[net-next v2 1/1] hv_netvsc: Link queues to NAPIs

[Joe Damato]

Use netif_queue_set_napi to link queues to NAPI instances so that they
can be queried with netlink.

Shradha Gupta tested the patch and reported that the results are
as expected:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                           --dump queue-get --json='{"ifindex": 2}'

 [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
  {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
  {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
  {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
  {'id': 4, 'ifindex': 2, 'napi-id': 8197, 'type': 'rx'},
  {'id': 5, 'ifindex': 2, 'napi-id': 8198, 'type': 'rx'},
  {'id': 6, 'ifindex': 2, 'napi-id': 8199, 'type': 'rx'},
  {'id': 7, 'ifindex': 2, 'napi-id': 8200, 'type': 'rx'},
  {'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'},
  {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'tx'},
  {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'},
  {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'},
  {'id': 4, 'ifindex': 2, 'napi-id': 8197, 'type': 'tx'},
  {'id': 5, 'ifindex': 2, 'napi-id': 8198, 'type': 'tx'},
  {'id': 6, 'ifindex': 2, 'napi-id': 8199, 'type': 'tx'},
  {'id': 7, 'ifindex': 2, 'napi-id': 8200, 'type': 'tx'}]

Signed-off-by: Joe Damato <jdamato@xxxxxxxxxx>
Reviewed-by: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
Tested-by: Shradha Gupta <shradhagupta@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/hyperv/netvsc.c       | 13 ++++++++++++-
 drivers/net/hyperv/rndis_filter.c |  9 +++++++--
 2 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 2b6ec979a62f..9afb08dbc350 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -712,8 +712,13 @@ void netvsc_device_remove(struct hv_device *device)
 	for (i = 0; i < net_device->num_chn; i++) {
 		/* See also vmbus_reset_channel_cb(). */
 		/* only disable enabled NAPI channel */
-		if (i < ndev->real_num_rx_queues)
+		if (i < ndev->real_num_rx_queues) {
+			netif_queue_set_napi(ndev, i, NETDEV_QUEUE_TYPE_TX,
+					     NULL);
+			netif_queue_set_napi(ndev, i, NETDEV_QUEUE_TYPE_RX,
+					     NULL);
 			napi_disable(&net_device->chan_table[i].napi);
+		}
 
 		netif_napi_del(&net_device->chan_table[i].napi);
 	}
@@ -1787,6 +1792,10 @@ struct netvsc_device *netvsc_device_add(struct hv_device *device,
 	netdev_dbg(ndev, "hv_netvsc channel opened successfully\n");
 
 	napi_enable(&net_device->chan_table[0].napi);
+	netif_queue_set_napi(ndev, 0, NETDEV_QUEUE_TYPE_RX,
+			     &net_device->chan_table[0].napi);
+	netif_queue_set_napi(ndev, 0, NETDEV_QUEUE_TYPE_TX,
+			     &net_device->chan_table[0].napi);
 
 	/* Connect with the NetVsp */
 	ret = netvsc_connect_vsp(device, net_device, device_info);
@@ -1805,6 +1814,8 @@ struct netvsc_device *netvsc_device_add(struct hv_device *device,
 
 close:
 	RCU_INIT_POINTER(net_device_ctx->nvdev, NULL);
+	netif_queue_set_napi(ndev, 0, NETDEV_QUEUE_TYPE_TX, NULL);
+	netif_queue_set_napi(ndev, 0, NETDEV_QUEUE_TYPE_RX, NULL);
 	napi_disable(&net_device->chan_table[0].napi);
 
 	/* Now, we can close the channel safely */
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index ecc2128ca9b7..c0ceeef4fcd8 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1269,10 +1269,15 @@ static void netvsc_sc_open(struct vmbus_channel *new_sc)
 	ret = vmbus_open(new_sc, netvsc_ring_bytes,
 			 netvsc_ring_bytes, NULL, 0,
 			 netvsc_channel_cb, nvchan);
-	if (ret == 0)
+	if (ret == 0) {
 		napi_enable(&nvchan->napi);
-	else
+		netif_queue_set_napi(ndev, chn_index, NETDEV_QUEUE_TYPE_RX,
+				     &nvchan->napi);
+		netif_queue_set_napi(ndev, chn_index, NETDEV_QUEUE_TYPE_TX,
+				     &nvchan->napi);
+	} else {
 		netdev_notice(ndev, "sub channel open failed: %d\n", ret);
+	}
 
 	if (atomic_inc_return(&nvscdev->open_chn) == nvscdev->num_chn)
 		wake_up(&nvscdev->subchan_open);
-- 
2.34.1