Re: [PATCH v5 1/3] dt-bindings: iio: adc: add a7779 doc

[Jonathan Cameron]

On Thu, 12 Sep 2024 15:15:45 +0300
Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx> wrote:

> Add dt bindings for AD7779 8-channel, simultaneous sampling ADC
> family with eight full Σ-Δ ADCs on chip and ultra-low input
> current to allow direct sensor connection.
Typo in device name in the title

Also no need to say 'doc' when in dt-bindings.
dt-bindings: iio: adc: add adi,ad7779

> 
> Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@xxxxxxxxxx>
> ---
>  .../bindings/iio/adc/adi,ad7779.yaml          | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> new file mode 100644
> index 000000000000..0ed5ec5dd8fe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs
> +
> +maintainers:
> +  - Ramona Nechita <ramona.nechita@xxxxxxxxxx>
> +
> +description: |
> +  The AD777X family consist of 8-channel, simultaneous sampling analog-to-
> +  digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The
> +  AD7771 provides an ultralow input current to allow direct sensor
> +  connection. Each input channel has a programmable gain stage
> +  allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor
> +  outputs into the full-scale ADC input range, maximizing the
> +  dynamic range of the signal chain.
> +
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf
> +
> +$ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad7770
> +      - adi,ad7771
> +      - adi,ad7779

No power in general?

All power supplies should be listed and if they need to have voltage
on them for the device to function they should be in the required list.

I left feedback on this and alert gpios in review of v4.
Please address that as well for v6.



> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      Interrupt line for DRDY signal which indicates the end of conversion
> +      independently of the interface selected to read back the Σ-∆ conversion.
> +
> +  start-gpios:
> +    description:
> +      Pin that controls start synchronization pulse.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        adc@0 {
> +          compatible = "adi,ad7779";
> +          reg = <0>;
> +          vref-supply = <&vref>;
> +          start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
> +          reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
> +          clocks = <&adc_clk>;
> +        };
> +    };
> +...