Re: [PATCH net-next v3] net: dsa: mv88e6xxx: Support LED control

[Andrew Lunn]

> @@ -5396,6 +5426,7 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
>  	.port_disable_learn_limit = mv88e6xxx_port_disable_learn_limit,
>  	.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
>  	.port_get_cmode = mv88e6352_port_get_cmode,
> +	.port_setup_leds = mv88e6xxx_port_setup_leds,
>  	.port_setup_message_port = mv88e6xxx_setup_message_port,
>  	.stats_snapshot = mv88e6320_g1_stats_snapshot,
>  	.stats_set_histogram = mv88e6095_g1_stats_set_histogram,

This code should work for all members of the 6352 family: 6172 6176
6240 6352. Please add this op to them all.

> +static int mv88e6xxx_led_match_selector(struct mv88e6xxx_port *p, int led, bool blink_activity,
> +					bool fiber, unsigned long rules, u16 *selector)
> +{
> +	const struct mv88e6xxx_led_hwconfig *conf;
> +	int i;
> +
> +	/* No rules means we turn the LED off */
> +	if (!rules) {
> +		if (led == 1)
> +			*selector |= MV88E6XXX_PORT_LED_CONTROL_LED1_SELE;
> +		else
> +			*selector |= MV88E6XXX_PORT_LED_CONTROL_LED0_SELE;
> +		return 0;
> +	}
> +
> +	/* TODO: these rules are for MV88E6352, when adding other families,
> +	 * think abour making sure you select the table that match the

about

> --- a/drivers/net/dsa/mv88e6xxx/port.c
> +++ b/drivers/net/dsa/mv88e6xxx/port.c
> @@ -12,6 +12,7 @@
>  #include <linux/if_bridge.h>
>  #include <linux/phy.h>
>  #include <linux/phylink.h>
> +#include <linux/property.h>
>  
>  #include "chip.h"
>  #include "global2.h"
> diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h

I suspect that additional include is not needed, since there are no
other changes to port.c

	Andrew