[PATCH v2 2/3] rtc: isl12022: Add alarm support

[Esben Haabendal]

The ISL12022 RTC has a combined INT/fOUT pin, which can be used for alarm
interrupt when frequency output is not enabled.

The device-tree bindings should ensure that interrupt and clock output is
not enabled at the same time.

Signed-off-by: Esben Haabendal <esben@xxxxxxxxxx>
---
 drivers/rtc/rtc-isl12022.c | 234 +++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 227 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-isl12022.c b/drivers/rtc/rtc-isl12022.c
index d82278fdc29b..8001e3c5da76 100644
--- a/drivers/rtc/rtc-isl12022.c
+++ b/drivers/rtc/rtc-isl12022.c
@@ -21,7 +21,7 @@
 
 #include <asm/byteorder.h>
 
-/* ISL register offsets */
+/* RTC - Real time clock registers */
 #define ISL12022_REG_SC		0x00
 #define ISL12022_REG_MN		0x01
 #define ISL12022_REG_HR		0x02
@@ -30,21 +30,36 @@
 #define ISL12022_REG_YR		0x05
 #define ISL12022_REG_DW		0x06
 
+/* CSR - Control and status registers */
 #define ISL12022_REG_SR		0x07
 #define ISL12022_REG_INT	0x08
-
 #define ISL12022_REG_PWR_VBAT	0x0a
-
 #define ISL12022_REG_BETA	0x0d
+
+/* ALARM - Alarm registers */
+#define ISL12022_REG_SCA0	0x10
+#define ISL12022_REG_MNA0	0x11
+#define ISL12022_REG_HRA0	0x12
+#define ISL12022_REG_DTA0	0x13
+#define ISL12022_REG_MOA0	0x14
+#define ISL12022_REG_DWA0	0x15
+#define ISL12022_ALARM		ISL12022_REG_SCA0
+#define ISL12022_ALARM_LEN	(ISL12022_REG_DWA0 - ISL12022_REG_SCA0 + 1)
+
+/* TEMP - Temperature sensor registers */
 #define ISL12022_REG_TEMP_L	0x28
 
 /* ISL register bits */
 #define ISL12022_HR_MIL		(1 << 7)	/* military or 24 hour time */
 
+#define ISL12022_SR_ALM		(1 << 4)
 #define ISL12022_SR_LBAT85	(1 << 2)
 #define ISL12022_SR_LBAT75	(1 << 1)
 
+#define ISL12022_INT_ARST	(1 << 7)
 #define ISL12022_INT_WRTC	(1 << 6)
+#define ISL12022_INT_IM		(1 << 5)
+#define ISL12022_INT_FOBATB	(1 << 4)
 #define ISL12022_INT_FO_MASK	GENMASK(3, 0)
 #define ISL12022_INT_FO_OFF	0x0
 #define ISL12022_INT_FO_32K	0x1
@@ -52,10 +67,17 @@
 #define ISL12022_REG_VB85_MASK	GENMASK(5, 3)
 #define ISL12022_REG_VB75_MASK	GENMASK(2, 0)
 
+#define ISL12022_ALARM_ENABLE	(1 << 7)	/* for all ALARM registers  */
+
 #define ISL12022_BETA_TSE	(1 << 7)
 
+static struct i2c_driver isl12022_driver;
+
 struct isl12022 {
+	struct rtc_device *rtc;
 	struct regmap *regmap;
+	int irq;
+	bool irq_enabled;
 };
 
 static umode_t isl12022_hwmon_is_visible(const void *data,
@@ -215,6 +237,194 @@ static int isl12022_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	return regmap_bulk_write(regmap, ISL12022_REG_SC, buf, sizeof(buf));
 }
 
+static int isl12022_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *tm = &alarm->time;
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
+	u8 buf[ISL12022_ALARM_LEN];
+	unsigned int i, yr;
+	int ret;
+
+	ret = regmap_bulk_read(regmap, ISL12022_ALARM, buf, sizeof(buf));
+	if (ret) {
+		dev_dbg(dev, "%s: reading ALARM registers failed\n",
+			__func__);
+		return ret;
+	}
+
+	/* The alarm doesn't store the year so get it from the rtc section */
+	ret = regmap_read(regmap, ISL12022_REG_YR, &yr);
+	if (ret) {
+		dev_dbg(dev, "%s: reading YR register failed\n", __func__);
+		return ret;
+	}
+
+	dev_dbg(dev,
+		"%s: sc=%02x, mn=%02x, hr=%02x, dt=%02x, mo=%02x, dw=%02x yr=%u\n",
+		__func__, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], yr);
+
+	tm->tm_sec  = bcd2bin(buf[ISL12022_REG_SCA0 - ISL12022_ALARM] & 0x7F);
+	tm->tm_min  = bcd2bin(buf[ISL12022_REG_MNA0 - ISL12022_ALARM] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[ISL12022_REG_HRA0 - ISL12022_ALARM] & 0x3F);
+	tm->tm_mday = bcd2bin(buf[ISL12022_REG_DTA0 - ISL12022_ALARM] & 0x3F);
+	tm->tm_mon  = bcd2bin(buf[ISL12022_REG_MOA0 - ISL12022_ALARM] & 0x1F) - 1;
+	tm->tm_wday = buf[ISL12022_REG_DWA0 - ISL12022_ALARM]         & 0x07;
+	tm->tm_year = bcd2bin(yr) + 100;
+
+	for (i = 0; i < ISL12022_ALARM_LEN; i++) {
+		if (buf[i] & ISL12022_ALARM_ENABLE) {
+			alarm->enabled = 1;
+			break;
+		}
+	}
+
+	dev_dbg(dev, "%s: %ptR\n", __func__, tm);
+
+	return 0;
+}
+
+static int isl12022_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct rtc_time *alarm_tm = &alarm->time;
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
+	u8 regs[ISL12022_ALARM_LEN] = { 0, };
+	struct rtc_time rtc_tm;
+	int ret, enable, dw;
+
+	ret = isl12022_rtc_read_time(dev, &rtc_tm);
+	if (ret)
+		return ret;
+
+	/* If the alarm time is before the current time disable the alarm */
+	if (!alarm->enabled || rtc_tm_sub(alarm_tm, &rtc_tm) <= 0)
+		enable = 0;
+	else
+		enable = ISL12022_ALARM_ENABLE;
+
+	/*
+	 * Set non-matching day of the week to safeguard against early false
+	 * matching while setting all the alarm registers (this rtc lacks a
+	 * general alarm/irq enable/disable bit).
+	 */
+	ret = regmap_read(regmap, ISL12022_REG_DW, &dw);
+	if (ret) {
+		dev_dbg(dev, "%s: reading DW failed\n", __func__);
+		return ret;
+	}
+	/* ~4 days into the future should be enough to avoid match */
+	dw = ((dw + 4) % 7) | ISL12022_ALARM_ENABLE;
+	ret = regmap_write(regmap, ISL12022_REG_DWA0, dw);
+	if (ret) {
+		dev_dbg(dev, "%s: writing DWA0 failed\n", __func__);
+		return ret;
+	}
+
+	/* Program the alarm and enable it for each setting */
+	regs[ISL12022_REG_SCA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_sec) | enable;
+	regs[ISL12022_REG_MNA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_min) | enable;
+	regs[ISL12022_REG_HRA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_hour) | enable;
+	regs[ISL12022_REG_DTA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_mday) | enable;
+	regs[ISL12022_REG_MOA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_mon + 1) | enable;
+	regs[ISL12022_REG_DWA0 - ISL12022_ALARM] = bin2bcd(alarm_tm->tm_wday & 7) | enable;
+
+	/* write ALARM registers */
+	ret = regmap_bulk_write(regmap, ISL12022_ALARM, &regs, sizeof(regs));
+	if (ret) {
+		dev_dbg(dev, "%s: writing ALARM registers failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t isl12022_rtc_interrupt(int irq, void *data)
+{
+	struct isl12022 *isl12022 = data;
+	struct rtc_device *rtc = isl12022->rtc;
+	struct device *dev = &rtc->dev;
+	struct regmap *regmap = isl12022->regmap;
+	u32 val = 0;
+	unsigned long events = 0;
+	int ret;
+
+	ret = regmap_read(regmap, ISL12022_REG_SR, &val);
+	if (ret) {
+		dev_dbg(dev, "%s: reading SR failed\n", __func__);
+		return IRQ_HANDLED;
+	}
+
+	if (val & ISL12022_SR_ALM)
+		events |= RTC_IRQF | RTC_AF;
+
+	if (events & RTC_AF)
+		dev_dbg(dev, "alarm!\n");
+
+	if (!events)
+		return IRQ_NONE;
+
+	rtc_update_irq(rtc, 1, events);
+	return IRQ_HANDLED;
+}
+
+static int isl12022_rtc_alarm_irq_enable(struct device *dev,
+					 unsigned int enabled)
+{
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+
+	/* Make sure enabled is 0 or 1 */
+	enabled = !!enabled;
+
+	if (isl12022->irq_enabled == enabled)
+		return 0;
+
+	if (enabled)
+		enable_irq(isl12022->irq);
+	else
+		disable_irq(isl12022->irq);
+
+	isl12022->irq_enabled = enabled;
+
+	return 0;
+}
+
+static int isl12022_setup_irq(struct device *dev, int irq)
+{
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
+	unsigned int reg_mask, reg_val;
+	u8 buf[ISL12022_ALARM_LEN] = { 0, };
+	int ret;
+
+	/* Clear and disable all alarm registers */
+	ret = regmap_bulk_write(regmap, ISL12022_ALARM, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable automatic reset of ALM bit and enable single event interrupt
+	 * mode.
+	 */
+	reg_mask = ISL12022_INT_ARST | ISL12022_INT_IM | ISL12022_INT_FO_MASK;
+	reg_val = ISL12022_INT_ARST | ISL12022_INT_FO_OFF;
+	ret = regmap_write_bits(regmap, ISL12022_REG_INT,
+				reg_mask, reg_val);
+	if (ret)
+		return ret;
+
+	ret = devm_request_threaded_irq(dev, irq, NULL,
+					isl12022_rtc_interrupt,
+					IRQF_SHARED | IRQF_ONESHOT,
+					isl12022_driver.driver.name,
+					isl12022);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to request irq %d\n", irq);
+
+	isl12022->irq = irq;
+	return 0;
+}
+
 static int isl12022_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	struct isl12022 *isl12022 = dev_get_drvdata(dev);
@@ -246,6 +456,9 @@ static const struct rtc_class_ops isl12022_rtc_ops = {
 	.ioctl		= isl12022_rtc_ioctl,
 	.read_time	= isl12022_rtc_read_time,
 	.set_time	= isl12022_rtc_set_time,
+	.read_alarm	= isl12022_rtc_read_alarm,
+	.set_alarm	= isl12022_rtc_set_alarm,
+	.alarm_irq_enable = isl12022_rtc_alarm_irq_enable,
 };
 
 static const struct regmap_config regmap_config = {
@@ -349,10 +562,8 @@ static int isl12022_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	regmap = devm_regmap_init_i2c(client, &regmap_config);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "regmap allocation failed\n");
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap), "regmap allocation failed\n");
 	isl12022->regmap = regmap;
 
 	dev_set_drvdata(&client->dev, isl12022);
@@ -367,11 +578,20 @@ static int isl12022_probe(struct i2c_client *client)
 	rtc = devm_rtc_allocate_device(&client->dev);
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
+	isl12022->rtc = rtc;
 
 	rtc->ops = &isl12022_rtc_ops;
 	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 	rtc->range_max = RTC_TIMESTAMP_END_2099;
 
+	if (client->irq > 0) {
+		ret = isl12022_setup_irq(&client->dev, client->irq);
+		if (ret)
+			return ret;
+	} else {
+		clear_bit(RTC_FEATURE_ALARM, rtc->features);
+	}
+
 	return devm_rtc_register_device(rtc);
 }
 

-- 
2.46.0