[PATCH v3 0/3] Add the dwmac driver support for T-HEAD TH1520 SoC

[Drew Fustini]

This series is based on 6.12-rc1 and depends on this pinctrl series:

 20240930-th1520-pinctrl-v3-0-32cea2bdbecb@xxxxxxxxxxxxxxx

I have a branch with this series and the dependencies:

 https://github.com/pdp7/linux/tree/b4/th1520-dwmac

Regarding clocks, the gmac nodes in th1520.dtsi have the "stmmac_clk"
clock set to CLK_GMAC_AXI in the AP_SUBSYS clock controller. This
corresponds to the enable bit for the GMAC axi4_clk gate which is
handled by the clk-th1520-ap driver. thead_dwmac_fix_speed() does not
modify anything in the AP_SUBSYS clock controller. It only writes to
GMAC APB registers. It seems unnecessary to create a new clock driver
just for the GMAC APB registers. Refer to section 1.6.2 in the TH1520
Peripheral Interface User Manual [1].

I've removed the properties that I added in v2: thead,rx-internal-delay
and thead,tx-internal-delay. The units for the delay field in the rgmii
delay control registers are not documented. Andrew Lunn suggested I
just hard code the delay field to 0 since I don't know the units and
the boards work with the hardware reset value of 0.

[1] https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs

Changes in v3:
 - Rebase on v6.12-rc1
 - Remove thead,rx-internal-delay and thead,tx-internal-delay properties
 - Remove unneeded call to thead_dwmac_fix_speed() during probe
 - Fix filename for the yaml file in MAINTAINERS patch

Changes in v2:
 - Drop the first patch as it is no longer needed due to upstream commit
   d01e0e98de31 ("dt-bindings: net: dwmac: Validate PBL for all IP-cores")
 - Rename compatible from "thead,th1520-dwmac" to "thead,th1520-gmac"
 - Add thead,rx-internal-delay and thead,tx-internal-delay properties
   and check that it does not exceed the maximum value
 - Convert from stmmac_dvr_probe() to devm_stmmac_pltfr_probe() and
   delete the .remove_new hook as it is no longer needed
 - Handle return value of regmap_write() in case it fails
 - Add phy reset delay properties to the BeagleV Ahead device tree
 - Link: https://lore.kernel.org/linux-riscv/20240926-th1520-dwmac-v2-0-f34f28ad1dc9@xxxxxxxxxxxxxxx/

Changes in v1:
 - remove thead,gmacapb that references syscon for APB registers
 - add a second memory region to gmac nodes for the APB registers
 - Link: https://lore.kernel.org/all/20240713-thead-dwmac-v1-0-81f04480cd31@xxxxxxxxxxxxxxx/

---
Emil Renner Berthing (1):
      riscv: dts: thead: Add TH1520 ethernet nodes

Jisheng Zhang (2):
      dt-bindings: net: Add T-HEAD dwmac support
      net: stmmac: Add glue layer for T-HEAD TH1520 SoC

 .../devicetree/bindings/net/snps,dwmac.yaml        |   1 +
 .../devicetree/bindings/net/thead,th1520-gmac.yaml |  97 +++++++
 MAINTAINERS                                        |   2 +
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts |  91 +++++++
 .../boot/dts/thead/th1520-lichee-module-4a.dtsi    | 129 +++++++++
 arch/riscv/boot/dts/thead/th1520.dtsi              |  50 ++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  11 +
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c  | 291 +++++++++++++++++++++
 9 files changed, 673 insertions(+)
---
base-commit: 6b16e599500bd0002164d9edcb8bf7652d9888fa
change-id: 20240930-th1520-dwmac-34f5dd0cccf8

Best regards,
-- 
Drew Fustini <dfustini@xxxxxxxxxxxxxxx>