[PATCH v5 06/10] drm/bridge: it6505: fix HDCP encryption when R0 ready

[Hermes Wu]

From: Hermes Wu <Hermes.wu@xxxxxxxxxx>

When starting HDCP authentication, HDCP encryption should be enabled when R0'is checked.

Change encryption enables time at R0' ready.
The hardware HDCP engine trigger is changed and the repeater KSV fails will restart HDCP.

Signed-off-by: Hermes Wu <Hermes.wu@xxxxxxxxxx>
---
 drivers/gpu/drm/bridge/ite-it6505.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 0591715c53f7..319351bc2c9d 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -2091,15 +2091,12 @@ static void it6505_hdcp_wait_ksv_list(struct work_struct *work)
 	ksv_list_check = it6505_hdcp_part2_ksvlist_check(it6505);
 	DRM_DEV_DEBUG_DRIVER(dev, "ksv list ready, ksv list check %s",
 			     ksv_list_check ? "pass" : "fail");
-	if (ksv_list_check) {
-		it6505_set_bits(it6505, REG_HDCP_TRIGGER,
-				HDCP_TRIGGER_KSV_DONE, HDCP_TRIGGER_KSV_DONE);
+
+	if (ksv_list_check)
 		return;
-	}
+
 timeout:
-	it6505_set_bits(it6505, REG_HDCP_TRIGGER,
-			HDCP_TRIGGER_KSV_DONE | HDCP_TRIGGER_KSV_FAIL,
-			HDCP_TRIGGER_KSV_DONE | HDCP_TRIGGER_KSV_FAIL);
+	it6505_start_hdcp(it6505);
 }
 
 static void it6505_hdcp_work(struct work_struct *work)
@@ -2472,7 +2469,11 @@ static void it6505_irq_hdcp_ksv_check(struct it6505 *it6505)
 {
 	struct device *dev = it6505->dev;
 
-	DRM_DEV_DEBUG_DRIVER(dev, "HDCP event Interrupt");
+	DRM_DEV_DEBUG_DRIVER(dev, "HDCP repeater R0 event Interrupt");
+	/* 1B01 HDCP encription should start when R0 is ready*/
+	it6505_set_bits(it6505, REG_HDCP_TRIGGER,
+			HDCP_TRIGGER_KSV_DONE, HDCP_TRIGGER_KSV_DONE);
+
 	schedule_work(&it6505->hdcp_wait_ksv_list);
 }
 
-- 
2.34.1