[PATCH 1/1] acerhdf: clean-up and remove interval parameter
From: Peter Kaestle
Date: Sun Sep 15 2024 - 13:40:19 EST
refactoring and cleaning up:
* calling acerhdf_check_param() inside acerhdf_register_thermal()
to ensure the trip points are setup according the values given
for fanon/fanoff parameters when doing modprobe.
* remove dynamical kernelmode handling, as users anyhow enable
kernelmode already at insmod / modprobe and it simplifies the
code and testing a lot.
* beautify return code handling in acerhdf_register_thermal().
* removal of interval parameter as the thermal layer is handling
it differently now and the original intention of lowering the
temperature polling frequency does not work the same anymore.
Signed-off-by: Peter Kästle <peter@xxxxxxxx>
---
drivers/platform/x86/acerhdf.c | 95 +++++-----------------------------
1 file changed, 12 insertions(+), 83 deletions(-)
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 018c48429616..e3e9c2cb73a7 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -4,7 +4,7 @@
* of the aspire one netbook, turns on/off the fan
* as soon as the upper/lower threshold is reached.
*
- * (C) 2009 - Peter Kaestle peter (a) piie.net
+ * (C) 2024 - Peter Kaestle peter (a) piie.net
* https://piie.net
* 2009 Borislav Petkov bp (a) alien8.de
*
@@ -37,7 +37,7 @@
*/
#undef START_IN_KERNEL_MODE
-#define DRV_VER "0.7.0"
+#define DRV_VER "1.0.0"
/*
* According to the Atom N270 datasheet,
@@ -51,6 +51,7 @@
#define ACERHDF_TEMP_CRIT 89000
#define ACERHDF_FAN_OFF 0
#define ACERHDF_FAN_AUTO 1
+#define ACERHDF_INTERVAL 1000
/*
* No matter what value the user puts into the fanon variable, turn on the fan
@@ -58,20 +59,12 @@
*/
#define ACERHDF_MAX_FANON 80000
-/*
- * Maximum interval between two temperature checks is 15 seconds, as the die
- * can get hot really fast under heavy load (plus we shouldn't forget about
- * possible impact of _external_ aggressive sources such as heaters, sun etc.)
- */
-#define ACERHDF_MAX_INTERVAL 15
-
#ifdef START_IN_KERNEL_MODE
static int kernelmode = 1;
#else
static int kernelmode;
#endif
-static unsigned int interval = 10;
static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
static unsigned int verbose;
@@ -328,7 +321,7 @@ static void acerhdf_change_fanstate(int state)
}
}
-static void acerhdf_check_param(struct thermal_zone_device *thermal)
+static void acerhdf_check_param(void)
{
if (fanon > ACERHDF_MAX_FANON) {
pr_err("fanon temperature too high, set to %d\n",
@@ -344,24 +337,10 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
trips[0].temperature = fanon;
trips[0].hysteresis = fanon - fanoff;
-
- if (kernelmode) {
- if (interval > ACERHDF_MAX_INTERVAL) {
- pr_err("interval too high, set to %d\n",
- ACERHDF_MAX_INTERVAL);
- interval = ACERHDF_MAX_INTERVAL;
- }
-
- if (verbose)
- pr_notice("interval changed to: %d\n", interval);
- }
}
/*
- * This is the thermal zone callback which does the delayed polling of the fan
- * state. We do check /sysfs-originating settings here in acerhdf_check_param()
- * as late as the polling interval is since we can't do that in the respective
- * accessors of the module parameters.
+ * Thermal zone callback used to poll the temperature
*/
static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal, int *t)
{
@@ -410,33 +389,9 @@ static int acerhdf_unbind(struct thermal_zone_device *thermal,
static inline void acerhdf_revert_to_bios_mode(void)
{
acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
- kernelmode = 0;
pr_notice("kernel mode fan control OFF\n");
}
-static inline void acerhdf_enable_kernelmode(void)
-{
- kernelmode = 1;
-
- pr_notice("kernel mode fan control ON\n");
-}
-
-/*
- * set operation mode;
- * enabled: the thermal layer of the kernel takes care about
- * the temperature and the fan.
- * disabled: the BIOS takes control of the fan.
- */
-static int acerhdf_change_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode mode)
-{
- if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
- acerhdf_revert_to_bios_mode();
- else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
- acerhdf_enable_kernelmode();
-
- return 0;
-}
static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
int *temperature)
@@ -450,7 +405,6 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
.bind = acerhdf_bind,
.unbind = acerhdf_unbind,
.get_temp = acerhdf_get_ec_temp,
- .change_mode = acerhdf_change_mode,
.get_crit_temp = acerhdf_get_crit_temp,
};
@@ -584,13 +538,11 @@ static int __init acerhdf_check_hardware(void)
if (force_bios[0]) {
version = force_bios;
pr_info("forcing BIOS version: %s\n", version);
- kernelmode = 0;
}
if (force_product[0]) {
product = force_product;
pr_info("forcing BIOS product: %s\n", product);
- kernelmode = 0;
}
if (verbose)
@@ -627,10 +579,8 @@ static int __init acerhdf_check_hardware(void)
* if started with kernel mode off, prevent the kernel from switching
* off the fan
*/
- if (!kernelmode) {
- pr_notice("Fan control off, to enable do:\n");
- pr_notice("echo -n \"enabled\" > /sys/class/thermal/thermal_zoneN/mode # N=0,1,2...\n");
- }
+ if (!kernelmode)
+ pr_notice("Fan control off, to enable insmod/modprobe with 'kernelmode=1'\n");
return 0;
}
@@ -669,7 +619,7 @@ static void acerhdf_unregister_platform(void)
static int __init acerhdf_register_thermal(void)
{
- int ret;
+ int ret = 0;
cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
&acerhdf_cooling_ops);
@@ -677,10 +627,12 @@ static int __init acerhdf_register_thermal(void)
if (IS_ERR(cl_dev))
return -EINVAL;
+ acerhdf_check_param();
+
thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
NULL, &acerhdf_dev_ops,
&acerhdf_zone_params, 0,
- (kernelmode) ? interval*1000 : 0);
+ ACERHDF_INTERVAL);
if (IS_ERR(thz_dev))
return -EINVAL;
@@ -688,10 +640,8 @@ static int __init acerhdf_register_thermal(void)
ret = thermal_zone_device_enable(thz_dev);
else
ret = thermal_zone_device_disable(thz_dev);
- if (ret)
- return ret;
- return 0;
+ return ret;
}
static void acerhdf_unregister_thermal(void)
@@ -769,24 +719,3 @@ MODULE_ALIAS("dmi:*:*Acer*:pnExtensa*5420*:");
module_init(acerhdf_init);
module_exit(acerhdf_exit);
-
-static int interval_set_uint(const char *val, const struct kernel_param *kp)
-{
- int ret;
-
- ret = param_set_uint(val, kp);
- if (ret)
- return ret;
-
- acerhdf_check_param(thz_dev);
-
- return 0;
-}
-
-static const struct kernel_param_ops interval_ops = {
- .set = interval_set_uint,
- .get = param_get_uint,
-};
-
-module_param_cb(interval, &interval_ops, &interval, 0000);
-MODULE_PARM_DESC(interval, "Polling interval of temperature check");
--
2.46.1