[PATCH] PCI: pciehp: Fix system hang on resume after hot-unplug during suspend

[Chia-Lin Kao (AceLan)]

Remove unnecessary pci_walk_bus() call in pciehp_resume_noirq(). This
fixes a system hang that occurs when resuming after a Thunderbolt dock
with attached thunderbolt storage is unplugged during system suspend.

The PCI core already handles setting the disconnected state for devices
under a port during suspend/resume. The redundant bus walk was
interfering with proper hardware state detection during resume, causing
a system hang when hot-unplugging daisy-chained Thunderbolt devices.

Fixes: 9d573d19547b ("PCI: pciehp: Detect device replacement during system sleep")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@xxxxxxxxxxxxx>
---
 drivers/pci/hotplug/pciehp_core.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index ff458e692fed..c1c3f7e2bc43 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -330,8 +330,6 @@ static int pciehp_resume_noirq(struct pcie_device *dev)
 		 */
 		if (pciehp_device_replaced(ctrl)) {
 			ctrl_dbg(ctrl, "device replaced during system sleep\n");
-			pci_walk_bus(ctrl->pcie->port->subordinate,
-				     pci_dev_set_disconnected, NULL);
 			pciehp_request(ctrl, PCI_EXP_SLTSTA_PDC);
 		}
 	}
-- 
2.43.0