Re: [PATCH 3/3] gpio: xilinx: use generic device properties

[Michal Simek]

On 9/30/24 16:48, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> OF-specific routines should not be used unless necessary. Generic device
> properties are preferred so switch to using them in the driver code.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>   drivers/gpio/gpio-xilinx.c | 16 +++++++---------
>   1 file changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
> index d99824d42c77..41c552a58059 100644
> --- a/drivers/gpio/gpio-xilinx.c
> +++ b/drivers/gpio/gpio-xilinx.c
> @@ -15,7 +15,6 @@
>   #include <linux/io.h>
>   #include <linux/irq.h>
>   #include <linux/module.h>
> -#include <linux/of.h>
>   #include <linux/platform_device.h>
>   #include <linux/pm_runtime.h>
>   #include <linux/slab.h>
> @@ -564,7 +563,6 @@ static int xgpio_probe(struct platform_device *pdev)
>   	struct device *dev = &pdev->dev;
>   	struct xgpio_instance *chip;
>   	int status = 0;
> -	struct device_node *np = dev->of_node;
>   	u32 is_dual = 0;
>   	u32 width[2];
>   	u32 state[2];
> @@ -579,7 +577,7 @@ static int xgpio_probe(struct platform_device *pdev)
>   	platform_set_drvdata(pdev, chip);
>   
>   	/* First, check if the device is dual-channel */
> -	of_property_read_u32(np, "xlnx,is-dual", &is_dual);
> +	device_property_read_u32(dev, "xlnx,is-dual", &is_dual);
>   
>   	/* Setup defaults */
>   	memset32(width, 0, ARRAY_SIZE(width));
> @@ -587,14 +585,14 @@ static int xgpio_probe(struct platform_device *pdev)
>   	memset32(dir, 0xFFFFFFFF, ARRAY_SIZE(dir));
>   
>   	/* Update GPIO state shadow register with default value */
> -	of_property_read_u32(np, "xlnx,dout-default", &state[0]);
> -	of_property_read_u32(np, "xlnx,dout-default-2", &state[1]);
> +	device_property_read_u32(dev, "xlnx,dout-default", &state[0]);
> +	device_property_read_u32(dev, "xlnx,dout-default-2", &state[1]);
>   
>   	bitmap_from_arr32(chip->state, state, 64);
>   
>   	/* Update GPIO direction shadow register with default value */
> -	of_property_read_u32(np, "xlnx,tri-default", &dir[0]);
> -	of_property_read_u32(np, "xlnx,tri-default-2", &dir[1]);
> +	device_property_read_u32(dev, "xlnx,tri-default", &dir[0]);
> +	device_property_read_u32(dev, "xlnx,tri-default-2", &dir[1]);
>   
>   	bitmap_from_arr32(chip->dir, dir, 64);
>   
> @@ -602,13 +600,13 @@ static int xgpio_probe(struct platform_device *pdev)
>   	 * Check device node and parent device node for device width
>   	 * and assume default width of 32
>   	 */
> -	if (of_property_read_u32(np, "xlnx,gpio-width", &width[0]))
> +	if (device_property_read_u32(dev, "xlnx,gpio-width", &width[0]))
>   		width[0] = 32;
>   
>   	if (width[0] > 32)
>   		return -EINVAL;
>   
> -	if (is_dual && of_property_read_u32(np, "xlnx,gpio2-width", &width[1]))
> +	if (is_dual && device_property_read_u32(dev, "xlnx,gpio2-width", &width[1]))
>   		width[1] = 32;
>   
>   	if (width[1] > 32)

This is also fine.

Acked-by: Michal Simek <michal.simek@xxxxxxx>

Thanks,
Michal