Hi Guenter,
On Tue, 24 Sept 2024 at 19:42, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
With that, driver would take the current chip configuration as default &
On 9/24/24 02:29, Naresh Solanki wrote:
Hi Guenter,
Sorry for the late reply,
On Fri, 28 Jun 2024 at 20:30, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
I agree with you. It is best to have some defaults & then overwrite
On 6/28/24 04:54, Naresh Solanki wrote:
Remove platform data & add devicetree support.
Unless I am missing something, this doesn't just add devicetree support,
it actually _mandates_ devicetree support. There are no defaults.
That is not acceptable.
based on DT properties.
But in that case we would have to assume that all fans are enabled
irrespective of their hardware connections in the schematics(example
fan_enable).
I'm not sure if that is fine. But if you feel that is alright then
I'll rewrite the driver to assume
everything is enabled with default values.
That would still be a functional change, or am I missing something ?
It would overwrite any configuration written by a BIOS/ROMMON.
just configure specific config specified in DT(if any) & continue with
initialization?