[PATCH v7 0/4] Add support for AArch64 AMUv1-based average freq

From: Beata Michalska
Date: Fri Sep 13 2024 - 09:30:18 EST


Hi All,

This series adds support for obtaining an average CPU frequency based on
a hardware provided feedback. The average frequency is being exposed via
dedicated yet optional cpufreq sysfs attribute - cpuinfo_avg_freq.
The architecture specific bits are being provided for AArch64, caching on
existing implementation for FIE and AMUv1 support: the frequency scale
factor, updated on each sched tick, serving as a base for retrieving
the frequency for a given CPU, representing an average frequency
reported between the ticks.

The changes have been rather lightly (due to some limitations) tested on
an FVP model. Note that some small discrepancies have been observed while
testing (on the model) and this is currently being investigated, though it
should not have any significant impact on the overall results.

Note that [PATCH 2/4] arm64: amu: Delay allocating cpumask for AMU FIE support
can be merged independently.

Relevant discussions:
[1] https://lore.kernel.org/all/20240229162520.970986-1-vanshikonda@xxxxxxxxxxxxxxxxxxxxxx/
[2] https://lore.kernel.org/all/7eozim2xnepacnnkzxlbx34hib4otycnbn4dqymfziqou5lw5u@5xzpv3t7sxo3/
[3] https://lore.kernel.org/all/20231212072617.14756-1-lihuisong@xxxxxxxxxx/
[4] https://lore.kernel.org/lkml/ZIHpd6unkOtYVEqP@xxxxxxxxxxxxxxxxxxxxxxxxx/T/#m4e74cb5a0aaa353c60fedc6cfb95ab7a6e381e3c
[5] https://lore.kernel.org/all/20240603081331.3829278-1-beata.michalska@xxxxxxx/


v7:
- Dropping 'arch_topology: init capacity_freq_ref to 0' patch from the series
as this one has been sent separately as an independent change
[https://lore.kernel.org/all/20240827154818.1195849-1-ionela.voinescu@xxxxxxx/]
- Including in the series change that introduces new sysfs entry [PATCH 1/4]
- Consequently modifying previously arch_freq_get_on_cpu to match reqs for new
sysfs attribute
- Dropping an idea of considering a CPU that has been idle for a while as a
valid source of information for obtaining an AMU-counter based frequency
- Some minor cosmetic changes

v6:
- delay allocating cpumask for AMU FIE support instead of invalidating the mask
upon failure to register cpufreq policy notifications
- drop the change to cpufreq core (for cpuinfo_cur_freq) as this one will be
sent as a separate change

v5:
- Fix invalid access to cpumask
- Reworked finding reference cpu when getting the freq

v4:
- dropping seqcount
- fixing identifying active cpu within given policy
- skipping full dynticks cpus when retrieving the freq
- bringing back plugging in arch_freq_get_on_cpu into cpuinfo_cur_freq

v3:
- dropping changes to cpufreq_verify_current_freq
- pulling in changes from Ionela initializing capacity_freq_ref to 0
(thanks for that!) and applying suggestions made by her during last review:
- switching to arch_scale_freq_capacity and arch_scale_freq_ref when
reversing freq scale factor computation
- swapping shift with multiplication
- adding time limit for considering last scale update as valid
- updating frequency scale factor upon entering idle

v2:
- Splitting the patches
- Adding comment for full dyntick mode
- Plugging arch_freq_get_on_cpu into cpufreq_verify_current_freq instead
of in show_cpuinfo_cur_freq to allow the framework to stay more in sync
with potential freq changes

Beata Michalska (4):
cpufreq: Introduce an optional cpuinfo_avg_freq sysfs entry
arm64: amu: Delay allocating cpumask for AMU FIE support
arm64: Provide an AMU-based version of arch_freq_avg_get_on_cpu
arm64: Update AMU-based freq scale factor on entering idle

Documentation/admin-guide/pm/cpufreq.rst | 10 ++
arch/arm64/kernel/topology.c | 144 +++++++++++++++++++----
drivers/cpufreq/cpufreq.c | 31 +++++
include/linux/cpufreq.h | 1 +
4 files changed, 164 insertions(+), 22 deletions(-)

--
2.25.1