Re: [PATCH v2 1/2] can: m_can: set init flag earlier in probe
From: Markus Schneider-Pargmann
Date: Mon Sep 23 2024 - 04:12:12 EST
On Thu, Sep 19, 2024 at 01:27:27PM GMT, Matthias Schiffer wrote:
> While an m_can controller usually already has the init flag from a
> hardware reset, no such reset happens on the integrated m_can_pci of the
> Intel Elkhart Lake. If the CAN controller is found in an active state,
> m_can_dev_setup() would fail because m_can_niso_supported() calls
> m_can_cccr_update_bits(), which refuses to modify any other configuration
> bits when CCCR_INIT is not set.
>
> To avoid this issue, set CCCR_INIT before attempting to modify any other
> configuration flags.
>
> Fixes: cd5a46ce6fa6 ("can: m_can: don't enable transceiver when probing")
> Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
> ---
>
> v2: no changes
>
> drivers/net/can/m_can/m_can.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 012c3d22b01dd..47481afb9add3 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -1681,6 +1681,14 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
> return -EINVAL;
> }
>
> + /* Forcing standby mode should be redundant, as the chip should be in
> + * standby after a reset. Write the INIT bit anyways, should the chip
> + * be configured by previous stage.
> + */
Could you please update the comment to reflect your findings?
Best
Markus
> + err = m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
> + if (err)
> + return err;
> +
> if (!cdev->is_peripheral)
> netif_napi_add(dev, &cdev->napi, m_can_poll);
>
> @@ -1732,11 +1740,7 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
> return -EINVAL;
> }
>
> - /* Forcing standby mode should be redundant, as the chip should be in
> - * standby after a reset. Write the INIT bit anyways, should the chip
> - * be configured by previous stage.
> - */
> - return m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
> + return 0;
> }
>
> static void m_can_stop(struct net_device *dev)
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
>