Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
From: Jonathan Cameron
Date: Sat Sep 28 2024 - 10:31:29 EST
> >> +
> >> + ret = ad7779_reset(indio_dev, reset_gpio);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + ad7779_powerup(st, start_gpio);
> >> + if (ret)
> >> + return ret;
> >What powers the device down again if we hit an error?
> >
> >Probably need a devm_add_action_or_reset() or if it self powers down may a comment on that.
>
> In the powerup function there are only some register writes and the start gpio is only a synchronization pulse (perhaps the name powerup is not very appropriate),
> would an action or reset be necessary in this case? Since the regulators are not used in the driver, should there be a function disabling them anyway?
>
If there is nothing useful to do indeed not but when I see
a power up, I rather expect a power down. Is there anything
that can do that or is it a case of it will go to sleep anyway
for some other reason?
Jonathan
>
> Best Regards,
> Ramona
>