Re: [PATCH v2 2/5] clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490

[Krzysztof Kozlowski]

On 16/09/2024 10:55, Dmitry Baryshkov wrote:
> On Mon, Sep 16, 2024 at 10:33:21AM GMT, Krzysztof Kozlowski wrote:
>> On 13/09/2024 07:31, Taniya Das wrote:
>>>
>>>
>>> On 8/17/2024 2:55 PM, Krzysztof Kozlowski wrote:
>>>> On 16/08/2024 10:32, Taniya Das wrote:
>>>>> On the QCM6490 boards the LPASS firmware controls the complete clock
>>>>> controller functionalities. But the LPASS resets are required to be
>>>>> controlled from the high level OS. The Audio SW driver should be able to
>>>>> assert/deassert the audio resets as required. Thus in clock driver add
>>>>> support for the resets.
>>>>>
>>>>> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
>>>>> ---
>>>>>   drivers/clk/qcom/lpassaudiocc-sc7280.c | 23 +++++++++++++++++++----
>>>>>   1 file changed, 19 insertions(+), 4 deletions(-)
>>>>>
>>>>> diff --git a/drivers/clk/qcom/lpassaudiocc-sc7280.c b/drivers/clk/qcom/lpassaudiocc-sc7280.c
>>>>> index 45e726477086..b64393089263 100644
>>>>> --- a/drivers/clk/qcom/lpassaudiocc-sc7280.c
>>>>> +++ b/drivers/clk/qcom/lpassaudiocc-sc7280.c
>>>>> @@ -1,6 +1,7 @@
>>>>>   // SPDX-License-Identifier: GPL-2.0-only
>>>>>   /*
>>>>>    * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>>>>> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
>>>>>    */
>>>>>   
>>>>>   #include <linux/clk-provider.h>
>>>>> @@ -713,14 +714,24 @@ static const struct qcom_reset_map lpass_audio_cc_sc7280_resets[] = {
>>>>>   	[LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
>>>>>   };
>>>>>   
>>>>> +static const struct regmap_config lpass_audio_cc_sc7280_reset_regmap_config = {
>>>>> +	.name = "lpassaudio_cc_reset",
>>>>> +	.reg_bits = 32,
>>>>> +	.reg_stride = 4,
>>>>> +	.val_bits = 32,
>>>>> +	.fast_io = true,
>>>>> +	.max_register = 0xc8,
>>>>> +};
>>>>> +
>>>>>   static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = {
>>>>> -	.config = &lpass_audio_cc_sc7280_regmap_config,
>>>>> +	.config = &lpass_audio_cc_sc7280_reset_regmap_config,
>>>>>   	.resets = lpass_audio_cc_sc7280_resets,
>>>>>   	.num_resets = ARRAY_SIZE(lpass_audio_cc_sc7280_resets),
>>>>>   };
>>>>>   
>>>>>   static const struct of_device_id lpass_audio_cc_sc7280_match_table[] = {
>>>>> -	{ .compatible = "qcom,sc7280-lpassaudiocc" },
>>>>> +	{ .compatible = "qcom,qcm6490-lpassaudiocc", .data = &lpass_audio_cc_reset_sc7280_desc },
>>>>
>>>> That's odd to see sc7280 reset added for qcm6490, but not used fot
>>>> sc7280 at all. Didn't you mean here lpass_audio_cc_qcm6409_desc?
>>>>
>>>>
>>> The resets descriptor(lpass_audio_cc_reset_sc7280_desc) is not part of 
>>> the global clock descriptor(lpass_cc_sc7280_desc) as these are part of 
>>> different regmaps.
>>>
>>> On a non-QCM6490(SC7280) boards the resets are registered after the 
>>> global descriptor is registered.
>>>
>>> But on QCM6490 board we need to register only the reset descriptor and 
>>> no clocks are to be handled/registered and thus passed the match data 
>>> for QCM6490 boards only.
>>
>> Yeah, but why this is sc7280?
> 
> Because it's more or less the same HW, different TZ and hyp firmware?
> 

Hm, ok, probably I missed something from the context.

Best regards,
Krzysztof