Re: [PATCH v2 1/2] arm64: dts: ti: k3-j784s4-evm: Mark tps659413 regulators as bootph-all

[Beleswar Prasad Padhi]

Hi Andrew,

On 11/09/24 22:49, Andrew Halaney wrote:
> In order for the MCU domain to access this PMIC, a regulator
> needs to be marked appropriately otherwise it is not seen by SPL and
> therefore not configured.
>
> This is necessary if the MCU domain is to program the TPS6594 MCU ESM
> state machine, which is required to wire up the watchdog in a manner
> that will reset the board.
>
> Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index 6695ebbcb4d0..6ed628c2884e 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -663,6 +663,7 @@ tps659413: pmic@48 {
>   
>   		regulators {
>   			bucka12: buck12 {
> +				bootph-all;
>   				regulator-name = "vdd_ddr_1v1";
>   				regulator-min-microvolt = <1100000>;
>   				regulator-max-microvolt = <1100000>;


In my opinion, bootph-all property should come after other standard 
properties like regulator-name etc., as it is least important to Linux. 
Same comment for other nodes wherever applicable. What is your opinion?


https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n130


Thanks,

Beleswar

> @@ -671,6 +672,7 @@ bucka12: buck12 {
>   			};
>   
>   			bucka3: buck3 {
> +				bootph-all;
>   				regulator-name = "vdd_ram_0v85";
>   				regulator-min-microvolt = <850000>;
>   				regulator-max-microvolt = <850000>;
> @@ -679,6 +681,7 @@ bucka3: buck3 {
>   			};
>   
>   			bucka4: buck4 {
> +				bootph-all;
>   				regulator-name = "vdd_io_1v8";
>   				regulator-min-microvolt = <1800000>;
>   				regulator-max-microvolt = <1800000>;
> @@ -687,6 +690,7 @@ bucka4: buck4 {
>   			};
>   
>   			bucka5: buck5 {
> +				bootph-all;
>   				regulator-name = "vdd_mcu_0v85";
>   				regulator-min-microvolt = <850000>;
>   				regulator-max-microvolt = <850000>;
> @@ -695,6 +699,7 @@ bucka5: buck5 {
>   			};
>   
>   			ldoa1: ldo1 {
> +				bootph-all;
>   				regulator-name = "vdd_mcuio_1v8";
>   				regulator-min-microvolt = <1800000>;
>   				regulator-max-microvolt = <1800000>;
> @@ -703,6 +708,7 @@ ldoa1: ldo1 {
>   			};
>   
>   			ldoa2: ldo2 {
> +				bootph-all;
>   				regulator-name = "vdd_mcuio_3v3";
>   				regulator-min-microvolt = <3300000>;
>   				regulator-max-microvolt = <3300000>;
> @@ -711,6 +717,7 @@ ldoa2: ldo2 {
>   			};
>   
>   			ldoa3: ldo3 {
> +				bootph-all;
>   				regulator-name = "vds_dll_0v8";
>   				regulator-min-microvolt = <800000>;
>   				regulator-max-microvolt = <800000>;
> @@ -719,6 +726,7 @@ ldoa3: ldo3 {
>   			};
>   
>   			ldoa4: ldo4 {
> +				bootph-all;
>   				regulator-name = "vda_mcu_1v8";
>   				regulator-min-microvolt = <1800000>;
>   				regulator-max-microvolt = <1800000>;