Re: [PATCH v2 0/5] Add support for PCIe3 on x1e80100

[Krishna Chaitanya Chundru]

Hi qiang,

In next series can you add logic in controller driver
to have new ops for this x1e80100 since this hardware
has smmuv3 support but currently the ops_1_9_0 ops which
is being used has configuring bdf to sid table which will
be not present for this devices.


- Krishna Chaitanya.

On 9/13/2024 2:07 PM, Qiang Yu wrote:
> This series add support for PCIe3 on x1e80100.
>
> PCIe3 needs additional set of clocks, regulators and new set of PCIe QMP
> PHY configuration compare other PCIe instances on x1e80100. Hence add
> required resource configuration and usage for PCIe3.
>
> v2->v1:
> 1. Squash [PATCH 1/8], [PATCH 2/8],[PATCH 3/8] into one patch and make the
>     indentation consistent.
> 2. Put dts patch at the end of the patchset.
> 3. Put dt-binding patch at the first of the patchset.
> 4. Add a new patch where opp-table is added in dt-binding to avoid dtbs
>     checking error.
> 5. Remove GCC_PCIE_3_AUX_CLK, RPMH_CXO_CLK, put in TCSR_PCIE_8L_CLKREF_EN
>     as ref.
> 6. Remove lane_broadcasting.
> 7. Add 64 bit bar, Remove GCC_PCIE_3_PIPE_CLK_SRC,
>     GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK is changed to
>     GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK.
> 8. Add Reviewed-by tag.
> 9. Remove [PATCH 7/8], [PATCH 8/8].
>
> Qiang Yu (5):
>    dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100
>      QMP PCIe PHY Gen4 x8
>    dt-bindings: PCI: qcom: Add OPP table for X1E80100
>    phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3
>    clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
>    arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
>
>   .../bindings/pci/qcom,pcie-x1e80100.yaml      |   4 +
>   .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml       |   3 +
>   arch/arm64/boot/dts/qcom/x1e80100.dtsi        | 202 ++++++++++++++++-
>   drivers/clk/qcom/gcc-x1e80100.c               |  10 +-
>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 211 ++++++++++++++++++
>   .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h    |  25 +++
>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_30.h |  19 ++
>   7 files changed, 468 insertions(+), 6 deletions(-)
>   create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_30.h
>   create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_30.h