Re: [PATCH net v3 1/2] net: phy: aquantia: AQR115c fix up PMA capabilities

[Russell King (Oracle)]

On Wed, Sep 25, 2024 at 04:01:28PM -0700, Abhishek Chauhan wrote:
> diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
> index e982e9ce44a5..88ba12aaf6e0 100644
> --- a/drivers/net/phy/aquantia/aquantia_main.c
> +++ b/drivers/net/phy/aquantia/aquantia_main.c
> @@ -767,6 +767,33 @@ static int aqr111_config_init(struct phy_device *phydev)
>  	return aqr107_config_init(phydev);
>  }
>  
> +static int aqr115c_get_features(struct phy_device *phydev)
> +{
> +	int ret;
> +	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };

Networking uses reverse-christmas tree ordering for variables. Please
swap the order of these.

Also, I think this would be better:

	unsigned long *supported = phydev->supported;

You don't actually need a separate mask.

> +
> +	/* Normal feature discovery */
> +	ret = genphy_c45_pma_read_abilities(phydev);
> +	if (ret)
> +		return ret;
> +
> +	/* PHY FIXUP */
> +	/* Although the PHY sets bit 12.18.19.48, it does not support 5G/10G modes */
> +	linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported);
> +	linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, phydev->supported);
> +	linkmode_clear_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, phydev->supported);
> +	linkmode_clear_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, phydev->supported);

For the above four, s/phydev->supported/supported/

> +
> +	/* Phy supports Speeds up to 2.5G with Autoneg though the phy PMA says otherwise */
> +	linkmode_copy(supported, phy_gbit_features);
> +	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, supported);
> +	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, supported);
> +
> +	linkmode_or(phydev->supported, supported, phydev->supported);

Drop this linkmode_or().

You'll then be modifying phydev->supported directly, which is totally
fine.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!