,
+ .factor_whole = 10,
+ .factor_integer = 1000,
+ .factor_decimal = 1000,
+ .has_id = true,
+};
+
+static const struct opt300x_chip_info opt3002_chip_info = {
+ .channels = &opt3002_channels,
+ .chan_type = IIO_INTENSITY,
+ .scales = &opt3002_scales,
+ .factor_whole = 12,
+ .factor_integer = 10,
+ .factor_decimal = 100000,
+ .has_id = false,
+};
+
static const struct i2c_device_id opt3001_id[] = {
- { "opt3001" },
+ { "opt3001", (kernel_ulong_t)&opt3001_chip_info },
+ { "opt3002", (kernel_ulong_t)&opt3002_chip_info },
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(i2c, opt3001_id);
static const struct of_device_id opt3001_of_match[] = {
- { .compatible = "ti,opt3001" },
+ { .compatible = "ti,opt3001", .data = &opt3001_chip_info },
+ { .compatible = "ti,opt3002", .data = &opt3002_chip_info },
{ }
};
MODULE_DEVICE_TABLE(of, opt3001_of_match);
--
2.39.2