Re: [PATCH 09/21] gpio: add driver for ADI ADSP-SC5xx platform
From: Greg Malysa
Date: Tue Oct 01 2024 - 17:58:40 EST
Hi Linus,
Thanks for the review.
> > + __adsp_gpio_writew(port, BIT(offset), ADSP_PORT_REG_INEN_SET);
>
> Interrupt enable in the direction function? No thanks, poke the
> interrupt registers in your irqchip if you make one (you currently
> do not) in this case I'd say just disable all interrupts in probe()
> using something like writew(base + ADSP_PORT_REG_INEN_SET, 0xffff)
> and be done with it.
>
This will come up next time too so I wanted to mention that INEN here
means "input enable." The PORT design has two registers for
controlling pin direction, one to enable/disable output drivers (DIR)
and one to enable input drivers (INEN) to be able to read the pin
state from the gpio data register. If I recall the bare metal
reference code toggled both but we can review if setting INEN for all
pins and leaving it is acceptable as well to simplify things.
Thanks,
Greg
--
Greg Malysa
Timesys Corporation