[PATCH 3/4] arm64: dts: imx8qxp-mek: Add PCIe support
From: Frank Li
Date: Wed Oct 02 2024 - 16:48:39 EST
Add PCIe support for i.MX8QXP MEK board.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 936ba5ecdcac7..9f643a4ce8ae7 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -45,6 +45,15 @@ usb3_data_ss: endpoint {
};
};
+ reg_pcieb: regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "mpcie_3v3";
+ gpio = <&pca9557_a 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
sound-wm8960 {
compatible = "fsl,imx-audio-wm8960";
model = "wm8960-audio";
@@ -246,6 +255,12 @@ &cm40_intmux {
status = "okay";
};
+&hsio_phy {
+ fsl,hsio-cfg = "pciea-x2-pcieb";
+ fsl,refclk-pad-mode = "input";
+ status = "okay";
+};
+
&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
@@ -272,6 +287,16 @@ &mu1_m0 {
status = "okay";
};
+&pcieb {
+ phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+ phy-names = "pcie-phy";
+ pinctrl-0 = <&pinctrl_pcieb>;
+ pinctrl-names = "default";
+ reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+ vpcie-supply = <®_pcieb>;
+ status = "okay";
+};
+
&scu_key {
status = "okay";
};
@@ -493,6 +518,14 @@ IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020
>;
};
+ pinctrl_pcieb: pcieagrp {
+ fsl,pins = <
+ IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x06000021
+ IMX8QXP_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B 0x06000021
+ IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000021
+ >;
+ };
+
pinctrl_typec: typecgrp {
fsl,pins = <
IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021
--
2.34.1